Hello Friends, Welcome back to the world of 4G.
Today we will discuss the function MAC Scheduler Module and Physical Channel.
Previously We have shown, The different functions of MAC layer, With the analogy of transportation
mechanism used in logistic companies.
In addition to that, MAC layer also contains MAC control, which performs 2 important operation.
1. As we know, during transmission and reception of data, a lot of power is consumed by the handset
So, in order to save power, the user equipment does not stay awake all the time.
In Idle mode, It wakes up at fixed intervals, to receive data through paging alert messages.
This is called Discontinuous reception or DRX operation.
now, this paging alert messages are neither processed by MAC layer, nor by Hybrid ARQ layer
since, Paging signals are retransmitted on fixed intervals, based on Discontinuous reception
or DRX inactivity timer.
So it does not depend on HARQ Ack/NACK response.
2. MAC control is also responsible for the alignment of the uplink timing and power headroom reporting.
The most important function of eNB, is to allocate resources dynamically.
This function is handled by MAC scheduler module of MAC Layer.
Previously we have discussed that MAC layer has to handle,
1. HARQ retransmission control,
2. Logical channel multiplexing and priority handling.
These functions are actually handled by MAC scheduler module.
In addition to that it has to- Dynamically Decide Modulation scheme-
The MAC scheduler gets information of the Instantaneous Radio channel quality from Users through
Channel state information message in which it sends the CQI.
Based on channel quality it decides which modulation scheme is to be used.
Now, The data in DLSCH or user plane channel contains user traffic which needs to be carried out
to Users irrespective of channel quality outside.
If the coverage is poor the network will use QPSK.
Else it will use higher Modulation schemes such as, 16QAM, 64QAM etc.
But the signalling channels need guaranteed delivery that is why they use QPSK as it is
considered the most ROBUST modulation scheme.
MAC scheduler module also has to decide, Which are the terminals to transmit.
The set of resource block upon which the downlink shared data for the mentioned terminal would delivered.
The selection of transport Block size.
These 3 functions are implemented in Physical layer.
So, as you can see, MAC scheduler module takes most of the decision.
Rest just follow accordingly.
That is why it is also called as the "Brain of LTE".
That Brings us to our last and most complex part, that is Physical Channels.
The transport channels such as Paging Channel and Downlink Shared Channel, are mapped into
Physical Downlink Shared Channel.
It is used for carrying user traffic and as well Paging information.
The Broadcast Channel and MultiCast channel are mapped one to one Physical Broadcast Channel
and Physical Multicast Channel.
Similarly in UPLINK, The transport channel such as Uplink shared
channel is mapped on to Physical Uplink Shared Channel, and Physical Random Access Channel
is used for random access functions.
Now, consider you are an user, you received some physical data from eNB, through physical channels
But you don't know in which Resource element, the Downlink shared data is hidden or, which
demodulation scheme to be use.
That is why L1 and L2 control signals are used.
They carry Downlink Control information, which contain relevant information on how to process
the physical data.
It is just like the record submitted by team Z, based on which the items are extracted
at receiving end.
The various Control signals used here are, Physical Downlink Control Channel: This channel
carries, the control information about the data being transmitted on the current subframe
and the information about the system information block, which User need to use for the transmission of uplink data
That means it is mandatory for the User to decode it successfully if it wants to send
some data or receive something.
It also provides Uplink Power control information and Hybrid ARQ info.
Physical Control Format Indicator Channel:- As the name implies, these channel informs
the user about the format of the signal being received.
It indicates the number of OFDM symbols used for the PDCCH, whether 1, 2, or 3.
The information within this channel is essential to decode PDCCH, because the user does not
have prior information about number of resource to be used in OFDM Grid.
Physical HARQ Indicator Channel:- It carries the HARQ ACK/NACK signal, indicating whether
a transport block has been correctly received.
The Control signal used in UPLINK is Physical uplink control channel, which is the counterpart
of PDCCH in downlink.
If we notice here, There are no Transport channels corresponding to Control Channels/Signals.
So far, we have seen the function of Logical, Transport and Physical channels.
But these MAC PDUs or the Transport Blocks, which are being delivered from MAC Layer to
the Physical Layer undergo a lot of Digital Signal Processing before being sent to the
air interface as RF signals.
Let us understand them with the help of Block Diagram.
CRC attach - A cyclic redundancy check (CRC)added to every transport block for error checking.
If after Adding CRC to the transport block exceeds the maximum block size, then it is
segmented to smaller code blocks, and individual CRC is added to each code blocks by a
Turbo coder, which is called as code block segmentation.
Channel coding - It's a turbo coding step, whose job is basically converting one bit
input to 3 bit output as it goes through the turbo coding processor (It means the coding rate is 1/3).
Rate matching - In simple words, the output of the Turbocoder goes through detailed process
of "interleaving", "BitCollection", "Bit Selection and pruning" and ultimately generates an encoded
bit stream
these coded streams then go through scrambling process, after that they are mapped to correct
modulation scheme which is decided by MAC scheduler, as discussed earlier.
After a precoding process, finally the bits are mapped to Resource elements and then goes
for OFDMA process.
In Uplink the same physical layer model is used only the last OFDMA block is replaced
by SC-FDMA.
Once the signal processing is complete, the resources are finally ready to be transmitted
in AIR interface.
That brings us to the End of Channels used here.
To summaries it all- Logical channels tell WHAT is the type and purpose of the Data.
Such as paging, broadcasting etc
Transport Channels decide HOW the data is going to be transmitted.
It allocates the transport block size and dynamically decides the modulation scheme
that is to be used.
Physical Channels know WHERE exactly the Resource elements are located.
It handles the Signal Processing and thus it knows HOW EXACTLY the data is going to be transmitted.
So In a nutshell we can say, We cannot transmit the data without knowing
WHERE to transmit and HOW it should be transmitted, also we cannot decide HOW a data should be
transmitted without knowing WHAT is the data.
So in hierarchy of 4G protocol stack. first LOGICAL, then TRANSPORT, Then PHYSICAL.
So Friends, Thanks for making it to the end.
In our next video we will be discussing MIMO(Multiple Input Multiple output) and Carrier Aggregation
where we will also discuss how Throughput is calculated.
You can post your doubts in the comments section.
Don't forget to share it with your friends.
:) HAPPY LEARNING :)
For more infomation >> The Magic Effects Of Dried Grapes Makes You Will unbelievable - Duration: 13:51. 
For more infomation >> С Новым Годом! Фейерверк из СИГНАЛЬНЫХ ПАТРОНОВ ОСЫ! GGS - Эпизод 20 - Duration: 4:33. 
For more infomation >> UFC 207: Nunes vs Rousey - Duration: 3:06:53. 
For more infomation >> Emekliye promosyon müjdesi - Duration: 1:25. 
For more infomation >> Những khoảnh khắc street style ấn tượng nhất 2016 - Duration: 2:52. 
For more infomation >> 2017 ANACS MS70 FDOI LE of (39) 4pc Gold Eagle Coin Set - Duration: 3:59. 
For more infomation >> How To Be Like Talia Castellano - Duration: 1:25. 
For more infomation >> Obati Kanker Payudara, Yana Zein Cuma Andalkan BPJS - Duration: 1:56. 
For more infomation >> How To Be Mature Towards Your Parents Middle School Girls - Duration: 2:58. 
For more infomation >> How To Be Like Shelby Hamilton Meowshelbs - Duration: 3:01. 
For more infomation >> 2016 5oz Silver Bullion Fort Moultrie Quarter - Duration: 2:15. 
Không có nhận xét nào:
Đăng nhận xét