The Redrock 4X4 Stubby Front Bumper with Stinger and Winch Mount is for those of you that have
a 2007 and up JK.
They are looking to add a Stubby Front Bumper to the right clearance for a 37-inch tire
and also to add a lot of additional off-road features.
This bumper is not only gonna add all those features, but is also going to drastically
change the look of your Jeep.
This is still going to be a very easy to install bumper.
Definitely a one out of three wrench installation, only about an hour or so to get this bolted
up.
But we'll talk more about that install in just a second.
Just like I said, the main reason for a Stubby Front Bumper is that additional tire clearance,
but if you're just looking for an aesthetic change, or the features that this bumper has,
this is also going to be a really good option for you.
Redrock 4X4 is known for making a high-quality product at a lower cost than some of the other
competition out there, so you're gonna be able to get a lot of features for a pretty
fair price.
As far as contraction, this is going to be 5/32 inch of steel, which is going to be strong,
will help to keep weight down a little bit from some of those 3/16 bumpers that are out
there.
The tube up here is going to be two-inch, tubing is going to be a .12 in the wall thickness,
so it's gonna be nice, strong stuff here.
Now, this is a Stinger Bumper, and the initial purpose for the Stinger part here was that
if you're doing some really hardcore wheeling, you're coming down off of a very steep obstacle
and the Jeep wants to come forward on you, the Stinger hits the ground and pushes you
to one side or the other, keeping you on the tires.
Or in the event of a rollover, the Stinger was designed to be tall enough to keep any
weight, and therefore damage off of the radiator and the radiator support.
This here is gonna be a little bit of a different Stinger.
This is more of an aesthetic Stinger.
This does have a gusset here so it is going to have some strength to it.
But in all reality, this is probably going to be something that a lot of you installed
because you like the look and not so much you need it for the function, and that's perfectly
okay as bumpers are also going to have some other features that I like.
It has a 12,000 pound Winch Plate over the end to it here, this is going to be your Fairly
Mount.You're also going to have two recovery points, and this is also going to come with
the D-Rings for those D-Ring Mounts.
Now, D-Rings aren't crazy expensive.
It's just really nice that they included them in the box for you so you don't have to make
yourself a purchase.
Everything comes right here for you.
These holes in the bottom here aren't necessarily for lights or anything like that, this is
more for aesthetics.
It'll help to keep the weight down a little bit as well, but these are aesthetics.
This is not designed to mount your factory fog lights in it.
Now, Redrock does have a Stubby Front Bumper with fog light mounts.
If you want that, we have that option as well, but these are going to be more of an aesthetic
thing than anything else.
So, this bumper is going to have a couple of holes up on the top here that you can mount
a couple of light pods if you choose to, but there aren't going to be any specific light
mount in tabs, or again, any spots for falling.
But overall, I do think this adds a good bit of function, a nice bit of style to your Jeep.
If you're looking for a Stubby Front Bumper, I think this is gonna be a good choice.
So to get this installed is a one out of three wrench installation, only about an hour or
so for the whole process.
The first step is removing your factory front bumper.
In order to do that, you'll remove your splash shield and your frame cover.
You'll also unplug the fog lights from the factory bumper.
Go ahead and unbolt it and then just give it a pull to remove it from the Jeep.
Once it's removed, you simply set your new bumper over the top of the frame horns.
Go ahead and bolt it down with all the included hardware.
And then if you are going to be installing a Winch, you can go ahead and do that.
Now, you can also flip-flop the steps and install the Winch before you put the bumper
on your Jeep.
That's personally the way I like to do it because it makes the Winch mounting hardware
a lot easier to get to.
Although, once you have the Winch mounted on to the bumper, this is a big, heavy thing
to be lifting and to place on the Jeep, so you'll probably wanna have an extra set of
hands.
This bumper will run you right around $400, and I think that's gonna be a pretty good
deal for what you're getting.
There are gonna be some Stubby Bumpers out there that are more expensive than this one
and also some that are gonna be less expensive.
I think that again, for the quality and for the features that you're getting, this is
a very fair price.
So if you're looking for a Stubby Front Bumper to install on your JK, I definitely recommend
taking a look at this option from Redrock 4X4, and you can find it right here at ExtremeTerrain.com.
For more infomation >> El origen pagano de la Navidad: Saturnalia - Duration: 9:14. 
For more infomation >> Входящий поток партнеров в MLM-бизнес || Платформа «ПРОРЫВ» || Формирование команды в сетевом - Duration: 4:09. 
For more infomation >> LMIS AG - #DevDay20siebzehn - Duration: 4:51. 
For more infomation >> Overwatch Moments #108 - Duration: 5:12. 
For more infomation >> Cómo evitar accidentes durante las fiestas navideñas - Duration: 2:07. 
For more infomation >> Javzye - Slam#3 - Duration: 1:22. 
For more infomation >> PAUL WATSON, le pirate écolo - Mouton calé #19 - Duration: 3:59. 
For more infomation >> 6000 ABUNƏ ÖZƏL! (SUAL-CAVAB) - Duration: 7:54. 
For more infomation >> MUNDO GALAXIA CHANNEL ►►RECUENTO 2017 #RemotoEnNuestrasManos - Duration: 6:37. 
Không có nhận xét nào:
Đăng nhận xét