Thứ Bảy, 23 tháng 12, 2017

Waching daily Dec 23 2017

Quick Wazifa For Love Marriage | Baat Manwane Ka Amal ! Kisi Ke Bhi Dil Me Mohabbat Dalne Ka Wazifa

For more infomation >> Quick Wazifa For Love Marriage | Baat Manwane Ka Amal ! Kisi Ke Bhi Dil Me Mohabbat Dalne Ka Wazifa - Duration: 3:37.

-------------------------------------------

BUDAPEST - Duration: 6:28.

Two cities

Buda and Pest that united

to serve as the beautiful capital of Hungary

Let's check out the castle of Buda

There it is

The gates right in front of me

You see the bridge over there

It is the first bridge between the two cities

and there is couple of legends about it

the first one is that..

One guys mother was living on the other side of the river

and she was dying of some illness

and the son couldn't see her

because the weather was so bad that you couldn't cross the river by boat

because of this tragedy

he decided to build a bridge

that no-one would experience the same

in the other hand

there is another legend

that someones lover was living on the other side

because the bridge was needed to crossover more quickly

I don't know believe whatever you want

but anyway maybe it's a good thing that there is a couple of bridges

Yes, so we just came from hotel

changed the outfit a little bit because will be wearing these until late

hopefully we will visit couple of cool pubs and taste some local food

I have seriously waited now 5 minutes for the perfect B-roll

but we will see

and now the police is bothering me

it is hectic in Budapest

but at the same time you have to wait for a stupid elevator video

but it has been fun in here

now it is going

There is a funny legend about the bridge

that I told you before

and the legend says that

the sculptor

you can see the lions somewhere in the background

this sculptor had used time to carefully study the anatomy of a lion

that if someone finds any mistakes

of the lions he made

he is ready to kill himself

and the story says that this one little kid

would have walked by with his father

looked at the lions

and asked the father..

where is the lions tongues

and after that..

the sculptor would have tragically jumped from the bridge

and died

but luckily this is just a legend

because if you climb and watch

you can see the tongue too

we just came to the parliament house

this is the worlds 3rd largest

parliament house

if you have ever wondered

from where Rubik's cube is originated

it has been actually created in Hungary

by a guy named Erno

check it out if you don't believe

now we are wondering in the Budapest christmas market

here is lots of good looking food

I would want to taste this one hangover food

that I saw a video on youtube

that looked really tasty

it has garlic, cream cheese, cheese

and the mostly a lot of grease

I don't know it would be nice to taste something like that

you can't eat it everyday

but during holiday why not

I recommend

to take if you ever are in Budapest

they have a lot of superstitions about statues in hungary

here is this police officer

that if you rub his belly

you will get good luck in love

and if you rub the mustache,

you will just get

Here is apparently the same thing as in Munich

couple of weekends ago

there was this one statue that was covered with photos

of this one iconic popstar

and the popstar is ofcourse

Micheal Jackson

And now to taste a little bit of hungarian Goulash soup

that is here in the pot

and some Tokaj wine

so yeah I am traveling with my parents

the only thing what was good about this room was

this is pretty up that you need to take a bus to get here

but the view is magical

I was looking that here is really cool pubs

that has been done in to abandoned houses

somehow I am intrigued about everything like that

broken that has turned into something cool

For more infomation >> BUDAPEST - Duration: 6:28.

-------------------------------------------

Gramophone Live Sessions - Auntie's Yellow Sofa - Duration: 17:56.

Auntie's Yellow Sofa

Thanks a lot for coming and for accepting Gramophone Studios' invitation

We really appreciate it

Ok, some questions about yourselves

Some general questions, maybe a bit unusual, to get to know you better

You're sitting on a sofa, which is not yellow

Sorry

We were quite annoyed about it

How did you feel together as a band during this session?

Good

Very Good

It's quite different

because it's live but you still need to keep in mind that you're recording at the same time

It was challenging

But it was fun, no?

Yes, definitely it was

If you were to be a crayon

a crayon in a box of crayons

What color would you be?

Choosing yellow would be a cliché

No, individually

But will we be together, in the same box?

Yes, you will be together in the same box

I'll be green

David would be flashing pink

Then, I will be...

Then you'll be black and I'll be blue

Yes, exactly

I think that I'll be purple, dark purple

I don't know why

If you were to be an animal

What animal would you be?

Individually? Yes Individually

Giraffe

So that during a concert I can see well

I'd choose to be a falcon

So that during a concert, I won't have a problem too

I think...

You'd be a Koala bear

Yes, a Koala bear

Because I'm a little slow

Not mentally slow, just I do things slowly

Well, I'd be a Kangaroo

Whilst playing live I'm always jumping around

A favourite 90s song

This is a difficult one...

Nirvana

There are too many to choose from

Under the Bridge by Red Hot Chili Peppers

I'm not sure if that came out during the 90s

I'd choose U2

Ah, Yes

This was a tricky question, I'd rather not say

It's difficult, to choose just one song

If you were to choose a band to play in your living room

Which band would it be?

Bombay Bicycle Club

Ah yes, that's great

Maccabees

Or something between the two

Because they can't be loud because of the neighbours

That's something to worry about later on then

If I were to choose between Maccabees and Bombay Bicycle Club

Bombay are less loud, so I'd choose them

Maccabees would get us into trouble

(All Agree)

Which one of you arrives the latest for rehearsals?

They're all from Mosta and I'm from Qrendi

so I've a good excuse to take long

So, Auntie's Yellow Sofa, tell us

about your future plans

or what you plan on doing in the future

and where people can listen to your music or contact you

Right now, we are recording

another two songs

both are originals

One's called 'Hola' and the other is called 'Lights'

We're mainly focusing on recording those songs right now

Well, people can find us...

On our Facebook Page

We're also on Spotify, Instagram and iTunes

Basically on most of the social media platforms available

So, Auntie's Yellow Sofa

Since Christmas will soon be here

We would like you to play us a Christmas Song

We'll give it a shot

What instruments shall we use?

Go for it!

We'll do it then

No Pressure

For more infomation >> Gramophone Live Sessions - Auntie's Yellow Sofa - Duration: 17:56.

-------------------------------------------

Quem São Seus Heróis? - Duration: 10:07.

For more infomation >> Quem São Seus Heróis? - Duration: 10:07.

-------------------------------------------

New Honda Pridor 100 2018 Price in Pakistan Specs Rs. 86,500 Video ebike.pk - Duration: 2:21.

Price Rs. 86,500

Price Rs. 86,500

For more infomation >> New Honda Pridor 100 2018 Price in Pakistan Specs Rs. 86,500 Video ebike.pk - Duration: 2:21.

-------------------------------------------

The BEST Strategy To Invest In Cryptocurrency! - Duration: 1:38:17.

Best Crypto Strategy!

For more infomation >> The BEST Strategy To Invest In Cryptocurrency! - Duration: 1:38:17.

-------------------------------------------

Review: Cheap CNC Machine from Banggood.com - Duration: 10:24.

Dear friends welcome to another video!

I am really excited because today we are going to take a first look at this CNC machine!

It is a low-cost CNC machine which can achieve some amazing results!

Without any further delay let's get started!

Hello, guys, I am Nick and welcome to educ8s.tv a channel that is all about DIY electronics

projects.

In this channel, I share everything about the projects I build to help you develop similar

projects or inspire you to start making things because it is easy, fun and creative.

Subscribe to the channel now if you do not want to miss any future video.

In this video, I am going to share with you my experience with this new CNC machine.

I own this machine for about two months now and now and I am ready to share my opinion

about it with you.

I am an absolute beginner in CNC milling and machining.

Before receiving this machine, I had never used a machine like this so in this video

I will describe my experience as a first time user of a cheap CNC machine.

I discovered this small and low-cost CNC machine while browsing on Banggood's website.

I always wanted to add a CNC machine to my workshop and before spending a large amount

of money for a big machine I thought it would be a good idea to try a cheap one first, learn

the basics and then, moving on to a more advanced one.

That's why I decided to try it.

The machine costs around 300$ at the time I am recording this video.

Banggood was kind enough was kind enough to send me this CNC machine to try it and share

my opinion about it with you!It is one of the cheapest machines out there, and from

the images on the product page, it seems it can produce amazing results!

I almost repeated those results with the provides woods pieces and files, but unfortunately,

I accidentally destroyed the end mills because I was a complete beginner with CNC machines.

The machine comes as a kit in a big box which weights over 10Kgs!

All the parts inside were packaged very well, and it arrived intact.

There was only one important thing missing, an assembly manual!

Unfortunately, the kit comes with no printed instruction or any manual.

So, after searching online I discovered some images from Eleksmaker the creators of the

machine that describe the assembly of the machine.

It took me around 10 hours to build the machine, mostly due to the lack of a proper assembly

manual.

I also watched this video which provided a lot of information.

You are in better luck though, the creators of the machine created a new webpage with

detailed instructions about the assembly procedure a few weeks ago.

After that, I was ready to test the machine!

But where is the CD?

There was no CD inside the package.

Once again I searched the internet for software.

It took me a couple of days to understand how this machine works and what kind of software

I need.

I will try to explain the workflow from start to finish.

Let say we want to create a simple wooden Christmas ornament like this one.

First of all, we have to design it in a design software.

We are going to use Easel a free online tool today.

This tool will generate a g-code file.

Next, we are going to use another software to send this file to the machine.

We are going to use Universal-Gcode Sender today.

The machine is running its own piece of software to communicate with the computer to receive

the g-code file, control the stepper motors and the spindle.

The software the CNC machine is running is a simple Arduino sketch because the brains

of the machine are our familiar Arduino Nano!

Now that we know the workflow let's create our first wooden part.

First of all, we need to load the latest firmware to the CNC machine.

All we have to do is to upload the firmware the manufacturer of the machine offers.

In order to upload the firmware to the machine, you need to connect it to your computer.

After that, we power on the machine and install the CH340 USB to serial driver if it is not

already installed on your machine.

We open the Xloader program, and we load the Eleks-v0.9.hex file.

The machine is now configured.

You find a link to all the files in the description below.

Now let's design our part.

I tried a lot of design software, but I think the easiest way to start is to use Easel,

an online tool by Inventables, the creators of the famous X-Carve CNC machine.

This tool is free, you just have to sign up, and you are ready to use the software.

We create a new project, and we set up our machine.

The work area is around 150mm x 60mm.

We set the spindle control to automatic and the RPM to 5.000.

Now we need to import the dimensions of the piece of wood we are going to mill.

Be very precise with your measurements by using a digital caliper.

Now we can design the part.

I chose a tree icon from the examples, and I resize it to fit to the size of the wood

piece I have.

I choose the cut tab; the cut depth is going to be 5.3mm since 5.3mm is the thickness of

the wood piece.

I won't use any tabs this time so I disable this feature.

The next step is to select the end mill we are going to use.

I am going to use a 2mm end mill from this kit I bought from banggood.

You can find a link to it below.

This CNC machine comes with 2 end mills that are suitable for engraving but not for cutting

wood.

Next, we press the "Cut Settings" and we go to Custom.

I change the "Depth per pass" field to 0.2mm.

We are almost ready.

We go to Machine -> Advanced and we set the "Safety Height" at 0.3mm.

We press the Generate g-code button, and then the export-gcode button.

That's it!

Our g-code file is ready.

Now all we have to is to send this file to the CNC machine using the Universal G-Code

sender software.

We have to follow the instructions I found online in order to configure the software

for this CNC machine.

After trying a test project with the machine, I noticed that the Z-axis movement was reversed!

After searching online, I discovered the solution.

We have to reverse the Z-axis movement by software by going to Firmware Settings and

setting the parameter #3=4.

Now we open the gcode file we created before, and we press Visualize.

We can see our design and the path the end mill is going to follow.

We are only one step away.

I place the wood piece on the CNC table, and I attach it using double-sided tape.

Beneath it, I have attached another thin piece of wood to protect the end mill in case it

cuts through our 5mm wood piece due to some error.

Then we manually move the spindle and place the end mill at the bottom left corner of

our piece of wood.

The end mill must be very close to the wood, almost touching it.

Now, we have to press the reset zero button at the Universal G-Code sender software.

This is very important; we have to press the button each time we start a new project.

Finally, we are ready to press the Send button.

The machine starts working and the spindle is moving.

We can watch the path that spindle is going to follow in the Visualize window as well.

The G-code file is sent to the machine line after line, so the CNC machine must be connected

to the computer at all times.

I really like watching the CNC machine doing its thing.

It is really very cool to watch a machine cutting wood by itself.

While the CNC does its job, let me tell you about a new Android game I developed.

It is called Fact or Fiction, and it is a free Quiz Game.

It contains thousands of facts, and it supports two languages, for now, English and Greek.

If you like quiz games, I am sure you are going to enjoy this one as well.

You can download it for free from the Google Play Store.

I will provide a link to it in the description of the video below.

A few minutes later the part is ready!

We remove it from the CNC table like this, and our part is almost ready!

It looks so cool!

All it needs is a bit of sanding!

As you can see, creating complex wooden parts is not possible with no woodworking skills

at all!

We can also use this machine to create parts and objects out of Plexiglas as well or mill

our own PCBs.

I haven't tried any of this yet; I just created some wooden parts so far.

As a final thought, I really like this machine, and I think I am going to use it a lot in

the near future.

My goal is to buy a more advanced CNC machine in the future, but until then, I will experiment

with this small one, to gain experience and do some cool projects with it.

The machine is great to learn the basics of a CNC machine, but the learning curve is steep.

The assembly of the machine was frustrating because of the lack of a proper assembly manual.

Luckily, there is a better one available now so you will have a better experience than

I did.

The next disadvantage is the lack of proper software.

I had to find out by myself what software to use with the machine and how to operate

it.

I wish there was a video like this one published on Youtube when I learned the basics.

It would have saved me many days of trial and error.

One last disadvantage is the screws provided with the machine.

Especially the screws on the spindle must be very strong and sturdy to withstand the

forces and the vibrations.

Replace the provided screws with better M3 screws.

I destroyed 5 end mills and many wood pieces when using the provided screws.

You are going to find everything you need, from screws and endmills to software and instructions

in the description below.

If you overcome these problems, the results are really rewarding.

You can achieve amazing results with this machine if you learn how to use it.

I am looking forward to trying new things with the machine now that I know how to operate

it.

I will try to mill PCBs, to cut Plexiglass parts, and engrave wooden parts.

I managed to engrave this before my end mill broke.

The detail is stunning!

I can't wait to try it again with my new end mills.

I think a CNC machine is a great tool for every maker.

It opens up a whole world of new projects.

I would love to hear your opinion about this CNC machine and CNC machines in general.

Do you find it useful and are you going to invest in one in the future.

Please post your comments in the comments section below!

If this is your first time here, I would love to have you subscribed.

In this channel, I post videos about DIY projects twice a month.

I love making things, and I believe that anyone can make things, anyone can become a maker.

That's why I created this channel, to share my knowledge with the community and learn

from the community.

I hope you will join us.

I will see you in the next video!

[ Translating these subtitles? Add your name here! ]

For more infomation >> Review: Cheap CNC Machine from Banggood.com - Duration: 10:24.

-------------------------------------------

How Your WiFi Will be Hacked? - Duration: 2:23.

hello friends in this video I am going to show you all how your Wi-Fi will be

hacked or how to hack Wi-Fi this video is only for knowledge purpose don't

misuse this technique and it's completely illegal so for this we need

to download two applications I have given a direct links in the description

below do check now go to settings and go to about phone and select status and

long press on the serial number we need to copy the serial number here after

this close this window and open ES File Explorer select internal storage and

click here on three dots selecting new and now select file here give filename

as a serial number simply paste the serial number here which we already

copied and press ok yes now open V PS VP a tester application click on agree then

icon here synchronize button it will show us all active nearby Wi-Fi networks

select the Wi-Fi you want to connect with then click OK now here select an

option called connect automatic pin within seconds of time your phone will

be connected with selected Wi-Fi network yes here no need to root your device but

if your phone is rooted then you can see the password if not you can only connect

so this is how people will hack you a Wi-Fi network be secure a Wi-Fi network

I'll show you in my next video how to protect to your Wi-Fi network so hope

this video is useful to you all who subscribe this channel for more updates

like this click on Bell icon to get notified about my videos thanks for

watching we'll see you in my next video

For more infomation >> How Your WiFi Will be Hacked? - Duration: 2:23.

-------------------------------------------

Healthy No-Bake Energy Energy Ball recipes in Tamil - Duration: 2:54.

Healthy No-Bake Energy Energy Ball recipes in Tamil

For more infomation >> Healthy No-Bake Energy Energy Ball recipes in Tamil - Duration: 2:54.

-------------------------------------------

LITTLE BITCHES Official Trailer (2018) Jennette McCurdy Comedy Movie HD BY BEAUTY SALON - Duration: 1:52.

SUBSCRIBE FOR MORE UPDATES

SUBSCRIBE FOR MORE UPDATES

For more infomation >> LITTLE BITCHES Official Trailer (2018) Jennette McCurdy Comedy Movie HD BY BEAUTY SALON - Duration: 1:52.

-------------------------------------------

Modena the Art of Food (EN-IT Sub) - Duration: 3:06.

Be inspired by somewhere unique and intense,

a junction where centuries-old traditions and sense of initiative,

knowledge and entrepreneurship all come together.

Be surprised by the care, enthusiasm,

and knowhow of a crossroads of places and people

privy to the secret of living well,

who hand it on to present and future generations.

Be tempted by products and ingredients

that become extraordinary food and dishes

thanks to long-standing, jealously guarded experience.

Be amazed by the flavours and aromas of traditional balsamic vinegar,

by the vineyards that give birth to Lambrusco.

Savour the sweetness of cherries from the Valli del Panaro.

Discover the colourful market of Storico Mercato Albinelli,

all the ham, cheese and vinegar factories, farms, and consortia, the producers,

large and small, who make this territory unique.

Be seduced by all this,

our wonderful hills,

our flowing rivers,

the mystery of our porticos,

our hand-made tortellini,

and real "slow food" cooked by housewives or rezdore,

the kindness and hospitality of the locals.

Something extraordinary happens here.

In Modena.

Innovation, tradition, culture

and a passion for food in the heart of the Via Emilia.

For more infomation >> Modena the Art of Food (EN-IT Sub) - Duration: 3:06.

-------------------------------------------

Eye Makeup Tutorials Compilation 2017 ! DIY Makeup Life Hacks for Girls - Duration: 10:12.

Thank you for watching!

Like, Share & Subcribe this Channel to support for us! <3

For more infomation >> Eye Makeup Tutorials Compilation 2017 ! DIY Makeup Life Hacks for Girls - Duration: 10:12.

-------------------------------------------

| QA Episode #1: Find the Missing Numbers in Excel in Hindi | by Let's Learn Excel - Duration: 5:50.

Welcome to my Channel

Download the file from the link in the description

Please like,comment,share and subscribe

Download the file from the link in the description

Please like,comment,share and subscribe

Download the file from the link in the description

Please like,comment,share and subscribe

Thanks for watching

For more infomation >> | QA Episode #1: Find the Missing Numbers in Excel in Hindi | by Let's Learn Excel - Duration: 5:50.

-------------------------------------------

Fresh Pretty Cure ! 2009-2010 41 (Pub) (@PrettyTrad) - Duration: 0:31.

For more infomation >> Fresh Pretty Cure ! 2009-2010 41 (Pub) (@PrettyTrad) - Duration: 0:31.

-------------------------------------------

Travelog in Europe: Week 3-4 in Sweden 瑞典哥德堡 [ENG SUB] - Duration: 3:21.

Hello everyone! :-)

For week 3-4, we did nothing special

Just our favourite activities: grocery shopping and cooking

See the mushroom? they are just 5kr each!!

Sorry no one can see

This weekend, we went to an island with hiking trails

My friends wanted to "keep a low profile" :P

So please be reminded that

some shots may be a bit weird :/

wait wait wait.. where's the hiking trail?

Are we just spending our day with a cat?

Since we could get very limited information on the internet

and we didn't even know how to get it started

but all roads lead to Rome

that's how we started our journey (with no map)

A while later, we lost our way

but we bumped into a resident who was trimming grass

and we asked him for advice

He pointed at the eleven o'clock position

saying that's the hill we want to climb

he also added that there wasn't a lot to see on that island

and it's not a very good choice of destination

BUT we had gone so far and we're not going back

We kept going. We arrived a pier and took some pictures

AND SUDDENLY we found a hand drawn map

without a doubt we followed it

We walk to the left ... and we walk to the right...

and we walk in the rain :(

The weather in Gothenburg is just as unpredictable as your partner's behaviour...

at least one side of my pants was dry -_-

The weather was so nice in the 4th week

we had our lunch outside :)

homemade tacos :)

That's all for week 3-4

Thanks for watching! We will see each other very soon. Bye~

For more infomation >> Travelog in Europe: Week 3-4 in Sweden 瑞典哥德堡 [ENG SUB] - Duration: 3:21.

-------------------------------------------

☑️ MİNECRAFT'TA SLİME DÜNYASI PORTALI - Duration: 12:09.

For more infomation >> ☑️ MİNECRAFT'TA SLİME DÜNYASI PORTALI - Duration: 12:09.

-------------------------------------------

Angel Card Reading DECEMBER 24-30 with Elizabeth Harper - Duration: 10:31.

Welcome everyone to this week's angel messages my name is Elizabeth Harper and

what I'd like you to do first is place one or both of your hands over your

heart just like angel wings. Invite your angels to guide you to message one two

or three, card one two or three a message that comes from their heart to yours.

What you can also do is invite your angels to guide you to a particular

place in the video move your cursor along until intuitively feel it's time

to stop right there is an extra special message for you from your angels all

right? So we've got my big deck of cards right here. I'm just going to shuffle

them just a little bit. I've already shuffled I like to move that energy

around as well. See you can Intuit where we're gonna pick card one two or three

from in this big deck. So it feels like I actually feel like I can see it yeah

it's a green card that is Archangel Gabriel that's number one all right. So I

feel like the same thing on the bottom almost the same place but it's a yellow

card that's the Archangels card that's message two. Oh and there's one just

sticking out there but oh it's there's three cards no it's not. That is the

daily meditation cards as well. Daily message cards all right so number one

let's see what you've got. You've got Writers Group how interesting.

Look at that card now it says 'Create or join a writers group to gain inspiration

friendship and support." Now you might be thinking to yourself 'well hang on a minute.

I'm not a writer or I don't have anything to write,' but I feel that this

is about creativity. That it's a about sharing with people that that

essence of communication which is the writing it's the essence of inspiration

it's the essence of creativity yes the essence of healing I'm being told as

well because it's coming through that ears and throat and heart vibration all

together. So there's a sense of it's not necessarily about writing it could also

be about just connecting to people just connecting in a tribe connecting with

those people that have the same mindset as you the same energy as you the same

intention as you etc. The Writers' group can also be because it's the end of the

year I back from contact this because I can hear what's coming through at the

same time. It it can also be about writing your desires for next year, your

wishes for next year, your plans, your goals etc. and getting together with a

group of people can really help you solidify those goals. It can help you to

get ideas from other people as well and there's a power in groups that you don't

necessarily have by yourself. So there's also a sense of commitment as well as

you join that group. So as I'm looking at this I'm seeing this beautiful this

lovely orange top you see that? And that golden vibration there it's almost

like an orange flame isn't it? That's coming up that's that sacral center and

that sacral Center is about creativity and inspiration and I feel there as well

you know there are it's a building that's there's a sense of building

blocks coming up here. So whatever this is about it may be that you start out

having an idea and you want to join a group but that group is going to expand

into something else it's building a solid foundation for you for your

creativity for your intuition for your for your inspiration and growth comes

from that as well because it's fertile it's that sacral Center energy that's

coming in. Oh I love that turned out to be something pretty good didn't it?

All right so our second card is, "You Know What to Do" don't you just hate it when

somebody says that to you? You know you don't need to be told. You know what to

do this is Archangel Uriel, "Trust your inner knowledge and act upon it without

delay." Now Uriel also has this kind of orange color golden energy and is

holding a light. When you have this light there is this vibration that is about

knowledge, its about understanding, it's about getting information. You you

throw light on a subject so that you can expand on it so you can understand it. So

with this I feel that your angels are just saying you know if you're having

problems at the moment, if you're trying to figure something out and thinking

about this for myself as well you know we teach what we most need to learn

right? Every message is also for me. So when I look at this and sense this and feel

into it it's saying that the question that you're asking at this moment this

big question that you may have right now you know the answer to it. You already

know the answer to it. Just feel into it just get a sense of what it feels like

Feel it in your body. Feel it in your heart. Feel it in your

soul. What does it feel like? And then go with that feeling. You can call on

Archangel Uriel to support you and help you with that energy and then with the

light it's opening yourself up to the light and maybe meditating on that

question that you have the big question that you have at this moment. Meditate on

it, bring a light into it and just allow that answer the answer to come in. I was

thinking about this this morning interestingly that you know when you

meditate you get to this place of Nirvana when you get to this amazing

place where there's all knowledge you no longer have any questions because you

have all the answers right there and it's like your question doesn't exist

anymore. So you have access to all knowledge it's just a

case of opening yourself up to receive. Alright our

third card is, "Release and Surrender" Oh my so this is violet and yellow these

are opposite each other on the color wheel so the violet is that Crown Chakra

the yellow is the solar plexus. Solar plexus can hold the energy of fear it

can hold this energy of power as well so with the cleansing what happens is you

release that fear. You release the pain. You release that maybe need for

something that you don't need anymore surrender to the energy and you become

much more powerful in that as well. So it says, "We shower you with blessings of our

radiant love. Open your arms and release the challenges that you've held tightly

gripped within your hands. Open your hands, arms and heart to our love and

assistance." That's so beautiful that's such a beautiful card as well and it

almost makes me think of the Statue of Liberty you know? So there's a sense of

freedom and liberation that comes from this I noticed that she I don't know if you

can see that her hands have rays of light coming out as well so theres healing

that comes from this. You know when we cleanse, when we release, when we let go

then all the cells of your being can come into this beautiful place of light.

I love that and with that violet and yellow energy again there is a sense of

the violet is change. Violet is transformation and that yellow is the

cleansing vibration but the two energies coming together also say that maybe it's

time for you to come out that's that yellow energy. The violet is you know a

little bit hidden in the violet and then the yellow is saying

come on out to play. So the violet is moving up and that yellow is coming

right out. So you are going to be seen it's time for you to be seen it's time

for you to let go surrender and shine your light and come into your power. Okay

that's it for this week's angel messages I hope you enjoyed them

now do make sure that you check out my VIP waitlist for my new membership site

it's coming up very soon and if you are on the waitlist you will be the first to

know but you will also be getting some special deals by being on that waitlist.

I also have of course of course an Archangel Gabriel prayer to share with you

Archangel Gabriel is that beautiful vibration of creativity and inspiration

perfect for this time of year. If you enjoyed this video please give it a

thumbs up. Let me know in the comments below if the messages resonated for you

and of course if they did please share this video with your friends I'm sure

they would love to have an angel message. I will see you next week

Merry Christmas to you, Happy Holidays and Angel Blessings. Bye!

Không có nhận xét nào:

Đăng nhận xét