Snowdrops, The best love songs, Sergei Suhachёv
-------------------------------------------
Alu Chicken Curry || Palle Ruchulu || MusicHouse27 - Duration: 7:32.Preparation Of Aloo Chicken Curry.
Peel required number of onions aside.
Dice the peeled onions
so that we can grind them into a fine paste
Take required number of tomatoes.
cut them into pieces and keep aside
Grind the onion and tomatoes into fine paste using a grinder.
Now clean the potatoes
If u like them with skin you can use directly or you can peel the potatoes also.
Cut the potatoes into small pieces.
Cut the green chilies vertically.
now clean the chicken pieces throughly
cooking on a open stove is much healthier and tastier than cooking on a conventional stove.
take a deep bottom pan and sprinkle some oil in it.
add the green chilies and saute
after sauteing the chilies.
add the grinded onion paste and saute
add ginger garlic paste
then add the tomato puree
after saute add some red chili powder
add some chicken masala and mix well
sprinkle some salt to your taste
add some oil if you like to
cook it on a medium flame
add the chopped potatoes
after the potatoes are cooked add the chicken
mix well and let it cook for 5mins
add required water after 5 mins
Bring everything to a boil
Take it off the stove after twenty minutes.
-------------------------------------------
Learn Colors and Numbers with Five Little Babies Dog Jumping On The Bed 🍏 Nursery Rhymes Kid Songs - Duration: 3:06.Please SUBSCRIBE to #Sutichannel for support and that way you can find us faster and be the first to see all our future videos!
-------------------------------------------
Se os gatos são carnívoros verdadeiros, por que comem proteína vegetal? - Duration: 30:47. For more infomation >> Se os gatos são carnívoros verdadeiros, por que comem proteína vegetal? - Duration: 30:47.-------------------------------------------
Aynur Kılıç - Gözlerimi Kapatsam - Duration: 3:05. For more infomation >> Aynur Kılıç - Gözlerimi Kapatsam - Duration: 3:05.-------------------------------------------
GVC Minute Challenge: Jody - Duration: 1:47.[Ryan] I know you're not-
[Jody] Yeah, it's...
[Ryan] particularly fond of the camera, but are you excited to do the GVC...
[Jody] Sure.
[Ryan] (GVC) Minute challenge?
[Jody] Yeah.
[Ryan] Okay.
[Ryan] Did you do any special preparing for the GVC Minute Challenge?
[Jody] Not really. I watched a couple of the videos, but...
I don't think I'm gonna win.
[Ryan] No?
[Jody] No.
[Ryan] No? Why not?
[Jody] I just don't want to be last.
[Ryan] Oh, okay. So that's a good-that's a good goal.
[Jody] Yeah.
[Ryan] Right? Okay. Well, are you ready?
[Jody] Sure.
3...2...1...
Dessert of choice?
Um...cake.
Favorite school subject?
Math.
Soda of choice?
Cherry Coke.
Favorite superhero
Wonder Woman
Dressed up or casual?
Casual
Last book you read?
Um, Hunger Games
Favorite sport?
Softball.
Biggest fear?
Pass.
What time do you get up?
5:30
Green beans or broccoli?
Green beans.
What makes you smile?
My kids.
One thing on your bucket list?
To go to Ireland.
What would be your superhero name?
Pass.
What time do you go to bed?
11:00
What topping on your pizza?
Vegetables.
Least favorite color?
Black.
Last person who texted you?
My boyfriend.
Favorite season?
Spring.
How many keys are on your key chain?
Two.
What kind of phone do you have?
iPhone.
Favorite ice cream flavor?
Vanilla.
Juice for water?
Water.
How many years have you worked here?
Three.
What was the last item you bought-
I nominate Theresa Gavin.
-------------------------------------------
Falcon BMS - ICP Tutorial #10 - Boton LIST - Parte 2/2 - Duration: 19:45.Hi and welcome to Revientor Reborn this is Falcon BMS and the Tutorial series, let´s go for it
continuing with the list mode of the previous video, let´s see the nº6 (INS)
the ins the info you you have, is the status of the alignment of the system, the first line is the value of alignement
you know when the ins lecture in the HUD is flashing is while is not ready and steady is ready. and the same here, now we have the minimal alignment in the system, the normal is 8, not 4.
you can also manage the waypoint here, and the latitude and longitude of own current position
you can set the scratchpad in those fields, and the altitude and true heading, you can type in there but in BMS those data is not updated, is limited by code, is not implemented
this in the real plane you will can change those values to indicate the current location of the plane when you perform a ramp start
the G/S is own ground speed, you can not change that, and thet is good when we taxi the plane
the next menu, EWS (7), electronic warfare system
here you can see this first screen you can change the values, the bingo of chaff and flares arrive that number, just type in there
the same with flare and O1 , O2 is not present in this plane, we can also activate the bingo signal, the consentiment required, when the system is in auto mode or semi, and the feedback you are droping contramesures
in this page you can select the waypoints also
using SEQ, you enter in the mode to edit the countermeasure programs, now I am editing the program nº the chaff area, bust quantity, bust interval, sequency interval, and sequence quantity
of course will be a tutorial of this
and using seq again will be the flares area
and now you can not control the waypoint, you select the program to edit
there is no more about those menu
the other two screens the ones to config the programs you need the system in stby mode to change the data there
normally you have this configured with the DTC
then mode (8) is another way to access to the master mode NAV AA or AG
now is AA, using seq I select AG but I have to activate it using the 0 , and again with the 0 return to nav mode
i can select one using seq to jump to the other one but until I hit 0 the mode is not selected and remain the other
and you can manage the current waypoint selected
the VRP (9), is about the pop-up strike, is the same as the other video, to add a mark to follow while performing the strike
to the waypoint that I select there, i will put some range, heading, altitude...
and the units can be selected as desired
ready
let´s continue with the next list page using the 0, here there is no too much things implemented, let´s start with the nº1 correction
this is correction HUD, we can also manage the waypoint, with seq there is no other menu, but here in theory is to set properly the hud image, I am not sure in which way... but looks like that... no much info out there
the next one is magV (2)is the magnetic variation, this is automatic in BMS, may be some day is manual, but you know the compass need to be fixed from time to time, here is that value
the OFP (3) menas, operational flight program, you can do nothing here, this is only inf of the version of the programs installed in each system
the nº4 is the INS memory, there is no info in there, looks you can type something....I can not tell you more, sorry
the next is the laser (5), this is implemented, finally, you can change the waypoint, and edith the tgp coude and lst code, the mode of the ag laser and the auto fire time
the TGP code is the laser code that the TGP will look for, and the LTS is the laser code that own TGP will fire
ag training using the 0 you set it to combat, mode, some flashing time and then is working with bombs, for that the combat mode, the training is a weaker laser only for ranging not able to guide munitions
in the AAis always training because there are no weapons air to aite guided with laser
and that 8 sec is when the auto laser is fired, when 8 secs for the impact the laser will auto fire
let´s see the next mode, GPS (6) you have here the info of the GPS the current BMS time, and the current day in your PC
ground speed and mheading, I do not know what is that M.... master heading??? no info there, you also can use the first line with the 0 in the rel plane looks like, I suppose is to change that data manually
the next menu is the Delta Bombs Range (DRNG - 7)
it something about bombs.. I did not found anything on documents, some axes there... we could imagine a ton of things but nothing is certain
now the bullseye menu, somethin implemented, now is deactivated, you have to use the 0 to activate it
in other tutorials you will learn more about bullseye, but now you get the info on the hud and the mfds where are you in bullseyed and your radar cursors
in some versions the AG have not bullseye in other yes it have...
with the doble you can change the bullseye waypoint from 1 to 25 only
be carefull with this because the awacs always will speak using the 25 bullseye
this is useful when humans vs humans with human awacs to set other non standard bullseye
looks when something is activated in the list menu is also in green selected
the number 9 is not implemented but is kind of the same from those pop up menus, this is only eye of candy you can do not do anything
no info of this one on internet but is the same menu as you can compare
let´s see the data link using the enter in the first list menu
in this menu, you can see the management of the waypoint, you can change to who you are emitting, of AG datalink, for the whole channel 10 (11,12,13,14), of course you can choose only one of then typing there
you can not edit the own value, it´s your frequency, fill all/none, with all you fill all the waypoints from 71 until 80 and then overwrite them , in none you only fill the same one
in com in the real plane the pilot can change which radio use what data link channel AG/AA info, in AG you will speak only with your package, you can change for uhf as the briefing say
in the real life can change between 16kb, 32kb, 8kb, 16baud or something like that ,is kind of the band, the wide for data traffic , and the other value I donñt know what it is
with seq you can manage the datalink that you want to see from your package, in this flight we are only 2 planes, but you can fill all those values with other planes from the package
the datalink is in the order of the BMS flight creation
the same with the radios, the must be one for each data AA/AG the same radio can not use both data info
the last is the nº of how many dl we have loaded
look if I put a new value the last will be 3
the HMCS is the helmet mounted cueing system, inside that page you can manage the places where you want to have the helmet visor on, when you look through the hud, the cockpit...
when they are activated you will not get helmet view
the declutter is more or lees info on the helmet
with seq are some types of alignment, I suppose this is use when you ramp start the plan to align the system in some way
now with the F16I in the second List menu you can see now two more menus, you can see the SPICE and the JDAM menues
the spice menu let you set the target the angle to hit the target final speed... the type to recon the target....
let´s see the other one, the JDAM, because there is no selected any target on the system we can not use this menu, but is for select the target
that was the tutorial I hope you liked and subscribe for more comments below and be happy bye bye
-------------------------------------------
Type of Conveying Systems We Supply - Tubular Chain Drag Conveyors - Duration: 1:36.Music
What type of systems has Luxme supplied?
The types of systems we supply include bulk bag unloading, which is a popular
system that is used for tubular chain conveying, truck unloading, silo filling,
and takeoff systems, receiving and cleaning conveying systems, where product
is received, either directly from the truck, silo, bags, bulk bags, and brought
into storage, or directly to cleaners and then from the cleaner brought into
storage for later processing. We also provide systems that will take material
from cookers into dryers, from dryers into packaging machines, as well as
provide systems that do some mixing of ingredients, where we may fill silos with
different ingredients, take off those ingredients at different proportions
that are layered into the conveyor; provide inline mixing with our Luxmix®
mixer, in order to deliver a homogeneous product that will be later, either
packaged or process, whether it be cooking or brewing.
Music
-------------------------------------------
Noodle Green Lentil Soup-Dish Recipe - Duration: 1:35.Half tea glass olive oil
1 dessert spoon butter
1 onion
Blight it
1 dessert spoon pepper gravy-1 table spoon of gravy
1 glass of boiled green lentil
Blight it
1 litre hot water
After boiled 1 bowl vermicelli
1 dessert spoon chili pepper-1 dessert spoon salt
Until vermicelli gets soft boil it. If you like our video dont forget to subscribe
SHARE-LIKE-SUBSCRIBE
-------------------------------------------
Denzel Washington Movies List - Duration: 2:08.Denzel Washington Movies List
Không có nhận xét nào:
Đăng nhận xét