Hello!
My name is Askar and it is "IT Verdict" channel
I'm a little bit sick so do not pay attention to the voice
and yet - be sure to watch the next video on this channel,
it will be very important for me.
So, let's begin.
Today we have plans to supplement the playlist
with reviews on computer mices with another version
of the mouse that came to me along with the Zerodate X400
from the last review.
This is the X200 model from the same company and let's see
if it can avoid all the disadvantages that the X400 had?
if it can avoid all the disadvantages that the X400 had?
Well, let's start as usual with the appearance.
The first thing I want to say about is that the mouse looks quite sipatic,
black soft plastic, good assembly, cable in braid.
The only thing that glossy red paint looks in my opinion
The only thing that glossy red paint looks in my opinion
is too cheap, but it's not so important.
The number of buttons is standard, the DPI profile switch button,
the main mouse buttons and the wheel, the forward and backward buttons
in the browser and in addition to this, there is another button,
which at this location is usually configured as sniper button.
which at this location is usually configured as sniper button.
In general, through the software that comes in the kit -
you can reconfigure essentially any of the buttons, but more on that later.
The shape of the mouse is convenient for the hand,
but there is one "but", about which later.
Pleases a rubberized pad under his thumb.
However, the area under the small finger of the same site is not enough.
The building part of the mouse is replaceable.
In the kit comes another panel, which is very easy to change.
In the kit comes another panel, which is very easy to change.
One for a slightly higher position of the palm
and the other respectively for a slightly lower.
Holds such a socket on the magnet and just does not play and flies.
Holds such a socket on the magnet and just does not play and flies.
By the way, the red edging near the wheel and under the DPI
switching button is naturally not metal, as it turned out with
the previous mouse
However, unlike the previous version, the same wheel is perfectly fixed.
However, unlike the previous version, the same wheel is perfectly fixed.
Now what has become a surprise for me.
Do you see these decorative inserts under the rear platform
on the left and right side?
So, when I started to examine the mouse in more detail -
it turned out that this is not for decor - these are the same weights.
it turned out that this is not for decor - these are the same weights.
Moreover, to remove them you will need a screwdriver to unscrew the special clamp,
located under the rear panel.
Wieghts are small, but this time it scares me not so much their
weight and how many machinations need to be done to get them -
this decision is really strange.
Especially strange is the mouse, when not all the weights are in place -
well, okay.
Summing up, I would like to note the combination of a good build
and a pleasant appearance with a few questionable decisions,
which I voiced before.
And now as to that very "but". Personally, my little finger lies
on the edge of the right mouse button, and this place
has a very unpleasant angle, and I do not know
if a person with a bigger palm, for example,
will face this problem, but this angle is very much
against me and rubbing it.
Not a very good design decision in any case.
Not a very good design decision in any case.
Now as for the filling.
2) The sensor here is worth as much as I understood the Avago A3050
and if you believe the information about it - then this is a fairly simple
sensor that is used in many budget solutions.
sensor that is used in many budget solutions.
Therefore, the maximum value of DPI-4000
Switches here are also worth the same Huano as on the Zerodate X400, however,
What is it??
What is it??
This mouse does not cease to amaze me, inside it is the main
and main weighting agent of this mouse,
which weighs about the same as all other external weights.
which weighs about the same as all other external weights.
That's what I understand - weight customization!
And if seriously, if you suddenly want to create a light mouse,
then taking off the small weights and taking out this bar from the inside,
then the mouse will practically not be felt in the hand.
then the mouse will practically not be felt in the hand.
I do not know who will need this, of course, but here it is.
I do not know who will need this, of course, but here it is.
3) As for the software, it's about the same software as the Zerodate 400
2 Tabs: Basic settings and additional
On the first tab, you can change the assignment of all keys
On the first tab, you can change the assignment of all keys
and save them under two profiles.
Also set the polling frequency, the values
of the 4 DPI profiles and, of course, the backlight.
And it has here a setting for selecting the mode, speed and effects.
And it has here a setting for selecting the mode, speed and effects.
Backlight by the way RGB so you can choose absolutely any color,
but backlight is not bright and not very uniform,
especially noticeable in the backlight buttons.
On the second tab of the settings you can choose again the speed of the cursor,
the speed of scrolling, the speed of the doubleclick, and of course write down the macros.
the speed of scrolling, the speed of the doubleclick, and of course write down the macros.
Here is an interesting and unusual Chinese mouse,
a simple sensor, a nice appearance and build, an eccentric weighting adjustment,
a weak backlight and software with macros for 15$.
a weak backlight and software with macros for 15$.
I will not advise you it or disadvise you, I will say right away
that it can not be called a real gaming mice, the sensor will not let it,
but you can use it with comfort, the main thing
is that you would not rub your hand like me.
Draw conclusions yourself, tried to be as detailed as possible and that's it,
Draw conclusions yourself, tried to be as detailed as possible and that's it,
Thank you for your attention, i hope the video was interesting)
If this is so Subscribe to the channel, rate the video as you see fit,
write your opinion in the comments and of course
see you in the next very important video, which will be just a couple of days away.
Do not miss.
Do not miss.
With you was the "IT Verdict Channel", bye!
Dear friends!
If you are buying electronics in Chinese stores,
then I highly recommend to visit our store.
then I highly recommend to visit our store.
It is located on "Vk.com",
where you can find only the best products from the largest Chinese trading networks.
Our store will save you from multiple repetitions
of the same product in searhing and from unscrupulous sellers.
You can find any product by the search in our store,
also you can subscribe for any category and ask us
to find that you want to buy.
to find that you want to buy.
We look forward to your support. Thank you!
We look forward to your support. Thank you!
Không có nhận xét nào:
Đăng nhận xét