Waching daily Jul 31 2018

Today, I must definitely read a chapter of this book

only...

U.... 376 - 287... 89 page... ...

No, no, do not sleep!

For more infomation >> [#ShiningNikki] Nikki Ngủ Gật Cực Đáng Yêu! - Duration: 0:48.

-------------------------------------------

2nd Life - Reverse - Duration: 3:05.

Skylr Infinite

For more infomation >> 2nd Life - Reverse - Duration: 3:05.

-------------------------------------------

This Is Us - Moments: Deja Vu (Digital Exclusive) - Duration: 5:05.

For more infomation >> This Is Us - Moments: Deja Vu (Digital Exclusive) - Duration: 5:05.

-------------------------------------------

2015-2018 Mustang EcoBoost MBRP 3" Down Pipe - Off-Road Exhaust Sound Clip & Install - Duration: 17:34.

Hey guys, Adam here with americanmuscle.com.

Today we're taking a look at, listening to and installing the MBRP 3-inch off-road down

pipe, available for all 2015 to 2018 EcoBoost Mustangs.

If you're the owner of that four-cylinder S550, you might be looking to bump up the

sound, the volume, the power and of course that turbo sound.

If that's what you're looking for, the MBRP off-road down pipe is a perfect match.

This is gonna delete your catalytic converters which I wanna say up front here, does require

a tune which basically means you're gonna pick up a ton of power as these EcoBoost do

on the dyno.

Now this one has a three-inch diameter with mandrel bent tubing, which means your air

flow is streamlined from the turbo back.

Which means you're picking up more power than your factory one.

And as you heard from our sound clips, three out of five on our loudness meter.

It's not too overwhelming, not a whole lot of drone inside the cab here.

But there's a ton of turbo sound which is perfect for these EcoBoost motors, they love

this down pipe.

Now with that in mind, this is gonna be running you just over 400 bucks which I think is very

worthwhile if those are the things that you're looking for it for your own S550.

Now the installation for this down pipe, I'm gonna give one of the three wrenches on a

difficulty meter here, if you're working on a lift.

If you're working at home in the driveway with simple jack and jack stands, might be

a little bit more difficult, you have a little bit less room to work with.

I'd give it a little bit of a softer two out of three wrenches on our difficulty meter.

It'll take you about an hour on a lift, maybe two hours if you're working on the ground.

Without further ado, I wanna show you guys how this gets done, so let's get to it.

Tools needed for this install are a flathead screwdriver, ratchet, extensions, 13 millimeter

deep socket, 15 millimeter deep socket, seven-eighths wrench, 15 millimeter ratcheting wrench.

For those with access to air tools, recommend an air ratchet to make things easier.

So to kick off our uninstall, the first thing we have to do is pop open our hood.

I'm gonna disconnect the upper O2 sensor on our passenger side.

So the first step in the uninstall is to disconnect the harness connecting your upper O2 sensor

on the factory down pipe, so let's get to that.

Here's your O2 sensor on the upper side, follow this green wire up to this connector.

This is actually held on by a push clip, so you can pull back on it and it'll come out

of place.

From here you can disconnect this, give it a pinch, pull back and it's disconnected.

So now that the O2 sensor is disconnected on the upper side, we have to get to the lower

one.

In order to do that, we're gonna put the car up in the air.

Now we're using a lift, but if you're working at home you can use a jack and jack stand.

All right, so we disconnected the wire for the upper O2 sensor, now it's time to tackle

the lower one.

So you got a little less room to work with here now that we're underneath the car.

If you follow your secondary O2 which is actually on the catalytic converter itself, follow

that back here to the trans, you're gonna see this clip clipped into this pre-drilled

hole here with a white snap-on clip here.

So what we're gonna do is push up on it to disconnect that clip.

We're gonna pull back on the wiring here with a little pinch and that'll disconnect our

O2 harness.

All right after the O2s are disconnected, the next step is to actually start removing

the bolts on the mounting bracket, sitting on your cat to the trans.

So we're gonna use these two bolts to remove the nuts, disconnect this plate and then loosen

but not fully remove the two bolts on the trans itself.

So I'm grabbing my 13 millimeter socket, let's get these off.

There we go, you wanna save this hardware, set it aside for later.

All right, the two on the other end of that same bracket holding it to the transmission,

you wanna use your 13 mil socket to loosen them up but not fully remove them.

You just wanna leave a little wiggle room to be adjusted.

That's all we really needed.

We needed just a little bit of room to get those off of the studs.

All right, next up we get to the fun part.

I'm gonna grab my 15 millimeter socket, we have to remove the two bolts holding on the

down pipe to the turbo end.

Now this one can be a little bit tricky, there's not a ton of space but then again we're working

with a lot more space than we would have in a five liter Coyote motor.

What we're gonna be doing, is gonna be taking our 15 millimeter socket and our ratchet,

getting up in here from the bottom to work on our lower bolt.

I'm gonna crack it loose, switch over to my air ratchet and get it off that way.

Just a little bit easier.

If you don't have air ratchets, of course just a simple hand ratchet will definitely

do the trick.

I'm just gonna try to make my life a little bit easier.

Once we get that bottom one off, I'll be doing the same thing from the top.

All right this is actually really simple with a hand ratchet, so I'm not even gonna need

to switch over to air.

I'm just gonna work this nut off of that stud and we'll move on to the top one.

We got it loose enough, I'm gonna work it off with my thumb.

All right, so we got that bottom nut out.

So what we're gonna do is the exact same thing for the top one and then it'll disconnect

from the turbo.

All right, now we can work on the top one up here.

So we have a lot more room to work with.

I'm gonna switch over to the air tool now simply because I can actually get it to fit

in here.

That'll just make life a little easier.

All right, got that top nut loosened up and pull that down.

Now you can see, down pipe is now disconnected from the turbo.

All right, so far we've got the O2 sensors disconnected at the cat and up top, we've

got the two bolts disconnected holding the flange onto the down pipe to the turbo, now

all we have left is to pop off this hanger from the isolator and remove the two bolts

here at our mid pipe.

So I'm gonna use a hanger removal tool, pop this out of place, switch over to my 15 millimeter

socket and get these two off.

Wanna be careful once you pop this out of the hangar, it will drop down a little bit,

just watch your head.

All right, we've got a 15 millimeter socket here.

I'm gonna crack these loose, get these two off and then we'll be able to disconnect your

down pipe and set it aside.

All right, guys so we finally got our factory down pipe off our 2018 EcoBoost and on the

table sitting next to our MBRP off-road down pipe.

Now there are very clear differences between the two.

The biggest one is the lack of catalytic converter.

Now our factory cat is sitting right here which is pretty big and also pretty restrictive.

As you can see, the off-road version here deletes that catalytic converter and has straight

pipe going from the turbo all the way back to your mid-pipe.

That's gonna make a huge difference in not only the sound but also you're gonna pick

up a little bit more power because there is nothing restricting that airflow there.

Now this is a 3-inch mandrel bent tubing, which means it's got a smooth airflow from

start to finish.

Which is a little bit better than your factory option here and also the stainless steel from

MBRP is gonna hold up a little bit longer.

Now, along with that I do want to point out that the off-road version is meant for just

that, off-road.

Typically in the most places in the U.S. and overseas you're not going to be able to use

this for street use.

It is gonna be illegal for the road, so you wanna check with your local laws and regulations.

If you are worried about that and you don't wanna pick up the off-road version, you wanna

keep it street legal, you wanna go with the catted version from MBRP.

Now the cats from MBRP are gonna be a high flow cat, so it is a little bit less restrictive

than your factory one.

But if you're going for absolutely zero restriction, maximize the gains, the off-road version is

the way to go.

There's a couple things we have to transfer over from the factory one to the new one from

MBRP before we get it installed, including the gasket here, that's gonna go right into

your factory flange.

It's factory size, so it's direct OEM fitment.

After that we'll also be transferring over the plate that's gonna hold it to the transmission,

as well as the clamp at the back end here which will go right onto this two and a quarter

inch outlet.

That two and a quarter inch outlet is gonna go perfectly with your factory catback.

You're going with an aftermarket exhaust, you wanna make sure that the inlet for that

and going into the outlet of the down pipe is two and a quarter inches for a perfect

fitment.

Now without further ado, let's transfer over a couple of things.

Finish off by transferring our O2 sensors, then we'll install it in our EcoBoost.

I'll use my seven-eighths wrench that I have here to remove our upper O2, transfer it over,

do the same thing for the lower.

Now guys, remember the reason that this is a tune required down pipe, is simply because

you don't have a catalytic converter here.

This O2 to sensor is gonna be reading that something is wrong, catalyst deficiency is

probably the code it would throw.

So you're gonna need a tune to recalibrate for this particular O2, simply because it's

not gonna be reading properly.

It's expecting there to be a catalytic converter there.

There isn't, so that's why we need the tune.

Now if you don't get a tune and you install the off-road down pipe without one, then your

car is gonna be running a little bit differently, it's gonna be running a little poor, you're

gonna see a drop in gas mileage, you're gonna see a weird sound, it's not gonna be running

as good.

So that's definitely gonna be an issue if you don't get a tune.

You definitely wanna pick one up while you're doing this down pipe to correct for that issue.

So last thing we need to do here, transfer over the clamp on the bottom side.

Now you'll notice back here there's a little bit of a clip.

That's actually gonna prevent it sometimes from coming back out, so if you can't pull

this up with your finger like I am now, you can use a flathead screwdriver to put it in

there and just pry it off.

So what we're gonna do is bend that back, pull it back and you can see that it was stopping

on that little stopper there.

So transfer this over to our new down pipe.

And we're good to go.

First thing we need to do for the install itself is to make sure our factory gasket

is going into place properly.

You are gonna be reusing this, so do not dispose of it after your uninstall of the factory

down pipe.

What you're gonna do is put the ball flange side on the inside of where it mounts at the

turbo.

That way this stays in place while you try to mount this.

Let's go ahead and put this in place.

All right, so we're gonna put our gasket up here, ball flange side you want facing outward.

That will actually seat right where you need it to.

Feed your down pipe upward, line up your gasket and your flange.

Put the studs to the holes in the flange.

All right, once you have your flange lined up and your clamp is in place over the studs,

grab the factory nut and thread it over by hand.

All right now before we tighten down the bolts holding it on it by the turbo side, I actually

like to tighten down this bracket here because that'll keep the down pipe exactly where you

need it to be position wise.

So you're gonna line up here, make sure that you like this position and that your down

pipe is tight all the way at the turbo side.

So what you're gonna do is take your 13 millimeter socket, tighten down these bolts so that bracket

can hold it in place.

What we can do is go right back up top and tighten down those bolts.

Now guys remember, if you're having trouble tightening down the top bolt you could always

do that with your car on the ground from under the hood.

You have a really good access point from the top view, so if you're having trouble from

the bottom you could always do it from the top.

All right, so now we're gonna connect our back piece to our mid pipe here.

Make sure you have the band clamp over the turbo side and then of course your factory

clamp out by the mid pipe.

Gonna do front side first.

All right with everything in place here, before we tighten down our clamps, we wanna make

sure we're sliding our hanger into our factory isolator, then we can tighten everything down.

I'm switching over to air tools here just to make my life a little easier for the clamps,

could always use a regular ratchet as well.

Only a couple things left to do here for the install.

All we have to do is finish up our bracket here with that plate we took off in the beginning,

plug in our lower O2 sensor.

We're gonna put our car on the ground, plug in our upper O2 sensor and we'll be good to

go.

Let's get to it.

All right, now we just plug in our lower O2 sensor.

Now we can put our car on the ground, reconnect our upper O2 sensor from under the hood and

we're good to go.

Last up here, plug in our upper O2 sensors which as you can see it's that green wire

down here that we disconnected in the beginning.

Feed this up and over.

So we have this red harness we're gonna connect it to.

Snap that into place.

We can reconnect these plastic clips to the side bracket here.

All right guys we have it all complete with the installation but since it is a tune required,

gonna grab our handheld tuner here from SCT, install the tune on our car and get going.

So if you're at home and you're picking up this down pipe, remember this does require

a custom calibration in order to work properly, you're gonna be throwing all kinds of codes

and running pretty rich if you don't do so, so I'm gonna go ahead and install our tune

here.

That's gonna wrap up my review, sound clip, and install of the MBRP 3-inch off-road down

pipe, available for the 2015 to 2018 EcoBoost Mustang.

If you're the owner of that four-cylinder S550, you might be looking for a better turbo

sound, better volume and of course a little bit more power.

If that's the case, you can pick yours up right here at americanmuscle.com.

For more infomation >> 2015-2018 Mustang EcoBoost MBRP 3" Down Pipe - Off-Road Exhaust Sound Clip & Install - Duration: 17:34.

-------------------------------------------

[ENG] LuHan × Coca-Cola TVC_ DJ Lu version - Duration: 0:31.

Love music, that's how it feels

For more infomation >> [ENG] LuHan × Coca-Cola TVC_ DJ Lu version - Duration: 0:31.

-------------------------------------------

Lost Sky - Dreams [ONH Electronic] - Duration: 3:36.

For more infomation >> Lost Sky - Dreams [ONH Electronic] - Duration: 3:36.

-------------------------------------------

Leveling Up With Jen Young from Outdoorsy! (Coming this Week) - Duration: 0:58.

- Today we're going to Outdoorsy,

which is a ride sharing marketplace for RVs.

Take out an RV, take your friends and family

and go have fun.

We have Jen Young, who's one of the co-founders.

- This is the way to hit some of your own financial goals

outside of just some extra money.

There are 13 million RVs in just the United States alone.

That's a market right there.

- We also jump around in different,

like I'm here today but sometimes

I'll be back in another space.

- What's the reasoning for jumping around like that?

- It's just nice to work next to different people,

just get to know what they're working on.

- I think that's huge.

- We must've been crazy!

We sold our houses, we moved in to a trailer.

Without any 100% guarantee that it was going to be

a huge business, which we needed it to be.

- How do you go about learning,

how do you go about getting better

not just around marketing,

but just as a human being or entrepreneur?

Check it out, go to Outdoorsy.com

and we'll see you in the next episode.

For more infomation >> Leveling Up With Jen Young from Outdoorsy! (Coming this Week) - Duration: 0:58.

-------------------------------------------

Author Min Jin Lee's easy family recipe recipe for Stuffed Cucumber Kimchi - Duration: 6:04.

Min Jin: Hi my name is Min Jin Lee

Min Jin: and I'm the author of Panchinko

Min Jin: and today we're here to do a really cool thing.

Min Jin: We're going to make kimchi

Min Jin: with my mom.

Mi Hwa: Hi.

Min Jin: So the first thing that we're going to do is make the salt

Min Jin: bath. And that sounds more complicated

Min Jin: than it is. It's just water

Min Jin: and salt

Min Jin: and you boil it.

Min Jin: Yeah.

Mi Hwa: Three tablespoons of salt,

Mi Hwa: yes.

Min Jin: So in the book there's a really

Min Jin: important section when my main character

Min Jin: needs money.

Min Jin: So she and her sister at the site

Min Jin: sold kimchi in the streets.

Min Jin: And that idea came to me because

Min Jin: women around the world who are poor

Min Jin: and illiterate who have very little basis for capital

Min Jin: will usually make food

Min Jin: and sell it.

Min Jin: You will have 16 pieces because eight times two

Min Jin: is sixteen. And I'm a writer

Min Jin: and I can do that much math.

Min Jin: And I wanted to ask my mother before

Min Jin: why she cuts it this way

Min Jin: because I thought maybe she could cut it this way.

Min Jin: She said no it's more stable so you don't cut your

Min Jin: hands.

Min Jin: So safety is first.

Mi Hwa: It's very cheap now. Season. While

Mi Hwa: I'm waiting for the boiling

Mi Hwa: water. Yes.

Mi Hwa: I have to prepare for the

Mi Hwa: Chinese cabbage.

Mi Hwa: And just cut.

Min Jin: The ends?

Min Jin: And you're going to have about one

Min Jin: and a half cups of Chinese chives

Min Jin: that you will need for the stuffing for the cucumbers.

Min Jin: And there's also a theory in Korea

Min Jin: that if men like this it makes

Min Jin: them more virile, just

Min Jin: saying.

Min Jin: I don't know if this is true.

Min Jin: But if you eat Chinese chives.

Mi Hwa: It's really true.

Mi Hwa: Because my grndmother, my mother's side. Yes,

Mi Hwa: all the time.

Mi Hwa: I like this one.

Mi Hwa: When I was in young.

Mi Hwa: Yes.

Mi Hwa: I ask my grandma.

Mi Hwa: I like to eat this.

Mi Hwa: And then grandmother said no no give

Mi Hwa: to your father.

Min Jin: Because nice girls don't eat Buchu.

Mi Hwa: I think so. That's the why my grandma

Mi Hwa: said this.

Min Jin: That's what grandma said so I don't argue

Min Jin: with this.

Min Jin: But women are allowed to eat it

Min Jin: too.

Min Jin: If you look at the cucumber kimchi recipes

Min Jin: around not everybody does this

Min Jin: because of all the views boiling water

Min Jin: for cucumbers in the Chola

Min Jin: region of South Korea.

Min Jin: This is what they do.

Min Jin: But this is actually a more effective way of doing

Min Jin: it. We tried it all different ways.

Min Jin: Right now she's cutting the

Min Jin: scullions.

Min Jin: Right now we have scallion,

Min Jin: chives and onion together.

Min Jin: So you take rice flour

Min Jin: like this,

Min Jin: which makes it gluten free.

Min Jin: But if you have all purpose flour that's fine

Min Jin: too. So you can use this

Min Jin: or you could use something like this

Min Jin: and you add

Min Jin: one tablespoon of rice powder,

Min Jin: rice flour, three tablespoons

Min Jin: of water and

Min Jin: mix.

Min Jin: So you add the slurry into this

Min Jin: soh mixture. This is called

Min Jin: oi soh bahgi.

Min Jin: So oi means cucumber.

Min Jin: Soh is the content

Min Jin: or the dressing and bahgi just means it's the

Min Jin: verb, which just means to stuff.

Min Jin: How much ginger is that?

Mi Hwa: About one tablespoon.

Mi Hwa: This kimchi does not need lots of spice. All my

Mi Hwa: life I cook for my husband,

Mi Hwa: my children.

Min Jin: There you go. Thank you.

Min Jin: I really appreciate that.

Mi Hwa: And garlic.

Min Jin: So you make the soh now?

Min Jin: Yeah.

Min Jin: I mean

Min Jin: I love garlic

Min Jin: and

Min Jin: fish sauce.

Min Jin: It's already been pre-measured, so how much

Min Jin: fish? Two tablespoons of fish sauce. And Gochugaru. This

Min Jin: is two full, heaping tablespoons. I

Min Jin: think we are ready to.

Min Jin: I think you are ready.

Min Jin: Is it time for the gloves?

Min Jin: Yes.

Min Jin: Stir it very, very well.

Mi Hwa: OK.

Mi Hwa: See that? Yes.

Mi Hwa: And

Mi Hwa: hold this way.

Mi Hwa: About one table

Mi Hwa: one tablespoon of

Mi Hwa: amount just to put it inside

Mi Hwa: to this way and the other way

Mi Hwa: and then hold it.

Min Jin: This about half a cup of water?

Mi Hwa: Little bit. Even less than half. Good, that's

Mi Hwa: enough.

Min Jin: And a pinch salt.

Min Jin: Very very little liquid in this kimchi

Min Jin: recipe.

Min Jin: And kimchi's a really special thing in my family

Min Jin: because kimchi one of the most important things

Min Jin: that defines Korea.

Min Jin: And I love it.

Min Jin: It's really good.

Min Jin: We have one more piece to go.

Min Jin: Did you hear that? Yes. You hear that crunch?

Min Jin: That's high quality crunching.

Min Jin: Thank you for joining us.

For more infomation >> Author Min Jin Lee's easy family recipe recipe for Stuffed Cucumber Kimchi - Duration: 6:04.

-------------------------------------------

Jilted and Jealous | Deadly Women: Quick Hits - Duration: 7:28.

DeLong: DESPITE EVERYTHING DARCY HAD GOING ON,

SHE WANTED MORE.

Narrator: SOME WOMEN LET LOVE RUN FREE.

OTHERS LIKE TO TIGHTEN THEIR GRIP.

DARCY, STOP THIS.

YOU KNOW YOU WANT ME.

A JILTED LOVER WANTS THE ULTIMATE REVENGE.

SHE WANTED TO HURT HIM DEEPLY.

♪♪

IN THE MIDDLE CLASS SUBURBS OF DENVER, COLORADO --

A PORTRAIT OF FAMILY HAPPINESS.

OH, BE CAREFUL.

28-YEAR-OLD DARCY MATLOCK

SEEMS TO HAVE IT ALL.

GO! AAH!

[ LAUGHS ]

DeLong: DARCY HAD A GOOD JOB.

SHE'S MARRIED -- LITTLE 4-YEAR-OLD GIRL.

EVERYBODY LIKED HER.

OH, YOU MUST BE TIRED. NO?

HANG ON. LET ME FIX YOUR HAIR.

DON'T FORGET, I'M WORKING LATE TOMORROW.

YOU'VE BEEN WORKING LONG HOURS LATELY.

DON'T I KNOW IT? HEY, YOU WANNA SWING?

-ALL RIGHT! -LET'S GO.

♪♪

Olsen: SOMETHING WAS HAPPENING AT THE OFFICE.

DARCY WAS HAVING AN AFFAIR WITH A YOUNG MAN NAMED RON.

HAVE A GOOD NIGHT.

YOU TOO. NIGHT.

DESPITE EVERYTHING DARCY HAD GOING ON,

SHE WANTED MORE.

♪♪

Narrator: BEFORE LONG,

HER HUSBAND HEARS ALL ABOUT DARCY'S AFFAIR.

♪♪

HEY.

WHERE HAVE YOU BEEN?

JUST OUT WITH A GIRLFRIEND.

STOP THE LIES.

♪♪

THAT'S A TREMENDOUS LOSS FOR ANYONE,

EVEN THOUGH SHE BROUGHT IT ON HERSELF.

♪♪

I MISS HER.

YOU'LL SEE HER.

Narrator: DARCY SEEKS COMFORT IN THE ARMS

OF HER NEW LOVER, RON GRIFFIN.

WELL, YOU'VE GOT ME.

SHE MOVED IN WITH HER BOYFRIEND, RON.

♪♪

BUT SHE WAS VERY DEPRESSED ABOUT LOSING HER MARRIAGE.

Narrator: BUT HER LIVE-IN LOVER

ISN'T ALWAYS THE COMFORT SHE NEEDS.

I DON'T THINK RON WAS VERY HAPPY.

AND THINGS DISINTEGRATED IN THAT RELATIONSHIP.

YOU ARE SO FUNNY.

NO, REALLY, LIKE, I DID EXACTLY THE SAME THING LAST WEEKEND.

♪♪

WERE YOU HURT? OKAY?

OH, NO, NO, NO. I'M FINE.

THAT'S -- THAT'S AMAZING.

EXCUSE ME.

♪♪

I GAVE UP EVERYTHING FOR YOU.

GET REAL.

YOU WANT SOME SALT AND PEPPER, BABE?

YOU KNOW IT. [ BOTH LAUGH ]

HERE YOU ARE. SMELLS AMAZING.

RON FELL IN LOVE WITH SOMEONE ELSE.

Narrator: 24-YEAR-OLD ANDI HANKS-GRIFFIN...

TO US. ...IS SINGLE AND STABLE.

HOW WAS WORK? IT WAS GOOD.

IT WAS GOOD.

I MISSED YOU, THOUGH.

I MISSED YOU, TOO.

A WHIRLWIND ROMANCE LEADS TO MARRIAGE.

BUT DARCY CAN'T ACCEPT

SHE'S BEEN DUMPED FOR A SECOND TIME.

THIS FUELED AN OBSESSION WITH DARCY.

I MEAN, SHE COULD NOT STAND THAT SHE LOST RON.

♪♪

SHE STARTED STALKING, SNEAKING AROUND.

SHE WANTED TO HURT HIM DEEPLY.

♪♪

Narrator: DENVER, COLORADO,

1993 --

DARCY MATLOCK'S OFFICE AFFAIR

COSTS HER HER MARRIAGE AND DAUGHTER,

AND NOW HER LOVER. [ DOOR SLAMS ]

BUT SHE'S NOT TAKING IT QUIETLY.

DARCY HAD BEEN CLAIMING TO EVERYBODY

THAT RON WAS ABUSING HER...

I DIDN'T TOUCH HER. SHE -- SHE'S MAD.

YOU'RE SACKING ME?

YEAH, I'M SORRY.

♪♪

BUT THAT WASN'T ENOUGH. SHE WANTED MUCH MORE.

♪♪

[ DOG BARKING ]

RON!

THERE'S SOMEONE OUTSIDE.

Narrator: DARCY'S STALKING STEPS UP A NOTCH.

[ TELEPHONE RINGING ]

HELLO? ENJOY YOUR DINNER TONIGHT?

WHAT? YOU KNOW YOU'RE LIVING

WITH AN OUT-OF-WORK LOSER?

-DARCY, STOP THIS! -YOU KNOW YOU WANT ME.

DARCY WAS CONSUMED WITH JEALOUSY.

♪♪

♪♪

Olsen: DARCY REALLY DIDN'T WANT TO TALK TO RON.

SHE WANTED RON TO GET AWAY FROM THE HOUSE.

Narrator: DARCY IS VISITING SOMEONE ELSE IN DISGUISE.

♪♪

♪♪

[ SCREAMING ]

[ GUNSHOT ]

♪♪

Olsen: MOST PEOPLE WOULD THINK KILLING RON WOULD BE

HER TICKET FOR REVENGE.

BUT REALLY, KILLING RON JUST KILLS RON.

TO RUIN RON'S LIFE WOULD BE TO KILL THE ONE HE LOVES.

Narrator: DARCY'S NEXT MOVE IS EQUALLY BIZARRE.

IT'S ME.

I SHOT RON'S WIFE.

SHE'S CALLING HER EX-HUSBAND.

WILL YOU MEET ME?

HER EX-HUSBAND WAS SMART ENOUGH

TO KNOW NOT TO DO THAT.

OKAY, UM... JUST STAY THERE.

I'LL -- I'LL COME NOW.

OKAY, HURRY.

PERHAPS HE WAS AFRAID HE MIGHT BE THE NEXT TARGET.

I WANT TO REPORT A SHOOTING.

[ POLICE RADIO CHATTER ]

Narrator: DARCY'S IN FOR A SURPRISE.

WHEN I PULLED UP, THERE WERE SEVERAL POLICE OFFICERS

SURROUNDING A CAR.

MA'AM, OPEN THE DOOR.

SHE PULLED HER HANDS INSIDE.

SHE WENT FOR A GUN ON HER LAP.

BUT I REACHED DOWN AND RIPPED IT OUT OF HER HAND

AND PULLED IT AWAY.

GET OUT OF THE CAR.

WE DISARMED HER THAT WAY.

♪♪

DeLong: WHEN DARCY KILLED ANDI,

SHE INADVERTENTLY KILLED RON, AS WELL.

Narrator: IN 1994,

DARCY MATLOCK IS CONVICTED OF HOMICIDE

AND SENTENCED TO LIFE IN PRISON.

ENVY CAN BE DEFINED AS, "I LIKE WHAT YOU HAVE.

I'D LIKE TO HAVE IT MYSELF."

♪♪

JEALOUSY IS, "I LIKE WHAT YOU HAVE.

AND I HATE YOU FOR HAVING IT."

AND THAT WAS DARCY MATLOCK.

[ BARS CLINKING ]

♪♪

For more infomation >> Jilted and Jealous | Deadly Women: Quick Hits - Duration: 7:28.

-------------------------------------------

How to Overcome Toxic Influence (4 TIPS FOR DEALING WITH DIFFICULT AND TOXIC PEOPLE) - Duration: 5:11.

Jen O.: Want to know how to overcome toxic influence and four tips for dealing with difficult

and toxic people?

Watch this video to learn just how I do that for myself and how you can too.

I'm Jen Omohundro, from twominuteswithjen.com.

I post weekly with tips and strategies to help you go from the "no I can't" to the "no

one can stop me" mindset.

Be sure to subscribe to my channel, and hit the bell to be notified when I post a new

video every Tuesday.

Tip #1, release yourself.

Release yourself from responsibility for their behavior.

I'm going to say that again so that the people in the back row can hear.

You are not responsible for their crappy behavior.

An important thing to understand is that the law of attraction only applies to you.

Just like it only applies to me, and it only applies to him, and it only applies to her.

What that means is when you give positive energy, you are getting that positive energy

back.

When you give negative energy, you are getting that negative energy back.

So this person who is toxic and who is giving out the negativity, they're the one that is

going to receive the negativity back.

Take some comfort in knowing that, and release yourself from responsibility for their behavior.

In my video, How Beliefs Shape Reality: 3 simple tips to change how you think, change

your life, I discuss the law of attraction and how you can use it to begin to magnetize

great things to you.

The link to that video is found in the description below this video.

Tip #2, the crazy horse.

That's all good and great, Jen.

I'm not responsible for their crappy behavior when they're taking it out on me, but how

in the world am I supposed to respond when they're doing that?

Well, this is one of my favorite tips, and I got this from the book The Power, written

by Rhonda Byrne.

She calls it a wild horse.

I call it a crazy horse.

She talks about when she's around someone who is negative and trying to bring her down,

she just uses this visualization method and pictures them as jumping on a wild horse,

or a frustrated horse, or an irritated horse.

You get it.

When they're negative and they're going nuts, they're on this, quote-unquote, "horse."

I think it's hysterical, and it works so well for me, not just when I'm around someone who's

being a Negative Nancy, but even when my kids are acting crazy.

It's helped me so much to just picture them jumping on their crazy horse so that I have

the choice to know either I can jump on it with them, or I can just laugh at it and jump

on my own happy horse and ride off.

If you have a technique similar to the crazy horse visualization that works for you, I

would love to hear it in the comments below.

Tip #3 is ditch the high horse.

Since we're on the topic of horses, you don't want to go climbing on a high horse.

We each have the right to our own beliefs and our own feelings, so don't think that

climbing on a high horse and trying to convince someone who's negative that you are absolutely

100% right is going to do either of you any justice.

It's not.

Actually, in the terms of law of attraction, it's going to do just the opposite for you,

because judging and trying to convince someone of something that you believe in when they

don't believe in it, you're putting out negative energy.

You don't want that coming back to you, so let's just be safe, and let's stay off that

high horse.

Tip #4 is to give love.

No, I am not asking you to try to turn a negative into a positive by loving something about

someone that you simply don't love.

That would put me on my high horse.

What I am saying is to give love to the traits about this person that you actually do love.

You can tell them, sure, if you want to tell them, or just simply try to focus and think

about those traits of the person, and try to give zero thought to those negative traits.

Remember, positive energy is much, much more powerful than negative energy.

And bonus tip, walk away.

Of course, I can't give tips and advice on dealing with toxic and negative people without

reminding you that you do have the choice to walk away.

And if you happen to be in a situation that is much more than toxic and is actually abusive,

please seek appropriate help for that situation.

I'm including the website and the number for the National Domestic Abuse Hotline below

in the event that you should need it.

So now you know these tips to help guide you when dealing with toxic and negative influence.

Be sure to join me next week to learn how to turn your fantasies into reality by giving

yourself permission to fantasize.

If you liked this video, please let me know by liking it below, subscribe and share with

someone that you know that is also looking to get out of their own way and live their

best life, and comment below with Yes if you thought this video was helpful for you.

Also, if you are serious about transforming your life, be sure to subscribe to be one

of the first to know about my Mindset Reset program as soon as it's available by clicking

the link in the description below this video.

Thank you, and I'll see you in the next video.

For more infomation >> How to Overcome Toxic Influence (4 TIPS FOR DEALING WITH DIFFICULT AND TOXIC PEOPLE) - Duration: 5:11.

-------------------------------------------

Como Decorar Quarto de Bebê | Leroy Merlin - Duration: 2:56.

For more infomation >> Como Decorar Quarto de Bebê | Leroy Merlin - Duration: 2:56.

-------------------------------------------

PICHU IN SMASH FLASH 2 | Super Smash Flash 2 Beta 1.1 - Duration: 8:57.

For more infomation >> PICHU IN SMASH FLASH 2 | Super Smash Flash 2 Beta 1.1 - Duration: 8:57.

-------------------------------------------

DEPOIS DE VER UM DEPOIMENTO ELA DESCOBRIU COMO VENCER O DESCOLAMENTO DE RETINA - Duration: 3:09.

For more infomation >> DEPOIS DE VER UM DEPOIMENTO ELA DESCOBRIU COMO VENCER O DESCOLAMENTO DE RETINA - Duration: 3:09.

-------------------------------------------

How I Made: Stop Our World | Nico Lud Remix - Duration: 6:23.

Hey, I'm Nico Lud!

Today it's all about my "Stop Our World"-Remix

I hope it'll work this time...

I already recorded it 3 times

If you can listen to it now, you know it worked out :)

Although this video is about how I made the remix

and.. of cause I didn't start with producing the intro

I startet with the drop

I will start with the intro and then go through everything till the end

The remix starts with the radio

that plays the piano track

I created this sound using an old radio

I used this radio transmitter

technically intended for pluging it into a smartphone

Instead I plugged it into my audio interface

You can set the frequency

Then it sends the audio over that frequency to the reciever

I recorded that using a mic

Later I layered it with the original track

with iZotope Vinyl

I set it to emulate a Vinyl from the 60s

So it sounds more "real" I used my FX-Rack

SPACE CONTROL

I panned it to the left

It is binaural

When a sound comes from the left side

the sound arrives at your left ear earlier

I also added some radio sound

so it sounds more "real"

Also I added a field recording in the background

It just matches the vibe perfectely

I send it to a reverb bus

the reverb is panned to the right

Then it transitions from the vintage radio sound

into the clean and modern sounding VERSE 1

The drums are nothing special

First just the kick

Later I added more percussion

These are "Echo Drums"

...much Delay and Reverb...

for that transition

and as percussion in the background

I really like the fact, that

I tried to make it relate to the lyrics

For example

a wave that goes from left to right

This is my vocal effect chain

Somehow I never make vocals completely mono

I use the OZONE IMAGER

and give them a little bit of space

make them a little bit wider

What I usually don't do

I made everything above 10kHz really wide

so the higher notes really cut through

The chord progression change came really randomly

I happen to move the piano track by accident

And I really liked that chord progression change

It matched the vocals perfectely

So I kept it :)

Maybe you noticed that in the last bar before the Drop

the lower part of the freq spectrum is really empty

I made it so the drop hits harder :D

Birds chirping

Clock ticking sound

Valhalla Plugin for the delay

Two Plings :)

I really like that the vocal transitions into the vocal chops seamlessly

On the last beat it get's really quiet

Here is the kick again

These days many producers use Synths to emulate what acoustic instruments used to do in the past

I turn that around

I use acoustic instruments to emulate what synths do

This time I use Strings as a super saw

There are 3 Groups

Left / Center / Right

I panned them of cause :)

For more attack I added bongos and congas

With Reverb / Delay Automation

The vibrato of the strings at the end is made using Auto-Pan

I moved the "Phase", that it just automates the volume, not the panning

The bass also pannes to Left / Center / Right

But the sub bass is in mono of cause :)

You really don't notice the panning that much in the final track

Drums & Percussion

When the drop repeats I added a few elements

e. g. this ride cymbal

Or this strange sound, that I can't describe xD

Those guitars with delay

Just a few samples, that matched the vibe

I pitched and edited them so they fit very well

This is another idea of the drop that I had earlier

For more infomation >> How I Made: Stop Our World | Nico Lud Remix - Duration: 6:23.

-------------------------------------------

Norin Phạm - Thánh Chửi LiveStrym tao mệt mỏi quá chúng mày ơi ... - Duration: 43:56.

For more infomation >> Norin Phạm - Thánh Chửi LiveStrym tao mệt mỏi quá chúng mày ơi ... - Duration: 43:56.

-------------------------------------------

Best Plant Pest Control Method + 6 Natural Ways with Organic Pesticides - Duration: 7:16.

Hello Friends! Today, I will list out the best natural ways for your plant pest control

and they are really very easy and 100 percent organic pest control methods. The last trick

will eliminate more than 80 percent pests in just one single shot, specially those mealybugs,

aphids, spider mites, whiteflies and many more. Thats Coming up.

If you are interested in growing plants, consider subscribing to this channel and also turn

on the bell icon to receive notifications of my new uploads.

Well, the main idea of using these methods, atleast for me is, this saves me a lot of

time and Time is really precious my friends! Here s a list of few easy methods I use. These

include natural pesticides and other simple methods.

7. Grow Plants Full of Health and Vigour: Yes, Regularly Adding organic composts like

vermicompost, decomposed cowdung or horsedung on your top layer of soil is the best way

to develop strong and vigorous plants which can resisy t or withstand these pest attacks.

I also mix organic neem seed meal powder into the soil which combats many pathogens in the

soil and also neem cake is a natural fertilizer with many micronutrients.

6. Keep Pest Repelling Plants in your garden. This is infact an easy way of keep many pests

away including mosquitoes. You have to do this strategically � like placing these

insect-repelling plants near entrances and also interspersed between your other plants

which are more prone to pest attacks. There is a long list of such plants � I have listed

out these names in these slides on the screen. This is taken from Wikipedia website. You

can freeze the video and make a note of this if you are interested.

Now the fifth important step is: 5. Trimming or Pruning the Affected Leaves

or branches. This step is really important because this has two benefits. This will reduce

the load of pests to be eliminated by a pesticide and also offers the benefits of pruning a

plant, that is giving out more branching. Now the fourth step is,

4. Hand Pick and Eliminate. This is actually the best method to eliminate some worms and

insects like caterpillars, slugs and snails and other leaf eating worms.

Then on Number three is, 3. Neem Oil Spray: This is by far the most

widely accepted natural pesticide spray worldwide. When you have lot of pests, spray your plants

thoroughly once weekly or atleast once in 15 days. Then a maintenance or prophylactic

dose of once a month if you have no pests in your garden. The Formula is Add 5 ml Pure

Neem oil in 1 litre of water + some 10 drops of any liquid soap for the surfactant effect

and to coat the leaves. Do a patch test on a leaf and then spray the whole garden.

Then on Number two is, 2. My Cocktail Organic Pest Spray: If your

plant pest load is too high, consider using a mixture of multiple natural oils and other

stuff to make a cocktail pesticide spray. I have discussed this recipe in detail in

my video titled Universal Pesticide recipe. You can check that later from a link at top

right corner of this video. What I used is a mixture of Clove Oil, Neem Oil and Optionally

Eucalyptus Oil and then liquid soap. This is a really powerful organic pesticide solution.

And again, Always do a patch test on a leaf to check the result before applying on entire

plant. 1. And Now Coming to the Best method of pest

control which can eliminate more than 80 percent of pests in 1 single shot. When we see these

pests damaging our beloved plants, am sure we all feel like burning them to death. But

we are helpless, we cannot burn our plants. You can only burn the cut out branches and

leaves loaded with pests, which is infact the best way to prevent contamination to other

plants. Incineration or burning is one of the best sterilization methods.

So, The only best way is to either kill them on the plants without damaging our plants

or somehow dissociate them from our plants. Yes, This method is to separate these pests

from our plants. I will demonstrate how powerful this is, so keep watching. Yes, Am talking

about the high pressure water spray in misting mode using your garden spray gun with the

correct pressure. I will reveal you everything now. How I experimented many methods to finally

settle on this method and also the other benefits of this method. First of all there is absolutely

no water pressure on your teres garden, because overhead tanks are sitting on the teres or

slightly above it. I am sure all of you agree with me on this point. Most of us must be

using the bottle spray to pump or spray pesticides which is a manual method to spray with very

little pressure and with lot of effort and time and energy consuming specially if you

have too many plants. To overcome this, First I started with the rechargeable battery operated

16 litre sprayer can. This was actually a good option with good pressure and other benefits

like portability and things like that. But I wanted to connect my multi-mode spray gun

with something like a multipurpose gadget where I can use my coiled hose with this multimode

spray gun to do all tasks like water the plants and also spray pesticides and do all in one

activity. And So, I connected my hose to this Double barrelled Self priming 12 v DC pump

which is available online actually as a car wash pump. I have given the link to this product

from a card linked at top right corner of this video and also in description. I am not

promoting this product. You can buy any similar pump and connect according to your plan and

requirement and also please suggest more ideas in the comment box so that everyone is benefitted.

As you can see, I am spraying this in pressure mist mode on this plant loaded with mealy

bugs. See the pressure and with this pressure of fine misting, any pest will definitely

dissociate from the plant, even including the underside of the leaves. After washing,

you can then spray your regular pesticide. For me, This is looking perfect so far, with

the desired pressure and options to use it as a watering equipment , pest spraying, misting

my plants and also misting or watering my seedlings and do a lot of stuff. It really

saves me a lot of time. So, there we have it folks, that was a short

episode on the best ways to control pests in your garden. Please give me a thumbs up

If you liked the video. Also tweet or share the video with your gardener friends. Comment

below with any query or any feedback regarding this. Consider subscribing if you are new

to the channel. Happy Gardening.

For more infomation >> Best Plant Pest Control Method + 6 Natural Ways with Organic Pesticides - Duration: 7:16.

-------------------------------------------

How to Make Japanese Shaved Ice - Duration: 8:12.

For more infomation >> How to Make Japanese Shaved Ice - Duration: 8:12.

-------------------------------------------

SHOCKING: Proof the Democrats were too racist even for the Nazis - Duration: 0:45.

[Speaking German]

Voiceover: As for the Democratic "one drop rule,"

incredibly, the Nazis found it too racist even for them.

Narrator: "Death of a Nation"

Voiceover: It is now up to us

to save America a second time.

Narrator: In theaters August 3.

For more infomation >> SHOCKING: Proof the Democrats were too racist even for the Nazis - Duration: 0:45.

-------------------------------------------

سديم | يوم في حياة عمر الكيخيا - Duration: 1:45.

For more infomation >> سديم | يوم في حياة عمر الكيخيا - Duration: 1:45.

-------------------------------------------

Sounds of NASA's Robotic Operations Center - Duration: 2:59.

My name is Brian Roberts.

I'm the head robotic technologist here at the Goddard Space Flight Center.

Today, we're going to take a tour of the ROC

or the Robotic Operations Center.

As you enter the ROC, you see a room that's a little bit smaller than a

gymnasium at a school.

You'll notice that the walls are

all black and that's to simulate the darkness of space so we

can shut the lights out in the room and the robots will be

in an environment that will be as dark as it is in space.

So just like sports teams practice before they play a game, we practice with

robots as well.

The first robot you'll hear is our engineering unit of the eventual robot that

will fly in space.

The reason we build that is so we can work out all the details of how to put the

robot together,

make sure it works before we build the more expensive

flight unit.

So the sound you hear sounds like hail hitting a tin roof.

What you'll hear is the brakes on the robot coming on and off.

moving back and forth and you kind of hear a tinging sound as the seven pieces

of metal are hitting each other.

This robot is a hexapod which is a motion platform

on which we mount a satellite mock-up

and the robot then moves that mock-up,

simulating its motion as it would be moving through space.

What you'll hear are

the motors moving back and forth and it kind of sounds like a car engine revving

up and revving down

as you push the gas pedal

and get more acceleration, less acceleration.

You'll hear those motors

moving the six legs of the robot up and down back and forth in front of the

robot.

The last robot you'll hear is an industrial robot that's used by car companies

and

other factories to assemble furniture, assemble cars or paint cars.

So this robot is about the size of a human, maybe six feet or so,

and it's got seven degrees of freedom, so seven individual

actuators that move.

What you'll hear is it moving through our facility and much like the previous

robot,

you'll hear the motors kind of revving up and

revving down.

Thank you for spending some time today touring our Robotic Operations Facility

and listening to some of the robots that we

use to simulate robots working in space.