Thứ Ba, 19 tháng 6, 2018

Waching daily Jun 19 2018

Hi everyone, I'm Candace Reid-Rose! I'm an aquarist here at Monterey Bay Aquarium.

If you're here, you're probably wondering, how does an octopus breathe?

[Music and Title Card: Octopus 101 | Breathing!]

Octopuses and most cephalopods kind of have this two-part body, the mantle being

the head region. That's where all their organs are going to be stored.

The siphon, you can see it lives right by their mantle.

When they bring water into their bodies, they're gonna bring water into their mantle where they have their gills.

They're gonna flush water over their gills so they can breathe and get the oxygen

from the water. And then the water is gonna come out through the siphon.

And that's also how they expel their waste.

That's how an octopus breathes!

Thanks for watching this video about giant Pacific octopuses!

Be sure to subscribe to our page for more information on giant Pacific octopus

and the other animals we have here at the Monterey Bay Aquarium.

For more infomation >> Octopus 101 | Breathing! - Duration: 1:16.

-------------------------------------------

L2 Lore #1 - Prólogo: Na Fogueira (A história de Lineage 2) Dublado PT-BR (English Subtitles) - Duration: 1:33.

Lineage 2 History

Prologue: By The Bonfire

He drew a deep breath, inhaled the smoke, and let it out slowly.

Most of his face was hidden under a thick, old hood

and behind him there was only pitch darkness.

In the dim glow of the pipe it was impossible to see his features.

He introduced himself as a bard - yet no one believed him

and we were suspicious that he traveled the dangerous forest alone.

However, he offered to tell us a story if we shared our meal and the warmth of our fire.

We agreed, if only because we couldn't leave this traveler to the cold forest.

We made ourselves comfortable by the fire, holding our weapons at the ready in case of danger,

and waited for his story to begin.

The night was ice-cold, and his low, thick voice carried quietly across the mountain...

...as, setting aside his pipe, he opened his mouth and began to speak.

For more infomation >> L2 Lore #1 - Prólogo: Na Fogueira (A história de Lineage 2) Dublado PT-BR (English Subtitles) - Duration: 1:33.

-------------------------------------------

Nightcore - I spoke to the devil in miami (XXXTENTACION) - Lyrics - Duration: 2:09.

This video includes lyrics on the screen

For more infomation >> Nightcore - I spoke to the devil in miami (XXXTENTACION) - Lyrics - Duration: 2:09.

-------------------------------------------

Watch & Learn: Century Eastern Wonders - Full Playthrough - Duration: 58:00.

For more infomation >> Watch & Learn: Century Eastern Wonders - Full Playthrough - Duration: 58:00.

-------------------------------------------

The Longest Day of the Year: The Solstice! - Duration: 3:46.

It's almost time for a very special day.

Can you guess why?

[Squeaks squeaks]

No, it's not my birthday … [Squeaks squeaks]

No, it's not the day of the parade, either.

It's the longest day of the year … and, it's the first official day of summer!

There are lots of days that might seem really long.

Maybe you've felt that way when you were excited about something that's going to

happen, like your birthday, or the first day of vacation.

The day before an exciting event can seem like it takes a long time.

But even if a day feels that way, it's not really any longer.

All days have the same amount of time in them—about 24 hours.

When we say it's the longest day of the year, what we really mean is that there's

the longest amount of daylight, which means that the sun is up for the longest amount

of time, and it's dark for the shortest amount of time.

This special day is called the summer solstice, and when it happens, it's officially summer.

Have you ever noticed that in the winter it gets dark pretty early?

It's probably dark before you go to bed.

But in the spring and summer, like now, the sun goes down much later.

[Squeaks squeaks]

Yeah, that's exactly what you asked about the other day!

Squeaks asked if he could change his bedtime so it's after dark, since he doesn't like

going to sleep when it's still light out.

But instead we just changed his curtains so they make the room darker, and that helped,

right?

[Squeaks squeaks]

We have a summer solstice every year because of the way our planet moves around the sun—and

how it's tilted.

Because even though you don't feel it, the Earth is always moving!

It takes a whole year for the Earth to go around the sun one time.

And while it's moving around the sun, Earth is also spinning around in place around an

imaginary line we call the axis.

The Earth's axis runs up and down, right through the North Pole and the South Pole.

One turn on the Earth's axis takes 24 hours — that's what makes one day.

But there's something else about the Earth's axis: it isn't exactly straight up and down.

It's tilted, just a little bit.

… and it's this tilt that causes the summer solstice!

Right now, the tilt is pointing the northern, or top half of the Earth toward the sun.

Which means that during one spin — which remember, is 24 hours, a whole day and night

— the top half of the Earth spends more time in the sun than in the dark.

The summer solstice is when the tilt is pointing us exactly toward the sun.

Here in the top half of the world, that's usually on June 21st, although it's sometimes

on June 20th or 22nd.

Soon, the tilt will start to point more sideways compared to the sun, and eventually it will

face away from the sun, on what we call the winter solstice.

That will be the shortest day of the year, with the least amount of sunlight.

But for now, while we're pointed toward the sun, we get long days!

For people who live in the southern, or bottom half of the world, everything is the opposite.

When the Earth's tilt points the top half of the world toward the sun, it points the

bottom half away from the sun.

So for people who live in places like Australia or South America, it's about to be the shortest

day of the year, not the longest!

Their winter solstice is the same day as our summer solstice, and their summer solstice

is the same day as our winter solstice!

Since it's almost our summer solstice and the first day of summer, I'm going to go

stock up on sunscreen!

Squeaks and I hope you have a happy solstice, wether it's summer or winter!

Thanks for joining us!

If you want to keep learning and having fun with Squeaks and me, hit the subscribe button,

and don't forget to check us out on the YouTube Kids app.

We'll see you next time, here at the Fort!

For more infomation >> The Longest Day of the Year: The Solstice! - Duration: 3:46.

-------------------------------------------

Denis CHERYSHEV - Man of the Match - MATCH 17 - Duration: 1:19.

Congratulations Denis.

It's the team's second win in a row.

Eight goals scored, one conceded over both games.

Is the team surprised by this?

We just wanted to make our supporters happy.

The whole country was supporting us.

We have gained their trust.

We won and we have made history by getting out of the group stages.

Now, we want to reach the next stage and keep playing, and I think we'll manage that.

How much do you appreciate the support?

Do you think it keeps the energy levels high?

Of course.

We could hear the supporters chanting our names and supporting the team.

It was amazing.

It's been great playing here and I hope we can play here again.

This is your second award.

What are you going to do with it?

I don't know.

Probably give it to my parents so they can put it somewhere.

I don't need to look at it any more.

For more infomation >> Denis CHERYSHEV - Man of the Match - MATCH 17 - Duration: 1:19.

-------------------------------------------

Hereditary - Interview with Toni Collette and Ari Aster - Duration: 7:14.

For more infomation >> Hereditary - Interview with Toni Collette and Ari Aster - Duration: 7:14.

-------------------------------------------

When Fish First Breathed Air - Duration: 9:08.

385 million years ago, the land was all but empty.

The continents were home to only some sparse plants and fungi, and a few pioneering arthropods.

Life in the oceans, however, was booming.

The waters teemed with squid, bony fish, and sea scorpions.

But there was one group of fish that was about to go its own way.

In time, these enterprising fish would undertake one of the most important journeys in the

history of life.

They'd follow in the footsteps of the arthropods, to become the first vertebrates to live on

dry ground.

But they couldn't just move onto land.

Not yet.

First, they had to acquire the ability to breathe air.

The giant leap between fish that breathed through water and fish that breathed air has

been really hard for us to study and understand.

That's partly because the organs that did the work of breathing -- either gills or lungs

-- don't fossilize well.

But it's also because, until pretty recently, there just haven't been a lot of fossils

from that time for us to study.

Fish began their transition onto land 400 million years ago, during in the Devonian

period.

And for a long time, one of the few fossils that experts had to work with was a fish named

Eusthenopteron, originally found in Quebec in the 1880s.

It lived in shallow, estuary waters around 380 million years ago.

And like the famous Coelocanth, it was a "lobe-finned fish."

Instead of having long, delicate fins with lots of joints in them, like you'd see in a

goldfish, its fins were shorter and stronger.

These hardy limbs could have helped Eusthenopteron move itself along in the shallows as it hunted

other fish, but its fins probably weren't strong enough to let it walk on land.

Another major find came about in the 1930s, when scientists uncovered Ichthyostega,

a meter-long creature found in rocks in Greenland dating back 364 million years.

Ichthyostega had a body that was a lot more salamander-like, including a fully-developed

pelvis, strong limbs, and even fingers.

But Ichthyostega still probably dragged itself around with its front legs, a bit like how

a mudskipper moves today.

And it also had a thick, paddle-like tail for swimming, which means it likely spent

a lot of its time in the water.

But perhaps neither of these fossils is as key to this story as Tiktaalik,

a 375 million year old animal found on Ellesmere Island, Canada in 2006.

Tiktaalik had a fishy body, but a head like a salamander's, and stiff, leg-like fins

that could have supported its weight outside of the water.

And most importantly, it also had bigger primitive hips, so its hind limbs had something to

anchor on to, an important step in becoming a fully four-legged animal.

However, Tiktaalik's travels on land were probably still stuck in front-wheel drive.

Even though its legs and hips were bigger than in Eusthenopteron, they weren't strong

enough to bear the strain of walking on land.

With traits that seem halfway between a fish, like Eusthernopteron, and a four-legged animal,

like Ichthyostega, Tiktaalik is a textbook example of a transitional fossil from this

time.

And despite their differences, all three of these fossils are considered to be tetrapodomorphs,

a group that includes early four-footed animals and the lobe-finned fish that are closely

related to them.

Now, one big trick to living on land, of course, is … breathing.

So how did these animals, which had been adapted for millennia to life underwater, start

to breathe air?

Well, we know that all three of our friends -- Eusthenopteron, Tiktaalik and Ichthyostega

-- had gills.

Because, even though gills themselves don't fossilize very well, the bony arches that

support the gills do.

And each of these animals had gill arches.

But even though they still had gills, that doesn't mean they couldn't breathe air.

It turns out that the most important clue for when fish started breathing air isn't

the absence of gills.

Instead, it's the shape and location of a little hole in the skull.

This hole can still be found in many fish today.

It's the opening of a tube, called the spiracular tract, that's used to bring water in toward

the gills.

This feature is really handy, because it allows fish to breathe when their mouths are busy

eating.

And this little skull hole can tell us a lot about when tetrapodomorphs first became able

to breathe air.

All you have to do is compare where it shows up in fossils, with where it appears in different

kinds of modern fish.

Now, in most modern fish, the opening to the tract appears on the sides of the face, near

the front of the skull, which puts it pretty much right on top of the gills.

But there are also fish today that breathe air.

And in one of these fish -- the bichir from Africa -- the hole is bigger, and sits

on the top of its skull, farther back, kind of like a blowhole.

What's more, the opening also sits at an angle, not straight up and down.

That's an important clue, because this angle creates a more direct path for air to travel

to the bichir's lungs.

Now, compare all of that with the skull openings in tetrapodomorphs.

In Eusthenopteron, the spiracular tract opens up near the front of the skull, just like

in most water-breathing fish with gills.

But, the hole is on the /top/ of the skull, not the side.

In this way, it kind of resembles the bichir, which uses its head-hole to breathe air from

the surface of the water.

So Eusthenopteron was maybe breathing air in addition to water, and since the hole was

close to the front of the face, they probably used their gills to handle both.

But!

In both Ichthyostega and Tiktaalik, that hole is much bigger, is closer to the back of the

skull, and sits at an angle, just like it does in the bichir.

This means the tract in these ancient animals was pointing right to where a primitive set

of lungs would have been.

It's not the clear-cut evidence that a nice set of fossilized lungs would be.

But having a larger passageway that sits closer to where the lungs are in today's lunged

fish is a good sign that both Tiktaalik and Ichthyostega had some sort of primitive lungs.

As for where these lungs came from, experts think they derived from an organ that many

modern fish still have today: a swim bladder.

Swim bladders are often filled with air, which fish gulp down to help keep them buoyant.

And the ancestors of Tiktaalik and Ichthyostega probably had them.

The thinking is that, among some lobe-finned fish, the swim bladder became bigger and contained

more blood vessels, so it became better at putting oxygen into the bloodstream.

In time, this organ took on a different function, finding a new use for the air that was already

there: breathing.

This kind of makes sense if you look at air-breathing fish today, like the lungfish and bichir.

Their swim bladders are split into two, and so full of blood vessels that they look basically

just like our lungs do.

But, why would any fish, modern or fossil, bother with breathing air, when there's all that

lovely water around?

Well, during the Devonian, things were … complicated.

And all of those complications led to a steady drop in the amount of oxygen in the oceans.

On land, new plant species were diversifying, which you'd think would be good for oxygen

levels.

Except, all of these new plants were also dying on land, and then getting washed into

the ocean.

All of that organic material fueled huge blooms of algae, and then bacteria, which in turn

sucked up oxygen from the ocean.

So by the late Devonian – right when fish start to transition onto land - oxygen in

the air was really low: some estimates go as low as 13%, compared to almost 21% today.

For animals, low oxygen is generally bad.

But for organisms that live in the water, it's even worse, because oxygen concentrations

are always lower in water than they are in the air.

So when Oxygen levels first started to fall 385 million years ago, the benefit of transitioning

onto land was pretty clear – no more gasping for breath in the water.

Being able to breathe air made Tiktaalik, Ichthyostega and maybe even Eusthenopteron

more energetic and better able to hunt their food.

And these first air-breathers eventually gave rise to the true tetrapods -- the first vertebrates

to live on dry land, full time.

Eventually, they lost their gills.

And by the time the Devonian Period had ended and the Carboniferous was underway, they had

also lost their spiracular tracts, and started using a totally different kind of skull-hole

for breathing, called nostrils.

But those lobe-finned fish that were our ancestors weren't the only fish that figured out how

to breathe air.

Today, there are lungfish, mudskippers, bowfin and bichir.

They're not direct descendants of the likes of Tiktaalik.

Instead, they each acquired that ability independently, at different times.

It just goes to show you that breathing air has turned out to be very convenient for a

lot of us over time.

So remember: For all of the breaths that you're taking today, and the way that you're taking

them, you owe your fishy ancestors a debt of thanks.

Thanks for joining me today!

And I have big news!

Eons is now on Patreon!

Patreon is a voluntary subscription service that helps keep these videos coming.

So if you'd like to support the show, head over to patreon.com/eons and sign up at any

level you want!

Now let me know what you want to learn about!

Leave a comment down below, and if you haven't already, go to youtube.com/eons and subscribe.

For more infomation >> When Fish First Breathed Air - Duration: 9:08.

-------------------------------------------

Teratomas: What Tumors with Teeth Can Teach Us About Stem Cells - Duration: 3:45.

When you hear the word "tumor," you probably think "not good."

And they can be pretty scary.

In their mildest form, tumors are just a lump of cells hanging out in your body.

At their worst, those cells are dividing and spreading like wildfire — they're cancerous.

But there's one kind of tumor that's basically straight out of a horror movie.

If you peek inside a teratoma, you might find hair, teeth, eyes, or even brain cells.

As strange as these tumors are,

the jumbles of body parts aren't actually turning into people.

But they have taught us a lot about stem cells and how early development works.

Most tumors start when a random mutation in one cell's DNA makes it go rogue and divide

too much.

So, for instance, a lung tumor might be a cluster of the cells that would normally line

your lungs.

If that tumor keeps growing, the cells can develop more random mutations, which can create

more small differences between them.

But — on the whole — it's still lung-like tissue.

Teratomas, on the other hand, look like you blended up a human and started growing something

from the goop.

And we think that's because of the cells that spawn these tumors.

Most teratomas develop from germ cells in the ovaries and testes.

Those are the cells that divide to produce mature sperm and eggs.

As you probably know, sperm and eggs fuse together to make embryos.

And the cells in early embryos have an ability biologists call pluripotency, which means

that with the right physical and chemical signals, they can become pretty much anything,

from skin cells to liver cells.

If enough random mutations happen in germ cells, they can unlock pluripotency at the

wrong time.

Combined with wildly dividing cells, that leads to teratomas.

As teratomas form, they have at least a tiny bit of all three kinds of developmental tissue

that embryos have.

There's the endoderm, which goes on to make your gut lining, the mesoderm, which makes

your muscles, blood vessels, and skeleton, and the ectoderm,

which makes your skin and brain.

To be clear, they are not embryos — their growth isn't nearly controlled enough.

But that developmental tissue is how hair and eyeballs

can start sprouting in these tumors.

Scientists really started digging into teratomas in the 1950s and 60s.

A team using mice to study the health hazards of cigarettes found teratomas in a mouse's

testes, then switched over to tumor research soon after.

Through careful experimentation with these tumors, biologists started to realize that

embryonic development happened in a similar way.

In embryos it was just … less broken.

Plus, they discovered that mouse embryonic stem cells implanted into the testes of healthy

adult mice could grow into teratomas too.

So really, you can pretty much trace the field of stem cell research back to teratomas.

And it's a field that could help a lot of people someday.

Normally, it's hard to donate tissues to patients that need them, because our bodies

reject foreign stuff.

That's where pluripotent stem cells come in, like embryonic stem cells.

We might be able to use them to grow tissues that can be transplanted without triggering

those defenses, which could be really useful for medicine.

But, obviously, scientists don't want to accidentally transplant tissues

that create teratomas.

Even if it turns out to be benign, finding a tooth-filled lump inside you would not be

a good surprise.

So there's a lot we have to learn before these potential therapies get close to becoming

a reality.

And on that list is why seemingly normal embryonic stem cells grow into tumors with a bunch of

body parts.

Thanks for watching this episode of SciShow!

If you want to learn about more weird things hiding in human bodies, check out our video

about the natural painkiller in your spit!

And for more of all kinds of science, you can go to youtube.com/scishow and subscribe.

For more infomation >> Teratomas: What Tumors with Teeth Can Teach Us About Stem Cells - Duration: 3:45.

-------------------------------------------

ТОП КРЮЧКОМ. РАЗБОР УЗОРА+СХЕМА+ВЫКРОЙКА || CROCHET TOP. PARSING THE PATTERN+SCHEME+PATTERN - Duration: 17:41.

For more infomation >> ТОП КРЮЧКОМ. РАЗБОР УЗОРА+СХЕМА+ВЫКРОЙКА || CROCHET TOP. PARSING THE PATTERN+SCHEME+PATTERN - Duration: 17:41.

-------------------------------------------

don't rain on my parade: what Pride means to me - Duration: 4:36.

[music]

You and I buy star maps and drive my car around Los Angeles

You and I buy star maps and ding dong ditch a televangelist

And it's only been a week But I know that you are mine to keep

You are a radar detector I drive a thousand miles an hour, I won't

go on and on But you are always looking out for me because

You are a radar detector, you are a radar detector

You are a radar detector, you are a radar detector

You are a radar detector, you are a radar detector

You are a radar detector

You are a radar detector I drive a thousand miles an hour, I won't

go on and on, and on and You are always looking out for me

[music]

Hi friends,

So I have a long history of parade participation.

I was in a dance company In middle school and high school, so every christmas and st

patrick's day and something called "good neighbor fest" in the summer I put on my

jazz pants and did kick ball changes and lindys down a deceptively long parade route, to,

like, rockin' around the christmas tree, on loop.

I don't think i ever really understood why anyone would go to a parade, just to stand

out in weather that is either too hot or too cold just to like, wave at the children of

the employees of their local bank.

However, HOWEVER.

I have had a change of heart.

I went to Brooklyn's Pride parade last weekend, it was my first one.

Even though I've been out as bi in varying degrees for about 3 years now, I was moving

around a lot and New York City pride is always the same weekend as Vidcon and it's never

worked out.

Also speaking of Vidcon I'll be there next week, let me know in comments if you will

too.

Anyway, brooklyn pride, is not the same as new york city pride.

Instead of giant corporations with big fancy floats, we got the local HVAC company, and

a scouting troop, and a whole lot of churches.

The churches definitely got me the most emotional as a lapsed catholic who grew up getting the

"hate the sin not the sinner" speech at summer camp.

Well now i've got a sticker.

Try and hate me now.

There were cheerleaders, they were cool but I think it was a missed opportunity to change

their uniforms from Cheer New York to Queer New York

Also, there were two.

TWO! seperate all femme identified drumlines.

And so many good boys.

I got a rainbow bookmark from my public library

I put on a lot of Fenty shimmer match stix on my face.

AND I got to hold hands with my girlfriend in public without doing the whole reflexive

"look both ways to gut check for homophobes" thing we all do.

And I got frozen yogurt after.

It was a really fun time.

Pride started as a protest, and that's an important part of our history to remember

and to continue.

But i think sometimes as a three sport competitor in the oppression olympics, that like sometimes

we've been through enough.

Sometimes we wanna fight for our cake and eat it too, you know?

We deserve a little innocent, corny, harmless fun.

So if you're also celebrating pride this year, tell me how in the comments.

If you liked this video, please share it with someone else you think might like it too.

If you're at Vidcon come see me—I'll be on a panel called "We're Here" about

queer and marginalized identities and I'll also be moderating a panel called Finding

Your Style & Voice.

If I don't see you there, I will still see you soon.

Bye!

[clap]

For more infomation >> don't rain on my parade: what Pride means to me - Duration: 4:36.

-------------------------------------------

Tryon honors the legacy of Nina Simone - Duration: 1:47.

For more infomation >> Tryon honors the legacy of Nina Simone - Duration: 1:47.

-------------------------------------------

OptiFiber Pro Project Management (OFP 108): By Fluke Networks - Duration: 6:14.

The OptiFiber Pro here is from Fluke Networks,

so you can expect some advanced

tools within it. One of those is

something called project management.

Let me show you what that is.

So, to create a new project

tap the project, change project,

and let's create a new one.

I'll call it "ady".

Done.

So here I can put my operator name in.

And here is my test setup,

it's auto OTDR OM3 50

and it's ANSI/TIA-568-C.

Let's go in there.

So, auto OTDR, our fiber type is correct,

and I'm happy with this test limit today,

but, more importantly, launch compensation

is currently off.

I want to put that on.

That way, my launch and tail fibers

are not part of the measurement.

Save.

Cable ID set, it's set at 001, which is great.

Now, what will happen there is that

the first ID you save it will save it

as 001, and then the next will be 002.

Well, I don't think there are too many

cabling schemes that are done like that. So,

I'm going to delete that,

and I'm going to replace it with my own.

And, since this is a patch panel,

it's going to be 1A-A01,

which is my first ID that I'm testing.

And the last ID that I'm going to get

the technician to test to today is B24.

Done.

I also want the technician to test

both ends 1 and end 2.

I can review that.

And I can scroll down the list here.

And you'll notice that once you get to A24

it jumps to B01, so it speeds up the process.

Otherwise, that A24 would go to A25

and then the tech would have to go back

delete the A24, but I think you get the point.

By doing this, it resolves one of the

biggest issues that we see where the tech

is using the wrong cable ID scheme.

So, we'll hit save.

Everything looks good here. I think we're done.

So, here's our project "ady",

our auto OTDR is set up,

our next ID: 1A-A01. Let's hit the test key.

Okay. And we know our launch compensation's

been applied because here and here

it's greyed out. So, next ID.

It says A01 so going to hit save.

Here's my list that I created.

I can jump around the list if I want,

but I'm starting with A01

so I'm going to hit the save key.

If I touch the home screen now,

you'll notice that I've got the "1"

and it says 1% is tested.

So, let's run another test.

And for a Multimode link, as you can see,

expect about 12 seconds for an auto test

unless there's something wrong with the link.

My next ID, A02, that's what

it's going to save it as, so, save.

I can't get to A01 now, because it's been

done already, and it's jumping to A02.

So I hit save.

And again, if I go to the home screen,

I can see two tests are done

and 2% is what's been tested so far.

So let me see if I can actually create a fault.

Let's run a test.

Yeah, that doesn't look too good.

That's not the kind of thing

you normally see with an OTDR trace.

And it's going to give me a warning.

So, it's failed.

I've got two options; I can either fix this

link now and then hit test again,

or I can just keep testing,

which is what I'm going to do.

So I'm going to hit fix later.

It's going to save it as 03,

and then I'm going to go on to my

next link to test.

And it passed. So I hit the save key.

Save it.

And if I look at my home scree now,

I got three passes and one fail.

So, let's say we got to the end of this list

and we got to 100%.

How do we deal with that failing one?

Well, this is where that project feature comes in.

Instead of downloading all your results

to a PC, looking through the linkWare

file to see which one's failed,

go back to the link that failed,

fix it, and then tap results.

You'll see the passing ones

and the failing ones here that

need to be retested.

Now that I fixed it,

I'm going to tap test again.

and it looks a lot better this time.

And it passed so hit save.

Save again.

It's going to warn me "do I want to

overwrite that failing test result?"

Well, I think so, yes.

And now, when I go to the home screen,

I see that I only have passing test results.

And that is the project management feature.

And where did this feature come from?

It came from you, the installer.

You asked us to have some kind of

management feature in here that would

allow you to deal with the passing of

failing results in the field

without the use of a PC.

For more infomation >> OptiFiber Pro Project Management (OFP 108): By Fluke Networks - Duration: 6:14.

-------------------------------------------

A local's guide to the best things to do in Edmonton (while on wheels) - Duration: 1:57.

my name is Glenda Wang and I'm a local blogger I'm gonna be taking you on a

tour of Evans beautiful River Valley and historic Old Strathcona but for this

tour we're gonna be going just on wheels let's ride

urban pedal tours is fun 15-passenger great bike set em Antonio San Jose hop

on this giant bike and pedal their way driven to the top Korean restaurants

it's pretty unique and fun way to explore Old Strathcona it really turns

heads when people see you coming down on a giant bike business run so ultra Kona

is one of Evanston's best neighborhoods I have the kind of funky atmosphere

funky vibe and it's just happy with great local shops restaurants bars great

nightlife

telling people that you know if you're visiting Edmonton you have to go to Old

Strathcona so we're here at the River Valley

adventure company and we're gonna be hopping on a Segway and then hitting the

trails on mountain bikes as well forward oh just a lot of fun great way

to explore the River Valley and it's actually not that hard to figure out so

I love pop them on the Segway you can go to a lot of places but you wouldn't

necessarily be able to find or or easily get to just walking and certainly not if

you were driving something that people don't realize is that Edmonton River

Valley is actually the largest urban parkland in North America so lots of

trails lots of parks I love taking my dogs to the dog park

all kinds of activities you can jog it cycle you can just have a picnic you can

hop on a Segway and go into some pretty cool areas and just be so much of

Edmonton and old Trek on a neighborhood vibrant culture when you're traveling

around on wheels

For more infomation >> A local's guide to the best things to do in Edmonton (while on wheels) - Duration: 1:57.

-------------------------------------------

Québec. Jamais pareille avec Les Fêtes de la Nouvelle-France 30s - Duration: 0:31.

For more infomation >> Québec. Jamais pareille avec Les Fêtes de la Nouvelle-France 30s - Duration: 0:31.

-------------------------------------------

OptiFiber Pro test limits (OFP 104): By Fluke Networks - Duration: 3:20.

If you're not careful about the test limit

you select on your OptiFiber Pro

you may find yourself passing fiber links

that you would not like to pass.

So, in this video I'm going to talk about

the various tests limit options

in the OptiFiber Pro.

So let's start by running a test.

My OptiFiber Pro is set up to the

TIA-568-C standard.

So let's run an auto test.

Here I see my traditional OTDR graph.

And here is the OptiFiber Pro event map.

And we can see that we have "pass"

in the right-hand corner so everything's good.

Our loss is 0.17 dB

and our reflectance is -29.25 dB.

But hold on one moment.

You need to be careful here.

The 568-C standard does not currently specify

reflectance as part of your test limit.

So you will never fail on reflectance.

This reflectance could be all the way

down to -15 dB and it still would not fail.

At -29.25, when we look at the trace,

particularly at 1300,

that we see that we have

a very large spike here,

indicative of reflectance.

There are many OTDR folks out there who

would look at this and go "I'm not going

to accept that, that's too much reflectance."

Yet, why did your tester come up

with a pass? Well, again, our test limit

selected is TIA, and it doesn't

have a reflectance limit in there.

So what we've done in the OptiFiber Pro

and in our other testers,

is we've created a couple other

test limits for you to use.

So I'm going to go and change

the test limit here.

And I'm going to go and select something

called general fiber RL -35.

That's going to have the same

values as that TIA test,

except we're now going to

set a limit for reflectance

and that's going to be -35 dB.

So let's run the test again.

This time with a reflectance limit.

And lo and behold, it failed. Why?

Because our reflectance is not good enough

according to this test limit that we selected.

So, if you are going to be doing OTDR testing,

please make sure you talk to the person

specifying the cabling system.

And ensure that a reflectance limit

has been agreed upon.

If you're doing field polishing -30

is about as good as you're going to get.

You could get over -30

but it's going to be a struggle.

To get to -35 dB

you're going to want be using

mechanical connectors.

These are the ones that have been

pre-polished in the factory,

or pigtail and fusion splice.

But with field polishing

you are going to struggle

to get to that desirable -35 dB.

Không có nhận xét nào:

Đăng nhận xét