Will It Slime? Slime Kit Test #690 - Satisfying Slime ASMR
-------------------------------------------
Crushed Ice - Präsidentensuite - (Official Rap Video) - Duration: 2:22.Ey
I fly over sample beats
Ey
I play in the Champions League
Ey
Piano melodies
To the presidential suite
Ey
The music becomes effective
Ey Ey
You are a whack MC
Ey
I earn a lot of money
To the presidential suite
Ey
I fly over sample beats
Ey
I play in the Champions League
Ey
Piano melodies
To the presidential suite
Ey
The music becomes effective
Ey Ey
You are a whack MC
Ey
I earn a lot of money
To the presidential suite
Ah Yeah
It is Crushed Ice
Ok
Ah Yeah
Ah, what's up?
It is Crushed
People carry dumbbells
I am completely different
I only wear my bathrobe
When I'm stressed you can see me
Pressing the piano keys
But there is no reason to worry
My rap will fill concert halls in the future
I walk past without shaking a hand
Even if I look unsympathetic
It is below my dignity
I'll bring your best lines out of fun
In unbelievable shortness
And to say you should rap
Is a badly meant advice
Ah
Ey
I fly over sample beats
Ey
I play in the Champions League
Ey
Piano melodies
To the presidential suite
Ey
The music becomes effective
Ey Ey
You are a whack MC
Ey
I earn a lot of money
To the presidential suite
Ey
I fly over sample beats
Ey
I play in the Champions League
Ey
Piano melodies
To the presidential suite
Ey
The music becomes effective
Ey Ey
You are a whack MC
Ey
I earn a lot of money
To the presidential suite
Yeah my passion
Is rap music and flow
I'm outstanding in that
As if I were the boss of a spy
I'm only 1.60 tall
The suite is 160 meters in the air
And you look jealous
Because I'm balling like Caesar
Yeah
I create sample beats
On my chesterfield couch
Make the rap music louder
Like an Like an
MLG sound
You have to be quiet
When the emperor speaks
I'm off the hook
Okay I do not deny that
-------------------------------------------
Glamour metál akrilfestékek // Glamour Metallic acrylic paint - Duration: 2:54.GLAMOUR METAL ACRYLIC PAINTS
They are shiny acrylic paints that are sparkling depending on the light
They are available in four golden and four silver shades:
reddish gold...
rich gold...
antique gold...
greenish gold...
antique silver...
platinum...
dark silver...
and black silver
Take a primer-coated wooden candlestick and paint it by dark silver Glamour metallic acrylic paint
After the first layer has dried...
apply a second layer so it covers perfectly
The convex surfaces will reflect the light in various shades
You can enhance the color of Glamour metallic acrylic paint by using a similar color acrylic paint as a primer
We applied salmon-color matte acrylic paint here under the reddish gold color
One layer of Glamour paint is enough on this primer coating
You can use olive primer under the greenish gold color to enhance the greenish shades
You can also use these paints even on plastic surfaces
Apply antique gold color Glamour metallic acrylic paint by a sponge brush to the separator plate of an acrylic heart shape
Paint the inside of the heart by black silver color
After the paint has dried, apply a second layer of both colors
Turn the part upside down and continue painting the other side. Attach the metal medal by Heavy Body Gel
Insert the separator plate to its place...
then glue a silver cord to the rim inside the heart
The iridescent sparkling of Glamour paint shows nicely through the clear acrylic material
The Glamour paints coat glass surfaces very well; they are excellent for satinage due to their translucent shades
Tap the platinum color to the surface in a thin, even layer...
by a sponge brush to the bottle
The surface will sparkle with beautiful silver shades, with frosty effect
The decorated glass surface is not perfectly scratch-resistant...
so use this technique mainly for knick-knacks
-------------------------------------------
Best Landscapes of 2018 + Deleted Scene - Duration: 18:37.yeah I know my best images of 2018 all in one video you can barely contain your
excitement
but before I start with that I just want to thank a few people that have made
2018 such a good year especially for my youtube channel and the first person I
want to thank is Thomas Heaton because Tom gave my channel a huge boost
we met in Moab in Utah just a few months ago and we went a couple of shoots
together hit it off and when I got back I posted a bunch of videos and Tom was
kind enough to share those for me and that exposed my videos to a whole new
audience and really gained a bit of traction so thanks a lot Tom you've
really helped me get some momentum on the channel next up I want to thank Adam
Gibbs for his patience and putting up with my ridiculous ideas on these videos
that we've been doing we've we've made quite a few videos in the last few
months and hopefully we'll be making a lot more we're having a blast doing
these videos but who knew that the Adam was so funny I think he must have been a
thespian in a former life because he he takes really well to doing character
roles and he seems to just accept any ridiculous idea that I gave him so
thanks a lot Adam. Hope we can do some more of that in 2019 I also want to
thank Brent Henderson for getting me out of my photography funk that I was in at
the beginning of this year I just really wasn't in the mood to go out and suffer
and get out in the cold and the wind and the rain and the wet and Brent flew up
to the island and he dragged me off all over the place and said no we're gonna
go shoot this and we're gonna go and shoot that and it kind of rekindled my
excitement for photography and you've probably been through this yourself
where you go through a bit of a low point with it and you think I'm sick of
chasing it and that rekindled my excitement so thanks a lot Brent so
before I get into my best of 2018 I just want to show you this deleted scene that
I took out of that Payzant Creek video and if you watch that video to the to
the very end you'll remember a scene where Adam made a comment which made me
spew my beer all over the lens great thank you thanks for coming out I
had a brilliant day today. Even though you sh*t yer self? and it you'll
probably wondered what what was he referring to well now that you see this
deleted scene it'll start to make sense to you
where is he?
oh there you are! I've been looking for you Gavin where you been?
well....
You know that fart that I did?
Yeah?
Wasn't a fart
I've err.......
I've sh*t me self....
Oh god!
Have you er... av got some bogroll?
No. What's bogroll?
You know 'sh*t tickets'?
Err.............................no.
What about Kleenex or even a lens wipe?
Hang on.
Well I got this.......
I'll have it. I'll have that.
Well hang on a minute this is my lens cloth..
come on let's have it!
Well it cost me at least....I dunno... $15....$20 bucks!
Cor fekk off! Come on I'm desperate man!
I'm sorry but if you wanna wipe your arse, you're gonna have to pay me $15, $20 bucks for this!
$15 for crappy lens wipe??
all right $10!
Ok, tell you what. I'll give you $5 and I'll wash it for you and give it you back?
Alright. And burger and beer too!
Burger and beer yeah!
THANK YOU!!!!!
was that a bit too much so now that I've gone and blown all of my artistic
credibility and any chance you thought of me being a photography professional
let me try and redeem myself by showing you my best images of 2018 so number one
what is number one number one the fairy tree at fairy Lake this this kinda means
a lot to me because like I explained earlier this is the first shot 2018 I've
been chasing this shot for a few years and I've got some pretty decent ones but
I've never got a blue our shot and whenever you go there you always get
different conditions the the water level is different but this day we got there
this is the first shot that took of this year Brent dragged me all the way out to
the west coast to get it and we stuck around for blue hour that the water was
flat calm and then this mist started to roll in just as it was turning into blue
hour and I got that perfect reflection I got the mist coming all along in the
distance so yeah this was my very first shot 2018 and it really means something
to me so I hope you enjoy that one number two drainpipe Falls it's
difficult to take a bad picture of this place it's so easy to get
picture and this was a second day that Brent took me out and this was the first
vlog of 2018 so it was kind of like a the video that kick-started this channel
for this year and we hiked into the canyon and the conditions were
absolutely perfect the water floor was ideal
we had gorgeous texture and we had lovely color in the mosque so yeah this
was a really sweet shot to get even though I've been shooting this place for
years finally I got the ideal conditions number three the third cascade at
Stocking Creek here on Vancouver Island this was the month of light race think
this was this was April May sometime and it was that it was that month where
there was loads of Sun but the water levels were still high enough that they
were creating lots of spray and when they when the water hits the ground and
then the Sun would hit that and light it up and give you these beautiful light
rays so that's why I called it the third cascade because it kind of looks like
there's two cascades of water and then the third one made entirely of light so
this was a quite a lovely shot but again I've been there many many times never
got anything quite as special as this so I was very happy to get this one
number four roots and rays this is another it's one of those moments where
it's the very first time I ever went there so thanks to Tanya for showing me
this spot I just showed up and literally within five minutes of showing up I
spotted this composition with these gorgeous roots in the foreground and
then the Sun poked through the trees and lit the spray that was coming up off of
the waterfall to create these gorgeous light rays by the way I've just released
a new photography course how to photograph waterfalls you're gonna get
three hours of HD video tutorials that are start to finish and you also get 10
bonus content videos access to a closed Facebook group and one personalised
image critique nice number 5 Pacific light at botanical beach on the west
coast this was one of those shots to just cut me all of a quiver you've
probably experienced this way you walk into a scene and at first you don't
really see anything turn around and you look behind you and
that's it I was like shaking I was so excited these light rays the Sun was
just blasting in because it was a bright sunny day and it was hitting the spray
that was coming off of the waves and the spray wafts into the trees and then the
light hit it at that exact moment and it was moving so fast that I was kind of
literally chasing these light rays as they receded back along the trail and I
was kind of really panicked that was going to miss it and all I had on was an
18 millimeter Prime I didn't have time to change and switch to a zoom so it's
kind of like panic mode but I managed to get the shot in the end it wasn't quite
exactly what I would have composed had I had a zoom lens and a bit more time but
when you get the best conditions you usually don't have time so yeah this was
a this was a pretty sweet shot that I'm still very happy with number 6 caramel
swirl the Cumberland potholes again here on the island and I've been at this
place so many times and only that one time the day that I got this shot did I
get the ideal water level so I think it must be fed from a reservoir or
something it must be some runoff from somewhere because you either you go
there and it's either blasting and you can't even see anything like it was the
last time that Adam and I was there about a month ago or it's just hardly
anything and it's completely born dry and the solar so to get it perfect like
this I was overjoyed and and what I love about this location is it kind of looks
like somewhere out of Western Australia it doesn't look like Vancouver Island
you know it's sort these colors and those lovely brown rusty caramel tones
are absolutely gorgeous and then with a little bit of water that's cascading
through or very juicy number 7 molar fossa waterfall in the Faroe Islands oh
my god at this day you don't get like like this very often and for me to get
this on my second visit to this waterfall well to say that I needed this
moment I needed this light is an understatement because it was like all
my Christmases birthdays came all at once I was shooting for literally an
hour I think I must have shot 200 frames just constantly because the light kept
changing it was doing all of these amazing pyrotechnics in the sky and to
get a shot like that on your second visit
that was that was pretty sweet and I've got to thank Warren my friend and client
Warren for dragging me there and showing me all around the islands it was a real
pleasure to to go there with someone who knew where to go and showed me how I get
all the best shots even though I was supposed to be helping him get the best
shots and he wasn't too pleased when I got that shot about two hours after he
left and gone home sorry mate did I mention that I'm doing a workshop
in Mir in the Faroe Islands sure I mentioned that at some point but if you
didn't know I've got two spots left on that workshop head over to phototrophic
arm I'll put a link there be sure to check that out because it's gonna be
magnificent number eight - triple Moonglow a triple peak here on Vancouver
Island this is my absolute favorite shot of 2018 primarily because it's gorgeous
I like the look of it but it was very hard Warner I suffered so badly to get
this shot well we all suffered because the whole bunch of us went up there on
two occasions and on the third occasion that's when I got this shot I got over
300 mosquito bites I mean look it looked like I'd been buckshot only some kind of
explosion it was terrible but it was totally worth it because at the perfect
moment of getting the stars all focused and getting my composition right with my
friend Kathryn who kindly sat in this shot and sat perfectly still for 30
seconds just as I got everything lined up perfectly the moon popped on in the
east just a little sliver of a moon I'd say like a quarter of a moon and just
let the scene from the side so if you look at the peaks there it's got this
gorgeous moon glow to it this lovely blue hue which I kind of love that I
just totally love that type of light while I decided it was a little bit too
cold and noisy out on the streets of Lady Smith who knew that lady Smith
would be so busy on Boxing Day night it was like bloody Times Square anyway I've
come home where it's marginally warmer and I've got this bit of Christmas cheer
I've got golden honey ale by the local Wolf's Brewing Company and no they don't
pay me to say that and I don't even get free beer but anyway let's enjoy a nice
bit of Christmas cheer Cheers yes I am drinking beer out of a
wineglass you'll get over it sorry it's not be a it's it's Shandy
yeah no alcohol number nine dragon year the
Faroe Islands I've had many many stupid moments in photography moments where
I've risked my life just for a picture and this was a pretty stupid moment so I
hiked all the way out there and I got right down to the level of the water to
get my composition I composed this gorgeous shot I was loving the shot but
then I had second thoughts after the sixth wave almost took me out into the
ocean I have water up to my knees and my camera was going over so then I moved
the camera up six feet to this spot that you see now and that was almost as good
a composition but at least I lived to tell that tale I think what I love about
dragon ear is just the sheer drama of a place like that and it's kind of like
Scotland in some respects where even on a crappy horrible gray day where you
think you wouldn't get a picture you actually can get a spectacularly
dramatic intense image such is the power of that landscape now did I mention that
I'm doing a workshop in the fat yeah I mentioned the animal I just thought I'd
ask us you don't seem to have booked it yet what's next our number 10 the
Sentinels San Joseph Bay right here on Vancouver Island I've been dreaming
about this shot for years and I kind of had a feeling that the Milky Way would
just line up perfectly with those gorgeous vertical sea stacks on the
beach but I never quite managed to get my timing right and get out there on
those few days of the year where the conditions are gonna make that shot
possible but brent was over on the island because we were supposed to be
traveling to Baffin Island anyway that trip got canceled at the last minute and
so we were scrambling around for somewhere to go and Brent had never been
up there I'd never seen these sea stacks and they are just epic hmm number 11 a
spur or the LaSalle mountains in Utah and
again I've got to thank Thomas Heaton for this shot because it was his idea to
go out there with a whole bunch of instructors from this conference that we
were at so off we went a whole gang of us we had an absolutely brilliant day so
I love this shot because of the shot itself has got that gorgeous contrast in
the clouds that mountain peak looks really impressive and of course the way
that the Sun is hitting those Aspen's and making them glow in certain parts of
the shot and then of course I love the shot because it's a fun reminder of a
really fun day out with really good people and lots of laughs were had
number 12 thus opening the Crystal mill in Colorado this shot has a great story
and an entire vlog dedicated to how I got that shot and the huge journey and
the planning and the effort but suffice it to say I mean I'll put a link there
you can watch that but suffice it to say it was thousands of miles of driving I
had to hike through thunder and lightning and rain I got completely
soaked and drenched and I couldn't have been happier struggling against all odds
to get a shot and then you do get that shot you know you have to suffer a
little bit for your art and when it all comes through it's it's so worth it for
me it's that brief moment in time where there was just a little gap and then the
Sun put through lit up those rocks and created this gorgeous contrast and I
love how contrasted the clouds are the beautiful aspen trees and of course that
that structure is so impressive so yeah that was definitely worth the drive
definitely worth the hike and I think if there's ever a shot that defines my
style of photography and my style of processing the so cunning at the crystal
mill is the shot number 13 water sprite Lake moonrise so this is a shot that
again I'd planned on getting this quite a long time ago and for whatever reason
I could never quite make it out there anyway we finally made it out there in
October a whole bunch of us went out there and I wanted to capture the moon
as it rose just above the peaks there but on the first night I totally messed
it up I thought everything was good my composition was great the light was
great but somehow I'd nudged the the focus wheel and hadn't realized it was
out of focus so you know with the moonrise you've only got a certain
amount of time and then it's over right but I messed it up I thought all my
exposures were good and when I checked them afterwards they were all blurred
but luckily I had a second go at this the next night and it turned out better
because the moon was a little bit lower down on the ridge and I thought it was a
slightly more pleasing composition and this time I made sure not to mess up my
focus and that's my top tip in all of your photography adventures the only
thing that you can truly truly mess up with no chance of recovery its focus
it's time for some red stuff now that just grape juice non-alcoholic number 14
lit from within this is another one of those shots that have been after for
quite some time I've been going to the Butchart Gardens year after year trying
to time it just right so that are getting that bounce light that the Sun
that comes down hits the pond bounces up and lights that tree from underneath
well finally this time this year I got it and I made an entire vlog episode
dedicated to this day and it just kind of goes to show that with a bit of
perseverance if you keep trying they keep plugging away at a shot you will
eventually get the perfect conditions and I like this shot because I feel like
you could just walk straight into this composition straight onto that little
pathway and become part of the scene number 15 the last one on the edge the
Faroe Islands my image of the cliffs and lighthouse at the dramatic location of
calcite in the Faroe Islands what an absolutely fantastic place this is I
think the word epic is completely overused in landscape photography but I
think that the word epic was created specifically for this scene in the Faroe
Islands if you don't like the weather you've only got to wait 5 10 15 minutes
and it will change dramatically so one minute you can have a dingy gray day
with miserable rain clouds and within 15 minutes it's blue skies and you're
wondering where did all the clouds go so there you go those are my
best images of 2018 I hope you enjoyed looking at them as much as I enjoyed
creating them it's been a fantastic year with so many adventures and I can't wait
to see what 2019 holds oh and please post a comment let me know which of
these images you like best and why you like those images best and last but not
least I want to say a big thank you to you because it's the subscribers the
people that like the people that comment that really make this all worthwhile and
I love the comments because they help me to create better content so let me know
what you like and if I like to create it then I'm gonna create it and Gavin
Hardcastle from photo triple comm Merry Christmas and a Happy New Year
thanks for watching bye bye juicy
-------------------------------------------
Apply UK Farm Worker Visa Online for Sponsorship 2019 - Duration: 7:45.LIKE | SHARE | SUBSCRIBE
LIKE | SHARE | SUBSCRIBE
LIKE | SHARE | SUBSCRIBE
-------------------------------------------
A YEAR IN YORK | VLOG 17 - Home - Duration: 3:00.It's been an amazing Christmas eve.
I've enjoyed it a ton.
Tomorrow is my last day here, then I'm going home.
Really looking forward to seeing people again.
My friend dropped a Christmas music video yesterday. Link in description.
Leaving tomorrow morning.
We're having a last movie night.
Making some food.
We'll have to enjoy the last night.
Finally home.
Now I get to open my gifts.
Isn't there any more lights?
-------------------------------------------
GALACTUS & Adam Warlock & To APPEAR In AVENGERS ENDGAME REVEAL! The Next Big MCU Villain Is COMING! - Duration: 14:04.why did you do
what is good YouTube warstu here it's been a very strange week for Marvel this
week if I'm honest no spider-man far from home trailer still even though
everyone already has to trade a description for everything that's gonna
happen in that trailer and to be honest guys it is spoiling the movie and
trailer for everyone so it's still holiday here in England so happy
holidays so Kevin Feige spoke about how the x-men
will be introduced into the Marvel Cinematic Universe obviously we've been
covering it for months about how the Disney Fox deal is very close to closing
and it could be closed by the end of January in the main countries but it's
gotta close in every single country they've all agreed to it so the Russos
kind of had some new details to say about avengers endgame but really as
soon as they lied about the title for the movie you've literally gotta take
everything they say with a pinch of salt so now let's get into it so the
competition stuff will be at the end of the video but first make sure to
subscribe so the Russos had some very interesting comments to say to Empire
Magazine when the pair well asked how they plan to meet expectations set by
the phenomenal popular infinity war super honest guys infinity war isn't
even that epic of a movie to go back and re-watch it no I'm not hated I'm just
critiquing it it could have been a lot better realistically your applied with a
lot of hard work before observing the end game pivotal placement in the MT you
will be enough in itself to give the same emotional hang whether we top
infinity war or not I don't know he continues but we tried to tell the best
story we can with the characters this is bring a close to the first decade of
stories and I think now alone has a dramatic power to it so let me get this
straight guys we have two directors off the movies telling us that Avengers 4
can't be bad at Avengers 3 Wow I mean you're supposed to be selling your
product very well I mean are they trying to I guess troll is again saying they've
got no idea it's just a bit of that they are saying we don't know if we can match
a vendor 3 well Avengers 3 wasn't even that epic realistically half the
universe was dusted but you know half the universe is gonna come back in
Avengers 4 anyway presumably the filmmakers don't intend
to let the importance of endgame do all the work for them in keeping viewers
invested but in typical Russo brothers fashion the germane the tight-lipped
about development in store saying we've sat on the title yeah you saw the title
was so long I said the title was never been said anywhere before the title was
so traumatic you would literally figure out the whole movie from the title
saying this end game and we have broke down as a key what endgame means it's
Doctor Strange setting everything up including having the decimation happen
when ant-man was already inside the quantum realm we sat on the trailer the
last thing you want to do is give any clues to the story structure or tone so
the last thing they said I've already done a video by this by one is cover
again is a very interesting topic as for Thanos he is literally hung the uniform
he succeeded in the thing he set out to do he's done he did it he retired Joe
Russo said wait wha wait wait what hang on a minute wait wait wait whoa did they
just so hang on a minute wait no no I'm confused a bit hang on
just wait he just said that fair not retired right yet in the Avengers
endgame artwork we now officially have fast wearing the Infinity armor okay
let's call it effing armor it's probably just wore armor I guess you could say
and that the blade what I'm calling Infinity Blade so he's retired but with
seiderman artwork and he's got the full armor and if any blade but Joe Russo
just said he's retired Wow Wow Wow he's retired yeah an artwork
but he's the same week as his interview came out from Empire magazine we see
phallus in armor we see him in new images in new artwork granted his
artwork is pretty bad to be honest it's not very good I mean I think ultra 26
who's a pretty awesome Instagram hires who did my banner fight channel could do
better work than this in fact he does do better work than this
I'll leave his link down below in description box but Wow they literally
just said he's retired then at the end of the
his endgame he's gonna retire at the end of this movie obviously but at the end
of Avengers infinity war Thanos will return in Avengers 4 so Thanos was in
the first Avengers endgame trailer but wait wait wait what didn't they just say
he's retired so are they misleading you in the sense we see retiring on the farm
getting the Scarecrow where Thanos hangs his clothes up on his scarecrow just
like in the comics right so that was after the comics whether that storyline
ended in the comics but wait he just said that phallus is retired so hang on
if phallus is retired then who's gonna be the villain for the next movie
seriously yeah are they gonna have to build up a complete new villain for the
next movie I'm a bit confused because obviously it's Avengers infinity War
part 1 and part 2 regard it through what anyone says it's a two-part movie yes
they're self-contained stories yes half the universe is being snapped so if the
villain isn't phallus we're gonna have to think about some other people so we
know that the Fox does he deal will be done at the end of January and yes there
has been so many secret deals than Hollywood originally fans feared that
they're below the Captain America in infinity war would be gone but it seemed
like at least Evans expanded his contract Marvel to include Avengers for
the actor had initiative fear of joining MCU
but he grew to love playing the character the hero he could have stopped
after the third movie if he wanted to well he did finish his original contract
obligation he felt like he needed to extend it he said the film in infinity
war and Avengers 4 just wrapped everything up nicely it's what made the
most sense for all of these characters apparently fans we just have to wait and
see what actually happens in what he means by this so essentially this was a
deal that's done there's been no end of people in the MCU doing secret deals why
am I talking about this so Avengers infinity will mostly follows
the infinity war and the affinity gauntlets story arc in the comics but
where I'm actually going with this is there could have been secret deals
through other villains and just like actors have to secretly sign contracts
so the only reason we're gonna go over some of their ideas is because one of
the directors has literally said phallus has retired he's not even in the movie
even though he's in the first trailer he's in that the end of infinity war he
will return in Avengers 4 he's in the new promo but apparently fast won't be
in the movie now any of these characters analyst on below could actually appear
in a movie easily they could explore them with a negative realm or the
quantum realm or the negative zone I guess they want to call it the actual
quantum realm inside this movie so the first one would be a nine assists
if Marvel are really going to go with the quantum realm instead the next
design easily they could set this character up easily within the negative
zone and ice has used the rod to harness and amplify the energy of the antimatter
universe in order to rule it the cosmic rod also allows the holder to
slow aging process manipulating matter energy in Marvel Comics and Isis has
used the weapon to boost his own strength fly through space and fire
immensely powerful energy blasts so that's that's one possibility I mean
when everyone thought the title was annihilation but apparently the title
was never annihilated it was chained and there was a big conspiracy theory going
around the internet that I was gonna be a dilation and then it turned out to be
endgame you see where I'm going with this
so another character is Adam warlock Adam warlock has been associated with
Marvel for so long since we got the post-credits scene in
Gaza galaxy 2 when we literally seen Adam warlocks cocoon so it makes the
most sense he was part of the Infinity Gauntlet storyline in the soulstone he
he was so pinnacle yet during the QA the recent one about the Avengers infinity
war that the Rizzo's held in LA yeah it basically said that they couldn't work
him in so potentially that he could be in it potentially he might not be in it
but either way he's gonna have to show up in guard as a galaxy 3 I guess you
could say so Galactus as the Most Wanted most loved villain to come to the MTU
for years everyone has wanted Galactus to appear in this movie from people
saying Galactus was the Power Stone some people saying that Galactus was the last
Easter egg but Jane's gonna confirm this was incorrect Galactus presents an
interesting problem that could easily take an entire array of Marvel
characters to solve with the Disney buy-in Fox properties like we've said
before including the Fantastic Four this could be an incredible
way to introduce the richest family into an already established MCU additionally
since every Fantastic Four movie made by Fox was an absolute flop it just seems
awesome to put blacks in here the world eater glad this is the infamous devourer
world in the Marvel Universe his powers are nearly on the potent is
just absolute beast power cosmic person he uses energy from the core of planets
Universal sources to sustain himself he has currently been changed into the
light bringer who restores a life to planets Galactus has destroyed Galactus
would destroy fast easily in the comics Galactus has fast begging him not to
kill him I mean it's quite funny because in the Marvel Cinematic Universe
people make out fallacies so powerful when realistically Squirrel Girl has
Pete and Thanos now the other one that was floating around joinings kind of
leaked was Kang the Conqueror now I think it makes perfect sense because he
is to do with time travel in the Avengers number a a very interested
entry point for this villain would be with the time so I'm playing a pivotal
role in infinity war and a strong possibility of time travel in Avengers 4
with the bath technology there's no reason why Kang it couldn't be in
Avengers 4 endgame if there is a true time travel
I'm still thinking it's multiverse child trouble if time travel is really
involved it would make so much sense for him to appear Kang is more than a worthy
adversary for any Marvel heroes including the Avengers not only because
of his expert use of time travel but also his collection of weapons armor
fighting knowledge from the future all available instantaneously so guys
like I said this probably won't happen but seeing as the directors want to be
coy saying fat ass has retired when we know he hasn't retired we've got to talk
about other possibilities of what could really happen now we did have the
Avengers reshoots obviously the Avengers and game resuits
quite recently so I'm predicting they have changed a lot of pivotal points for
the story but we're not actually gonna know they've done this they have changed
a lot of the story I mean now they know the Fox deal is gonna go through
realistic there could be a secret deal and I always get comments saying no no
no secret deal well Brad Pitt's the Vanisher characters are really added
into Deadpool two weeks before so they could easily add a post-credits scene a
teaser the best place would be to set up a Galactus teaser somewhere in the movie
we don't have to be a case of Galactus versus Tyler school because that would
be ridiculous having Kang versus Dan offs they don't have to be taken on fast
there has to be another threat has to arrive because it's gonna be a hell
along the time before we get another Avengers movie there's nothing slated so
realistically they're gonna have two sets linked up we know they're going
more cosmic even Kevin Feige is freely talking about x-men saying we haven't
got a plan we can start talking about in the first six months of next year and
realistically you know they've had unofficial discussions about what's
gonna happen with Deadpool I mean they're even under the pg-13 Deadpool to
kind of and I guess scout out to see if anyone's gonna watch a pg-13 Deadpool
which for me didn't really work at all I know it just leaves Deadpool 15 please
so we know they will be introduced at some point so for the good way stuff I
am giving away a blu-ray for either Avengers infinity war Deadpool 2 vadym
if you live in the countries where it's out or a man and wasp all you got to do
is comment down below who is your favorite villain actually no Skylar who
do you want to be in Avengers 4 if there was no if Marvel earned every single
villain who would you want the next villain to be Twp the best one I will
pick on tomorrow's winner and obviously announced a obviously who haven't won
the blu-ray for tomorrow so I do have the Hasbro Infinity Gauntlet for my
50000 Scrabble giveaway all you'll do is follow me on Twitter at most you and let
me know you follow me I'll be announcing that winner on New Year's Eve so guys
this video it's just saying what if what if this could happen secret deals happen
all the time literally most of the Marvel Cinematic Universe characters
have had secret deals that no one knew about that what they were doing as
mainly actors and movie contracts details are kept quite tight lip so if
there was to be one of these characters of Galactus or Kang the Conqueror or
Adam warlock or someone like could actually easily a prayer it wouldn't
even be a biggie so guys let me know go with all your conspiracy theories down
below as we know some us will be back he will be the main villain first movie
regardless to what the Russo said he's in the new promotion for the artwork so
come on guys we know he's gonna have the full armor we know he's gonna have the
Infinity Gauntlet we know he's gonna have it in some capacity obviously is
still stuck to his hand so guys I let me know in the comments down below what do
you think let me know everything you think down below and if you do want to
work with me just email me war shoe business at gmail.com or send me a
message on DM on instagram i'm trying to grow my Instagram so if you could follow
me and come out would you that would be amazing anyway guys you've been awesome
and I will catch you in that next video very soon catch ya later
-------------------------------------------
Стрим по аватариї - Duration: 1:43:53.-------------------------------------------
Tecware Phantom RGB Mechanical Keyboard - Unboxing & Review - Duration: 9:29.I always love me some good solid budget mechanical keyboards, as mechs are expensive.
And I believe that these should get as much attention as the others, because they're
a real viable option for a lot of people.
This one in particular is probably one of the cheapest mechs you can get locally in
Australia, so yeh, keep that in mind.
Thanks to Mwave.com.au for providing this keyboard for review, and for their continued
support.
Opening up the box, we have a quick start guide.
We then have 4 extra keyswitches, which tells us that this is hotswappable.
And then the keyboard itself.
And first impressions in the hands is great.
It's packing some solid weight, coming in at about 950g, so just under a kilo.
And there's minimal flex feeling quite solid and rigid.
And that's because that it has a steel mounting plate.
Normally, if you were to have a floating key design such as this, which exposes the keyswitches
from the side, we would have an aluminium plate instead, which is a very common trait
of many budget mechs.
The steel has this smooth dark grey finish which doesn't pick up fingerprints, and
I personally really like it.
The rest of the case is made from plastic, with a slightly aggressive design that won't
be for everyone.
But the top stays relatively clean, with minimal branding as well.
On the bottom we have a couple of flat rubber feet, as well as two flip are feet that are
rubber tipped to keep it steady on the desk.
Unfortunately we have a non removable USB cable, so that's annoying.
But it does have cable routing channels,and also has a strap and an attached cap.
And finally a plastic ring keycap puller on the bottom which is pretty cool.
And it sits in there quite nicely, so it shouldn't fall out.
The keycaps actually look pretty decent for backlit keycaps.
The font or typeface itself is quite clean, but they are thickish and have some gaps and
whatnot, but they're not the worst.
And they have a nice matte look to them as well, being slightly textured.
They're made from pretty thin 1mm ABS plastic, but they are doubleshot, so the legends are
another piece of plastic and will never fade away.
The Phantom does have a completely standard ANSI layout though, so replacing the keycaps
is super easy.
The Phantom comes in both tenkeyless and full sized form factors.
So if you really need a numpad, then grab the full sized one.
But honestly, the TKL is a great size which gives us more space on our desk for a mouse,
and is just more comfortable to use.
Being a budget board, it's pretty cool to have legit RGB backlighting.
One thing that you have to remember about RGB lighting is that it doesn't need to
be always blazing all the different colours.
In my eyes, it gives you the flexibility to choose what colour you want your backlighting
to be.
So by pressing FN and this RGB key we can actually choose what colour we want.
So if you just want a simple white, then you can choose that.
Or if you want pink, you can do that as well.
And then of course we have all the other effects and patterns and all that, which are controlled
by the nav cluster keys, and the arrow keys.
But yeh, it is legit RGB lighting, rather than just limited colours, so the transitions
are nice and smooth.
We can also do that in the software that you can download from their website, which is
another impressive thing to have on a budget mech.
So first of all we have 3 different profiles that we can save stuff to.
So again, we have the lighting with all the effects and colours which works perfectly
well, and is all applied in real time which is nice.
The speed settings are a bit iffy, so I prefer to just do that on the keyboard itself.
And then we have the key customisability.
But to use this, we have to exit the LED lighting editing mode.
So we can press a key, and we can assign a new key to it.
Or a macro that you can record.
Or assign a secondary function to it.
So I can assign FN + Escape to be mute, and it will do just that.
It doesn't have the greatest customisability, but this makes it very simple and easy to
use.
So not a bad piece of software, as it does exactly what it has to do.
The Phantom is available in Outemu keyswitches, however the Phantom Elite is available with
Gateron and Kailh Box keyswitches, of course at a higher price as well.
I have Outemu Brown's in mine, which are just a clone of the Cherry MX Brown's.
But they're nice switches.
Honestly, you won't find much of a difference between the two.
This is also available in Outemu Blue for clicky, and Red for linear.
The typing experience is solid.
The stabs aren't too bad as well.
There is still some rattle, but they did lube the wire up a bit, so yeh, not bad, and above
average for budget boards.
But another big feature of this keyboard is that we can pull out the keyswitches with
the included keyswitch puller, because we have some hotswappable sockets in here.
We do have the extra 4 keyswitches included, but they're still the same switch.
Last video I checked out the Drevo Tyrfing V2 keyboard, and a couple of people said that
it looked very similar to this.
And yeh, we have the same situation with the hotswap feature.
So basically it's pretty much just for Outemu keyswitches.
This is mainly because of the pins being slightly thinner than others.
And you also need to have the gap for the SMD RGB LED, in which not all switches have.
So for the most part, Cherry MX, Gateron, Kailh, etc.
They won't fit, unless you modify the pins somehow, just because the sockets are super
tight.
However, the Outemu ICE keyswitches, will make some great replacements.
So yeh, not the best, but it's still much better than not having the option at all.
To open up the keyboard there's a couple of Phillips head screws on the top plate,
and you can just pry it open.
The bottom plastic shell is very simple.
There's not much reinforcement there, but when screwed onto the plate, it's all good.
Said plate is made from 1.5mm steel.
This is what gives the keyboard it's solid weight and rigidity.
Again, most boards like this will just have an aluminium plate which is lighter and not
as rigid, so it's really nice to have steel here.
And the PCB is clean and all, but the main difference is that we have the sockets that
the switch pins go into.
So if you wanted to, you could desolder these sockets and put in other switches, but honestly,
there's no real point.
Overall, I'm very very happy with this keyboard.
The price truly does play a big role in how I perceive this keyboard.
Like seriously, it has a good solid build with the steel plate, it has true RGB backlighting
which is customisable, with software as well.
It has hotswappable keyswitches, albeit, it's limited to Outemu, but still great.
It has doubleshot keycaps, in a standard ANSI layout.
The design is not for me personally, but it's relatively simple and should fit in most environments.
Many people may turn away from Outemu switches if they didn't know better.
But honestly, they're absolutely fine in regards to feel and durability.
And all this makes you question, how do all these other gaming keyboards get away with
being 2 or 3 times more expensive than this?
I know I'm sounding overwhelmingly positive, but I really am impressed at this price for
the package that you get.
This is like 50 bucks in the US.
And honestly, at this pricepoint, it's a very difficult keyboard to beat, and is definitely
one beast of a budget board.
And don't forget, this is also available in the full sized version if you need that
numpad.
Thanks again to Mwave.com.au for providing this keyboard for review.
And I'll chuck the link in the description below.
-------------------------------------------
An Updated Version Of My First Custom Model *LAST VIDEO FOR 2018* - Duration: 5:05.Wow guys it's been really way too long..... what is going on youtubers this is the Aviation
Air Program and welcome back to another video it's been a while and I apologize
for that so as you guys saw my first premiere video which was the previous
video which is definitely 2018 the year ending so I know it's sad to see it go
but anyways guys well as you can see I got a blank JC wings box and as you can
see the plane is out or something like that I don't know what did I done with
it well it's just a joke whatever well well well things will start so
anyways um this is an updated video for the custom model as you guys probably
see the previous video and everything so anyways we'll start with the surprise
model or anything like that so yeah so yeah 3 2 1 and wait it's something gone
or something
here it is guys so sorry close focus trouble having a problem with the phone
or anything like that yeah say yeah it's the AirBlue A320 with Sharklets so as
you can see that looks pretty cool and awesome and as you can see I applied the
new fuselage on the l1 doors and the windows and everything it looks very
awesome I know the paper is coming off but I did my best
it looks really with the result but hey I cannot complain about this it looks
very cool I converted this from a blank JC wings a320 so that is pretty cool
there's also blank A321 JC Wings on eBay
there are there from United Kingdom they're available from United Kingdom so
if you want to buy one of those well get one for a very good price I don't know
if there is more out there so I don't know somebody comment down below and
tell me this this is the updated model like I finished the AirBlue A320 with
Sharklets I forgot to add the registration of this plane AP - EDA
well this plane is supposed to be AP-EDA
well since like it when this was like the first A320 when it used to not
have Sharklets so I definitely didn't know that so it was really cool AP - EDA
had Sharklets that is pretty cool and thank you guys so much for tuning in for
this video and I hope you guys really enjoy it so oh one more thing the reason
let me tell you about the details the reason why I actually put the new
decals of the fuselage or anything like that because first of all as you can see
on the on the first on the previous one was really weird so I ripped them off so
and it really was looking horrible so that is why
I made this to make to have the new fuselage because I wanted to make it
look into the real AirBlue livery which is really cool I basically used my mom's
computer to make to print out the decals for the fuselage because my
computer doesn't have Microsoft or anything like that so it looks awesome
the size fits well I love it it doesn't look bad so anyways well as
you can see it looks nice and everything thank you for tuning into this video
once again so please leave a like comment like rate and subscribe for more
content you want to see next and so I on all of my subscribers I'm
wishing you an advance happy new year so yeah this is the last video
unfortunately for 2018 that's not unfortunate I'm just kidding
so this is aviation Airport I denote so goodbye
-------------------------------------------
"Show You" Hard Emotional Piano Rap Beat Free Hip Hop Instrumental W/Hook 2019 | Ghost Beats - Duration: 2:59.I can show you what love's supposed to feel like,
I can show you what love's supposed to be
I can show you what love's supposed to feel like,
I can show you what love's supposed to be
I can show you what love's supposed to feel like,
I can show you what love's supposed to be
I can show you what love's supposed to feel like,
I can show you what love's supposed to be
I can show you what love's supposed to feel like,
I can show you what love's supposed to be
I can show you what love's supposed to feel like,
I can show you what love's supposed to be
-------------------------------------------
The Tandy 1000 - The best MS-DOS computer in 1984. - Duration: 20:04.Radio Shack was a big player in the computer business starting in the 1970s with the TRS-80
line of computers.
In fact, by the mid 80's Radio Shack was selling at least a half dozen different computers.
And I don't just mean different variations, but rather completely different and incompatible
computer architectures.
For example, they were still selling the TRS-80 line of computers, mostly as business machines
at this point.
These were extremely expensive, often selling for thousands of dollars.
For the home market, they also had the Color Computer, which was much cheaper, starting
at $239.
In fact, at even lower cost, they had the short-lived Color Computer MC-10, which was
a separate architecture from the regular one.
You could get one of these for just over a hundred dollars.
They also had the popular Model-100 portable computer.
And if that was too large, then there was their line of pocket computers.
In the early 1980s it was not uncommon for computers completely incompatible with one
another.
And that would include big players from companies like Commodore, or Atari, or pretty much anybody
else.
In fact, there were probably a hundred different computer architectures at the time that were
completely incompatible with each other.
However, in 1984, that started to change with the introduction of MS-DOS compatible computers.
And Radio Shack also saw an opportunity here.
Now, they had already been selling their Tandy 2000 line of computers, which claimed to be
MS-DOS compatible.
However, it wasn't nearly compatible enough, and more or less only worked with text-based
MS-DOS software.
It also started around $2,750, which wasn't exactly cheap at the time, but it did have
a 80186 running twice the speed of IBMs product, however it was never a huge market success
due to lack of compatible software.
But Tandy's success with IBM compatibles would change in November of 1984 with the
introduction of the Tandy 1000.
To understand the Tandy 1000, we really need to look at IBM's own PCjr product, which
had come to market 8 months earlier.
The PCJr was supposed to be IBM's way to better enter the home market.
However, it had several problems keeping it from succeeding.
Notably, it had a terrible chiclet style keyboard, very little RAM compared to the regular IBM
PC, and it wasn't 100% compatible either.
What's worse, it sold at a price much too high for the home market.
However, the PCJr did have two things going for it.
For one thing, they had upgraded the CGA graphics so that it could finally display a full 16
colors even on an RGBI monitor, which was the standard monitor type most people were
using.
IBM also included a 3-voice sound chip, based on the Texas Instruments SN76496 sound generator.
This same sound chip was already used in dozens of arcade machines and in several home computers
such as the TI-994a, and the BBC Micro, and also in several notable game consoles such
as the Sega Genesis, and the ColecoVision.
When Tandy set out to make a new IBM compatible system, they were actually shooting to make
an IBM PCjr compatible system.
And thus, they incorporated the graphics and sound from the PCjr into their new Tandy 1000
system.
However, by the time the Tandy 1000 came to maket, it became clear the PCjr wasn't doing
as well as they thought.
So, they kind of dropped the PCjr aspect from all of the marketing material and instead
just said the Tandy 1000 was an MS-DOS computer.
But, what Tandy ended up making was actually a better IBM than IBM was making themselves.
The Tandy had a more modern appearance than the IBM and most of the other clones.
There are a few things that really set the Tandy 1000 apart from IBM.
For one thing, a lot of things were actually integrated onto the motherboard, such as the
video, the audio, a serial port, a somewhat proprietary printer port, and even two joystick
ports.
All of these things were actually separate cards on an IBM system and even on most clones
of the time.
This helped to reduce costs.
In fact, the concept of having a chipset on a motherboard started right here with the
Tandy 1000, as it was the first computer to integrate most of the glue logic, disk controllers,
and other things into a single chip.
So, while some criticized the original Tandy 1000 for only having 3 expansion slots, the
reality is didn't need very many because it came with everything already on the board,
where an IBM would come with 5 slots and 4 of them would be filled up right from the
start.
The keyboard was a bit unusual as well.
They tried to make the keyboard smaller, but still retain a lot of keys, and so everything
is really crammed together.
There are some keys that are in unusual places such as the locations of control and alt.
In fact, doing the reset of control-alt-delete is very unusual on this keyboard.
But I think the thing that annoys me the most is this placement of the hold key directly
above the arrow keys.
Since the arrow keys are not split off from the rest of the keyboard, it is quite possible
to wind up pressing other nearby keys in the heat of playing a game because you can't
feel the arrow keys as being separate.
But this hold key, is the most annoying thing to press because it actually pauses the entire
computer.
So, if you aren't accustomed to this, you will at first think the computer has locked
up for whatever reason, but pressing the hold key again will resume it.
The joystick ports were non-standard for PCs, but instead used the same joystick as was
used on the Tandy Color Computer already, meaning the joysticks were easily available
and Tandy could share at least that one peripheral between the computers.
Joysticks were actually not that common at the time anyway since IBM never intended their
PCs to really be used for games.
After all, IBM felt that marketing their computers as game machines would probably hurt their
reputation in the business market.
And one place this was particularly apparent was in their choice of video cards.
Even after IBM had given up on the PCJr, they continued to sell their PCs with standard
CGA graphics.
So, while games on an IBM XT would look more or less like this.
The same game on a Tandy would look like this.
And while games on the XT sounded like this, games on the Tandy machine sounded like this.
And thus, the graphics and sound eventually became known as Tandy Graphics and Tandy sound,
even though it actually originated on the PCjr.
The interesting thing is, the Tandy machines used the same monitor type as any IBM computer
with a CGA card would use.
That's because the 4-color limitation of IBM's CGA card was actually not a limitation
of the monitor itself, rather it was a limitation of the video card.
And thus, you can use any CGA monitor on your Tandy 1000 and enjoy full 16 color graphics.
Just to clarify the graphical capabilities.
Regular CGA had essentially 3 modes.
You had text mode with all 16 colors.
Then you had the 320x200 graphics mode with 4 colors.
This was the most common mode used in games.
Then you had a high resolution mode with only 2 colors.
Some business applications and a few games made use of this.
But, this is essentially what you got with a regular IBM PC or a compatible clone.
Yes, there were some other modes like composite mode and some undocumented tricks that could
get you some extra color with various tradeoffs, but the reality is, this was what most PC
users had to deal with at the time.
With the Tandy machines, you also had a low-resolution mode with 16 colors.
Some games made use of this mode.
I believe some of the early Sierra games like Kings Quest used this.
You also got the 320x200 mode with a full 16 colors.
This was the mode most games made use of.
Then there was a high resolution mode with 4 colors, which was seldom used.
And later model Tandy machines even added a 16 color high resolution mode, which is
even more rare because software developers would be hesitant to use this and advertise
their software works with Tandy 1000 machines because most customers wouldn't know if
their Tandy 1000 supported this mode or not.
One other interesting tidbit is the way in which Tandy graphics worked on composite video.
You see, on an IBM PC, the CGA card would output a different set of colors depending
on whether you were viewing it on a composite or RGB monitor.
And thus, software companies would have to write special support to handle both, or just
do like most did and and just support the RGB mode and forget about the composite mode
since not that many users had composite monitors.
But, with the Tandy, it actually outputs exactly the same colors, more or less, on composite
and RGB.
Thus giving Tandy users another choice for video.
Now let's talk about the sound chip.
Typically you'll hear it referred to as the Tandy 3-Voice system, and that's because
the chip has 3 programmable square wave voices.
They can't really produce any other sort of waveform, and they don't even have an
ADSR system like the SID chip has in the Commodore 64.
However, each channel does have an independent volume control.
So, it's certainly possible to use the CPU to artificially create an ADSR envelop so
that sounds like bells or flutes can be created.
However, the system is actually more powerful than it would seem.
In fact, it has a 4th voice for a noise channel.
So, really, they should have called it a 4 voice system.
But wait, there's more.
You see, they needed the PC-Speaker to be backwards compatible with other IBM software,
so that sound is also mixed in with the sound output giving you essentially a 5th voice
if you want.
And, to top it off later Tandy models even included an 8-bit digital to analog converter
as a 6th voice which is meant for playback of digitized sounds.
However, because not all Tandy machines had this, few games actually made use of it.
Beyond just the hardware, Tandy 1000s shipped with a product called DeskMate.
It was a graphical operating system but it could be controlled with a keyboard or mouse.
It included a variety of productivity applications, such as a very minimal word processor.
While not as advanced as MacWrite or other graphical word processors, it could get the
job done.
It also had a pretty functional spreadsheet.
You know, a lot of this stuff has to be compared with what was available at the time, and how
much all of these things would have cost had the user bought them separately.
This came with the computer.
It had a very nice calendar program that would allow you to schedule appointments and stuff.
And it had a little drawing program, sort of like windows Paint of the era.
Speaking of that, I should point out this whole suite of software runs on the high resolution
16 color mode of Tandy's graphics chip, which no other IBM compatible would have had
the ability to do, at least not until EGA graphics became widespread.
Speaking of that, it also included a musical composition application which took advantage
of the Tandy's 3 voice sound hardware, again something not available on other computers.
And last but not least, it had a terminal application for using your modem.
So, for the home user of the time, DeskMate gave functionality almost equivalent to a
Microsoft Windows, keeping in mind that during this time Windows wasn't all that much more
advanced than DeskMate.
The Tandy 1000 started off selling for $1,199.
Which, was actually quite a steal.
In fact, Radio Shack said it best themselves right here in their catalog.
"Indeed, an IBM PC equipped with 256K of RAM and a color monitor will run you over
$3,100.
The equivalent Tandy 1000 is only $2,048 and gives you superior graphics in up to four
times as many colors."
The Tandy 1000 was a great sales success from day one.
In fact, sales were higher the first month after launch than any other computer in Radio
Shack's history.
Of course, not all Tandy enthusiasts were on board with this.
This article in info world talks about how Tandy users are disappointed that the firm
is no longer setting standards, but following them.
However, history shows that Tandy did in fact make the right move with this computer and
over time they would slowly phase out all of their other computer architectures.
This was really the start an industry wide phenomenon.
Up to this point nearly every computer was incompatible with the next, which meant that
software had to be designed separately for every computer.
But 1984 to 85 is when a lot of IBM clones or "MS-DOS" computers would start to show
up on the market.
But none of them would have the 16 color graphics and 3-voice sound of the Tandy, or the visibility
of seeing them on the shelf of every Radio Shack store.
Thus, providing the Tandy 1000 an edge for years to come.
Of course, in order to use the Tandy graphics and sound, games had to be specially designed
to support it.
If it didn't include support, then Tandy users could still run their games in regular
4 color CGA.
However, this wasn't a huge problem since many software companies saw the success of
the Tandy 1000 and thus more and more started to integrate support for the graphics and
sound into their games.
In fact, if you look on Mobygames, you'll see there are 861 games claiming to have Tandy
graphics support.
That's no small number.
The Tandy 1000 was selling so well that in 1986 it enjoyed a 9.5% market share of all
computers sold in the United States
Of course, Tandy continued to make new versions of the Tandy 1000.
But, it's important to understand that not all Tandy computers are Tandy 1000s.
Even their MS-DOS compatible computers.
Take this Tandy 1400 laptop for example.
You know, it's made by Tandy.
It does run MS-DOS compatible software.
And it even has a name that sounds a lot like 1000 because it's one thousand, four hundred.
But, it doesn't have the special 16 color CGA or the 3 channel sound system that the
Tandy 1000 does.
Only models that are called Tandy 1000 have those modes.
So, in order for them to keep the Tandy 1000 name, they just added different letters to
the end like 1000sx, or tx, or tl.
One of the next models they produced was the 1000sx, which looks almost identical to the
original except the floppy drives are beige instead of black.
However, it did include a faster processor and internally it had 5 card slots instead
of 3 like the original.
A popular upgrade for this computer was to have a hard-card, which was a hard drive integrated
onto a single expansion card.
One really popular version was an all-in-one cost-reduced version called the 1000EX, which
came out in 1987.
It almost looked like a big brother to RadioShack's color computer 2.
It had a single floppy drive in the side similar to an Apple Iic, Amiga or Atari ST of the
day.
Also on the side, you get a volume control for the internal Tandy sound, a head phone
jack, and two joystick ports.
Again, still using the same joystick ports as the color computer series.
And placing this stuff on the side where it is easy to reach makes far more sense than
most PCs of the era where this stuff was on the rear.
Speaking of the rear, they were still sticking with their proprietary printer port.
This next port is a proprietary port for an external floppy drive like this one.
This way you could have two floppy drives like most desktop style PCs.
Also you get composite video, RGB video, and 3 expansion slots you could put whatever you
wanted in.
The EX model came with a faster processor, clocking in at 7.16 Mhz.
One interesting thing, probably done in the name of compactness, was that it has non standard
expansion slots.
So, the top cover comes off like this.
And then inside you will see 3 expansion slots.
This model already has a modem here on top, along with 1 free slot.
If we remove the modem, you'll see a memory upgrade card in here that brings the memory
up to 640K, and then as you can see, it has a pass-through for two more cards to sit on
top.
These slots are proprietary, however, it is possible to use an adapter such as this one,
and it will give you a standard ISA slot.
So, assuming the card is small enough, such as this XT-IDE card, you can use standard
ISA cards in here.
Also, an external drive was available if you wanted to have two floppy drives, which was
a common setup for most PCs of the era.
On awkward issue with this computer, however was always monitor placement.
It looks like maybe you could set a monitor on top, but you can't.
Ideally you'd want a computer desk with a monitor shelf, or you could use the shelf
that they advertised along with the computer.
The HX model sold for $799, which was actually a really good deal at the time for an IBM
compatible computer of any sort, much less one with superior graphics and sound, plus
a faster CPU.
And this computer was very popular.
However, 5 and a quarter inch floppy disks were starting to go out of style in the late
1980s, so the very next year in 1988 they replaced the EX with the HX model.
The HX moved the floppy drive to the front, along with a second drive bay where you could
mount either an additional floppy drive or even a hard drive.
However, one neat feature of the HX model is that it can boot from ROM.
So if you have no disk in the drive, and presumably no hard drive, it will boot MS-DOS 2.11 from
ROM.
That's really handy because that means if you want to play a game from disk, for example,
you don't have to boot a DOS disk first.
The HX model was better, but sold for only $699, which was a hundred dollars cheaper
than the previous model.
This was one of the best selling Tandy 1000 machines ever made.
An interesting comparison to make would be with the Amiga 500, which was also selling
for $699 at the time.
There's no question the Amiga was better in terms of graphics and sound, but the Tandy
certainly had an advantage of a much larger software library.
Of course, by the 1990s the Tandy 1000 was starting to lose its competitive edge.
And the competition was coming in on multiple different fronts.
For one thing, Tandy's 16-color graphics and 3-voice sound was no longer at the head
of its game.
Computers with 256 color VGA cards had become somewhat common and seemed to be the new emerging
standard.
And by this time sound cards like the Ad-Lib and Sound Blaster were starting to become
standardized as well.
What's worse, Microsoft had continued to improve Windows and thus Deskmate had fallen
drastically behind.
In fact, by 1991 even Radio Shack's own catalog actually recommended that customers
run Microsoft Windows on most of their high end computers, relegating DeskMate to their
less expensive computers.
The all-in-one computers like the EX and HX had disappeared from their catalogs, although
it can still be seen as a prop for advertising their monitor stand.
Later models like the 1000 RLX actually removed the 16-color graphics system that made Tandy
machine so successful and instead included 256-color VGA graphics, much like the rest
of the market.
However, it did still retain the 3-voice sound chip.
Which, wasn't necessarily a bad thing.
After all, most PCs of the era still didn't ship with a sound card from the factory.
It was typically something the user would buy and install themselves.
So a Tandy system still sounded better than a regular PC.
By 1993, Tandy was no longer competitive in the PC market and so they sold all of their
facilities in Fort Worth, Texas to AST Computer.
Which is interesting because I ended up working for AST starting in 1996 in their tech support
department, and so I actually ended up taking calls every now and then for Tandy machines
because AST had agreed to handle all remaining support for those machines.
While the Tandy 1000 hasn't appeared in many movies or TV shows, it is featured prominently
in the current hit series Young Sheldon in many episodes.
And so that about wraps up this documentary on the Tandy 1000.
I hope I was able to shed a little bit of light on what made the 1000 a special computer
at the time.
It was far more than just an MS-DOS compatible computer, in fact I think that at one time
in history it was the best MS-DOS compatible computer that you could buy.
Now, obviously that didn't last long but nevertheless, I think its very historically
important to put this computer in its place and tell the real story about what it was.
So, anyway, thats about it so, ugh thank you guys for watching!
-------------------------------------------
Gertie and Therma First Fashion Favorites The Movie Part 2 (funny skit) / AllAroundAudrey - Duration: 1:21:18.-------------------------------------------
Calli Boom & Paapi Muzik ‒ Reset - Duration: 3:17.Calli Boom & Paapi Muzik ‒ Reset
-------------------------------------------
Shadowgun Legends и планы | Итоги 2018 года с JHC Gaming - Duration: 6:30.Hello! Today we will summarize the year 2018. Congratulate viewers and
also look a little into the future, what will we expect
in 2018 ...
In the year 2019.
Shadowgun Legends in March
2018 has released.
Finally a year later probably and maybe so
promises that everything would be soon, and finally the game was released.
Since then, the game develops, I try to promote this, so that people play.
Not as much as the guest of today's video is JHC Gaming. He will also congratulate you, thank you very much for your participation, of course.
Announced Shadowgun Wargames in the summer, which we also all very much waited for
We were waiting for a new format, a new mode in Legends.
And we were presented with a whole new game, which is very cool, because it will be
possibly with other servers
better quality and things like that. Because Shadowgun Legends has its problems
Given the fact that the game develops and develops quite strongly in terms of content.
More and more of it
There are still problems, well, this is a server
You know, the biggest problem is lags and server
Fix these problems and I will play even more than now.
Also, the game Shadowgun Legends announced on the Switch. I think this is also worth mentioning, because after all the mobile game is coming out on this console generation.
which is great, although according to rumors in 2020 or at the end of the 19th, the next generation of consoles is announced,
but still it is a big step for such a company, I think.
Regarding the content that I did this year, too, let's summarize.
I experimented a lot, as you can see, this year I didn't have something permanent
there were some incomprehensible videos where I said something with the text something without text
Somewhere here I am like the last video, for example, in general, I took a sketch.
And unfortunately, for you, probably, and fortunately, for me the experiments will continue.
I am still looking for my own personal format, probably, by submitting material
creating a video and just the same last video, it most strongly impresses here this part and
Here is the heart somewhere here, but in my opinion.
This video, which had a certain history of its own, let's say, of creation, and it is very cool
I really enjoyed it
and I think in the future
there will be more such videos, more difficult videos, probably
but no less interesting, it seems to me.
Next year there will also be videos related
I don't want to call them Shadowgun Legends problems, but
things that I would like to fix.
Not publicly, but rather personally wrote to MadFinger about some problem that I notice
and not only I notice some balance or flaws in translation into Russian, because, unfortunately
Russian translation in the game
mildly disgusting
I somehow tried to help this change, to somehow participate in this, but unfortunately
response
there was no positive for me, that is, simply "No"
I fully understand this, because this company, and I am some kind of bastard
An 18-year-old guy came like this: "Your translation is bad, let me help you." But this seems to be not working in this world.
when you sincerely want to help, and the bureaucracy interferes with this assistance, let's say
Thank you for supporting this year, there have been so many
because I really again got an incredible fun to do
the last video and judging by the comments and reviews, and even reviews from the English-speaking audience
everyone enjoyed it, this was incredibly cool
For this, thank you very much and to you, and to all who participated in the creation of this video.
And now I give the word to JHC Gaming. Thank you Johnie!
Thank you buddy. I appreciate it.
Hey guys! I'm Johnie from JHC Gaming!
2018 is over
The final boss fight
Now I want to take a moment to thank you guys for an amazing year, wanna thank you guys for the comments, for the feedback, your amazing support
It really helps me, keeps me motivated, it pushes me to keep going and do what I do.
Without you guys it would be very hard.
I also want to take a time to wish you guys a Happy New Year.
2019 is gonna be an amazing year, I am sure.
Really looking forward to the Wargames release, the Switch release and everything else
I feel it's gonna be a great year, and I want to be a part of it. And I'm hoping guys you will be there also!
Once again t hanks again for everything! Happy New Year!
And I join in the congratulations to Johnie. Thank you again very much for watching our channels.
You are also worried about Shadowgun Legends, for its development and for MadFinger Games in general.
We are waiting for Wargames in 19, release on Switch
And waiting for the balance, waiting for server fixes,
so that everything was good for everyone. I personally wish you new emotions next year.
including from my videos, I hope they will give you new emotions
I wish you health, happiness, prosperity. Try to implement all your ideas that come to your mind
Any idea that comes to you, if you think that this idea is worthy of its realization, then
do not listen to anyone and just do it! It's the most important thing.
Once again, Happy New Year! See you in the next amazing 2019! Bye!
Aah, the hand is not visible! Bye!
-------------------------------------------
Ando en Micro | Primer día 519 Transantiago + Buses eléctricos BYD K9 FE FLXV85 + Varias Entrevistas - Duration: 17:23.-------------------------------------------
MUCİZE 🐞❄ NOEL PENÇE #4 ❄🐞 Uğur Böceği ile Kara Kedi - Duration: 1:29.-------------------------------------------
Savais-tu que - LE SILENCE DE L'UNIVERS - Duration: 0:36.-------------------------------------------
Sam Meets Bumblebee | Transformers (2007) Movie Clip - Duration: 3:58.What is it?
It's a robot.
But like a...
Like a different... You know, like a super-advanced robot.
It's probably Japanese.
Yeah, it's definitely Japanese.
What are you doing?
I don't think it wants to hurt us. It would have done that already.
Really? Well, do you speak robot?
Because they just had, like, a giant droid death match.
- I think it wants something from me. - What?
Well, 'cause the other one was talking about my eBay page.
You are the strangest boy I have ever met.
<i>- Can you talk? - XM Satellite Radio...</i>
<i>Digital cable brings you... ... Columbia Broadcasting System...</i>
So you... You talk through the radio?
<i>Thank you, you're beautiful. You're wonderful, you're wonderful.</i>
So, what was that last night? What was that?
<i>Message from Starfleet, Captain...</i>
<i>Throughout the inanimate vastness of space...</i>
<i>Angels will rain down like visitors from heaven! Hallelujah!</i>
Visitors from heaven? What...
What are you, like, an alien or something?
<i>Any more questions you want to ask?</i>
He wants us to get in the car.
And go where?
Fifty years from now, when you're looking back at your life,
don't you want to be able to say you had the guts to get in the car?
This car's a pretty good driver.
I know.
Why don't you go sit in that seat, there?
I'm not going to sit in that seat. He's driving.
Yeah.
You're right.
- Well, maybe you should sit in my lap. - Why?
Well, I have the only seat belt here. You know, safety first.
- Yeah, all right. - Right?
- Yeah. - Okay.
There, see? That's better.
- Okay. - Okay.
You know, that seat belt thing was a pretty smooth move.
Thank you.
You know what I don't understand?
Why, if he's supposed to be, like, this super-advanced robot,
does he transform back into this piece-of-crap Camaro?
Whoa! Whoa!
Oh, see? No. Get... No, that doesn't work. See?
Move it, you moron!
Great, now... See?
Fantastic.
Now you pissed him off.
That car is sensitive.
I mean, $4000 just drove off.
What?
Không có nhận xét nào:
Đăng nhận xét