Well ... Hi everyone it's LIL GUY DESIGN, so we find today for a new tutorial
So in this tutorial we will learn to make this introduction
So as you can see, it's a 3D logo was animated with Cinema 4D
And composite in After Effects
For this tutorial, we'll use Cinema 4D, I will also add "Substance Painter"
to work the textures
Then we could use Octane Render for fast rendering
Since the rendered CPU take time
First we will need these splines
I will pass you the link of the file in the description
They are splines that was created by Pallacium
I would put the link of his channel in the description
It's a colleague
He had drawn the outline, which is here
Starting with a spline, then he traced the background that is behind,
then the pattern. So to model this logo, we will use these splines there
I'll take the first spline, I press Alt + Click Extrude, to be able to extrude it
we start
So once I do that, I will duplicate my extrude
I'll select all that, I spend slap fashion here, I double click
And I select all my layers, I slide them there, I'll hide them in the view and in the object manager
Once I did that, I'll Make Editable my object
So here, I can Make Editable my object
Please note, I am not in the standard interface, I'm in the Model Interface
Normally you are here
One interface will change for the Model Interface
And I'm already set quickly, like this
We should just slip on these little dots
And here, we will pass that icon, it will disable the texts
I'll move it like this
I will also add quick shading
and quick shading line here
I could also add lines here
Wire and iso is all
So, once I did that, I could save this interface
Excuse me I've done, save as default interface
So that, I can change it later
We will save it as Model v2 for example
So once we did thatwe will select the lid 1
And then, we will delete the other elements
With this small square, you can switch between the front and 3D views
Front view here, right view there, top view here
So we'll put that on the front view here
We switch to focus mode, we will select our object
And the goal here is to have a clean mesh
You prove noted that no arrest. So for example, if I put a subdivision surface to make it smooth logo
We realize that there is a weird distortion
To correct this, we will add edges
so as to have a clean mesh, for quadrangles
So for that, I'll take my Polygon Pen tool
I place myself in stop mode here and I'll cut like this
And here I will also cut like this and cut like that
Once I've done that, I switch to point mode and take my selection tool here
I select all this and I delete
I have a side of my subject
I did not want to work in that side and repeat the same action on the other side
So I could remove one side, work on this side
and then use a Symmetry tool to be able to mirror what I did
So we will remove it
Subdivide our model like this, we have a problem here
You press Ctrl and then you click on the line to remove polygons
For example, if I want to remove this polygon, I press Ctrl and then I click on it
He will remove the polygon, with this tool
So here I'm going to have it cut like this
Here I am going to cut like this, I will remove this point
You have to know how to position the points so that we have a proper mesh
So now, you'll notice that each time, I try to put my edges so that they are perpendicular to the front edges
Like here for example, I will not do like
I'm going to do something that's close to normal
So once we've done that
Extrusions and bevels can be created
Then go to the second model
I try to be close to quadrangles
So the stops that are already correct, I'm not going to touch them, I'm just going to just pass
After that, I'll show you how we could manage that afterwards
Just with one click
So we'll move like this
So here I am going to cut like this
So we'll leave it like this and then we will continue. So, we will trace
Like this
Here we could remove that
once it's done. That's it, you go notice ... in fact
These lines that have different colors from others
On your version, I think you have a different color from mine because I configured my Cinema 4D
These lines represent Ngons, surfaces that have more than four sides
Like here for example, it has more than four side
To remove these Ngons, simply switch to polygon mode here
Make a right click and then at the bottom, you Remove N-gons
Once you have done that, it removes the Ngons and then you will have the correct surfaces
Once it's done, we'll be able to extrude it
An extrusion around our geometry, especially the contour
So we will take this tool here, Selection by loop
Once we have selected this tool, we go here "select delimitations"
So the delimitations are the outlines of our objects
We will select like this our delimitation
And then we will make an extrude of 5 cm
Here, there is a problem, so we will deselect
This part here by pressing CTRL, since after we will make a symmetry
So we deselect that and then we do it again
So 5 cm That's it, once it's done
There is a problem, we do Crtl + Z
We will also deselect this internal part, because we just want to do it on the outlines
OK ?, So we redo an extrude at 5 cm
Then we will go down this extrude by clicking on this square
So this square I configured them A + W as on 3Ds Max So I could swap the windows with A + W
I think that on your version it's just the middle button for can do the same thing
So I'm going up like this by 5 cm
So I actually have an extrusion like this. Then I'm going to slide that in the depth to have a small volume.
You can notice the bevel here. This bevel has been reworking with internal extrusions.
Here I will redo an extrusion by pressing CTRL
I could just move in backwards
Like this
I'm going to slide that of 5 cm who is this extrude here
+ 3.5 cm which will be the thickness
So once it's done
We will also move the internal part here
Here, we could directly move 5 + 3.5 cm
To join the outline
once it's done, we'll go to the right view
Click here (on the small square)
We will select the profile here By switching to polygon mode
and checking Selection Tolerance
If you do not check the selection tolerance, it will just select the polygons in front
I would like to select the whole part with the thickness at 5cm
So I'll check here tolerance and then I'm going to select this side here
There is a problem
Ok that's ok what are we going to do I will do CTRL + Z
You will even notice that we have forgotten this outline here
We will also select this one and that
We will first do this extrude to 5 cm
Then extrude by pressing Ctrl
at 5 + 3.5 cm, so nearly 8
To have here, the extrude at 5 and then the extrude at 3.5
Because in fact I'm going to select all this extrusion to 5
to clone it so that it's symmetrical on the other side
So we get back into this Right view
We will select this part in polygon mode
excuse me we go back to the perspective view
And then with U ~ P we will split our model
In fact, what he does it's going to duplicate the select part
You can see it here
once it's done
We're going to overthrow her
So to reverse it we select all the points
Here instead of 5 we will go to -5
So he overturned our volume
You can notice The volume has been flipping
How is I doing to fix my logo so that it is properly linked
For that, I'm just going to here in move mode
And then I'll be able to move like that my points to fix them
But there you notice that it's not accurate
if I position like this
And that I come in this view we can see that it is not connected
So there is a tool in Cinema 4D that allow us to do that in one click
It's magnetism So he'll just have to activate it
And then here select a magnetism So
there it was by default in point mode
if I do not select anything, I can not magnetize
Should select magnetism point So he's going to magnetize the points actually
If I move like this, you will notice that there is a magnetism that is created
In a thickness of 10 cm Where do I see the thickness ???
By doing Shif + M I could here see the ray of my magnetism
If for example I put that 100 you can see that
just moving a little we have a direct magnetism
Suddenly he does not see the difference between these two points here
because magnetism is very high
So with 10 it goes well it was just to show you how to handle magnetism
After that you can turn off this magnetism
And once it's done you will notice that everything is well fixed
He'll just have to ... Because currently I have two geometries
So I want them to merge them
For that, I will select the two geometries
I'm going to do objects and then "Connect objects + delete"
Currently, we have one object but this object is disconnected from the other
So if I select him I'm doing U ~ W
That's it here, select the collected elements U ~ W We can see that the object is still disconnected
So he is not connected to the first
That is, if I add a smoothing
we can notice here, this shape is very smooth
but this one, there is a line separating the two objects
So to connect them so that they can not move that
Like this and leave a void
We will have to select all the points make a right click and then here "Optimize"
We will pass the tolerance value to 0.01
what he's going to do is weld two points that are in the range of 0.01
So if I press OK, you'll notice here
when I select here for example this point I will disable it
when I select here we actually have two points selected
To have this front view, you do Shit + V and then you will activate selected points here
You can enable all settings
It is useful for see the distance from the camera the recent tools
We can also use recent tools
Here you can see the frames per second
If you activate that you have all the parameters that I have
You can change the camera at any time Change the track
Here I select that, I have two points and if I optimize, we have a point
So what am I going to do it's selecting all the points
Currently I have 599 points
I will do an optimization and then I go to 480 points
So, the object is connected but there is another problem
If I reactivate my smoothing you can see
Currently, there is a problem
This problem comes from the fact that we overturned these polygons
So in fact, this face here is the opposite of this one
So this face is rather inside
She is not here
So that's the inside of this face
It's rather the opposite in fact
So I select everything
All my polygons we can notice that there is a difference of color
Simply because, this selection here it's her normal
Currently we visualize her normal
While here we visualize instead the opposite of the normal
So in fact, the right color and inside Do you see the difference?
that's the internal and that's the normal
To reverse this normal there
We will simply select all our polygons and we realize
that there are more normal polygons than polygons overturn
So we'll just do, "align the normals" to be able to uniformize them
So they are all in the same direction if I activate the "Subdivision Surface"
it goes nickel it was just a parenthesis
after doing that, I'll add here
this shape
so to do it, I'm going
Select these polygons here Like this
I make sure I do not select last ticking "limit to visible elements"
And then I go, by keeping "Shit" select all these polygons
I'm going to do an internal extrusion about 2.5 cm
ok and now i'm going to make a "Bevel"
A bevel like this from about 1 here in the offset
And then 1 in the thickness
Just a little bevel like that so the problem now
what happens is that
Our object is not merged at this level at the axis of symmetry
He makes an internal bevel It's normal
I would like to have this bevel who continues like this
As you can see on the intro
To have a bevel that continues it would be necessary to return to this level
So These points here, we're going
Ctrl
Ctrl, I will select these two points I also select these two
I will pass the Xs to 0 and 0 I'm enforcing
in fact, it will allow me to align these points on the axes of symmetry
I do the same at the top
I hope this is the case for these points in fact it would have to be all aligned to 0 0
Once it's done we could now move to symmetry
Once we did that We have our symmetry, so we could break it down
And then there, we have only one object
There, we have a single object
And we can assume that he is connected Right here
It's connected so we will select the polygons to ... Ctrl
we will select polygons to extrude
Values ​​have been maintained We're just going to enforce
Here apply
That's it, you notice now that the bevel is merging here
that's ok, so once we've done that we're going now
generate the bevel on this form here so on the first bevel here
so for that I'm going to do select the loop selection tool
I will select my model you will see it here, there is no preselection
Because I checked "select delimitaions" Should uncheck it
And then I will be able to have preselections
So here, I will select these two places
it's two outlines After selecting that
I will make an internal bevel
So we'll do an internal bevel little bit like this
We will do it at 1.5
Then I will do an extrusion
We can go back to inside
That's it, suppose I have an extrude of -0.75
Ok, and then I redo 1.5 Then
so this time it's a little too much
I would like to have the same intervals between polygons
once I did that so I'm at 1.3
I will redo an internal extrusion to 1.5 it gives us a little complexity to the logo
A kind of extrusion a little complex
So once we've done
Once we did that we will simply select edges
To perform a bevel because now you notice that
I activated several modes to be able to visualize the forms of my logo
Simply because there was no bevel in fact
When rendering, it's ugly
you can see that it's ugly and even the shape we made there in front is not visible
It is visible only in the mesh There is nothing that is visible now
And if I activate the "Subdivision Surface"
We can already notice that the logo has a beautiful shape
There is more deformation as we had at the beginning it will be very interesting
So we will move to the selection of edges to make a bevel
this is a very interesting stage you really have to be very attentive
We are lucky that today we can use a procedural bevel on Cinema 4D
which could be changed at any moment
we could modify the selected edges at any time
before you had to make a bevel and then if we had ever forgotten an edge
it was necessary to start again the bevel on this edge
And it had to create problems every time that we forgot an edge
So we're lucky we have a procedural bevel
So what we will do is select
this edge here
Then
This one the outline
Then I select that
the beveled edges to make the shape a bit cool
So, these edges that I just selected I can save them
using this tool once I save it
If I do a bevel You notice that
Already it does it on almost all polygons
Should simply have moved the selection here
To be able to do the bevel only on my selection
So, I prefer to put it in the object and here we will go
Pressing ALT we could reduce the offset
we're going to put it to 0.3
And then, increase the subdivision by simply putting 1 here
we will be able to subdivide the bevel
The more you increase it Then you will have subdivisions
Just put it to 1 that's very sufficient
What is happening now when I'm doing a
When I activate my subdivision surface
We note that our extrusion that we did here indoors is much more visible
that if I had disable it for example
You notice that it's a lot finer
we will also add a bevel here
So we will double click here we will add it
if I save and I do that
You see the delirium
So we will do it on all the places where we want to reinforce the shape
We will select here right here
right here...
We could very well do it on one side and then
We could very well do it on one side and then after doing a symmetry
It is what I am going to do
Before continuing I will first record that
Before continuing I realize that I forgot a part
In fact there is an extrusion up there
There are extrusions here
Extrusions here that I had forgotten so these extrusions there
I go
I will select that like that
I'm going with this tool here add two edges
I'm going to enlarge them, about 140%
So 135%
On your software, it's ticked "create Ngons" Should be disabled for not having Ngons
once it's done
We will double click here and double click there
And then create a bevel
Once it's done We will press Ctrl and then switch to Polygon mode
to be able to create a polygon selection
Then extrude it
we will do an extrusion of about 1.5
Once it's done We go
There is a problem
I will first create this form before moving on to internal extrusions Ctrl + Z ............
Excuse me i'm going to show you it would be really fast
That's the modeling on Cinema 4D
If we were on Houdini, we will have managed this problem easily without going back
So here I'm going to lose a lot of steps
So I do Ctrl Z several times
I advise you to increase the number of times you can
that you can undo
So it's Memory
it's here in Cancellation Level I put at 1,000
So I could cancel at so many times that I would like
So here, I canceled everything and then I'm going to redo my thing
Everything remained save so I just wanted to click
I do not need to look at the value I'm just applying
And it's nickel
Now I could select that
Move a little be like this
I will select that Move as
just ready within 1.5 You should look at the displacement values
Once that's done We resume our selection here
There, I will not explain anything We already did it, that's it
It's just a repetition
I'm going to copy this value I will use it later
Internal extrusion, after that Bevel
I was at 0.75 we will pass that to 0.6
Because there is extrusion at the top who could buger
We do an extrusion at 0.6 Like this
Attention is rather -0.6
Then a bevel at 1.33 Apply
And I will go back to -0.6
Then now I will be able...
And there you will notice that at the top there is more problem, everything is ok
So what am I doing afterwards
It's selecte my edges You can save your project
I just did it
Once it's saved we will now select the edges
Now, here I do not need to maintain
We're just keeping in fact the angles
The angles of our object
What I'm going to do It's only working on one side
And then after, I will make a symmetry
I'm going to press Shift and select all
So why do I select at this level I could turn off
We will see later if it goes
It's often better to do selections loops
When we are on a complex place
You have noticed here that each time, I selected by making loops
While here, it's better to continue quite simply
Once you have selected like that
It is better to continue to avoid having
Distortions at this level
You see, here I select
here I continue
that too I could select To maintain this edge here
So, I'm going to select that ...
Then here you select that here inside, we have something we forgot
This line here
We will maintain like this
Like this also
But here we can not add Since we will smooth this part
Similarly here, we will smooth we will not need bevel at this level
There I made a mistake I will go back Ctrl Z
Excuse me
So here, I'll have to select
I can not visualize in this way I should come here
And that I select
So, we will select all that
that's the top of our bevel
We also select that
We could go down with the selection here if one wants
I'm going to stop here because it could create a line above
So I deselect
Here again we will select all the outlines
Here I select the central line
this I select
this I select
Here I select that
I could already save it huh
and then I save my project if I want
There I think I have to select everything
So, we have that here too this part must be hard
to be solid rather than smooth in fact
Rather than smooth we will have Solid stuff
There we do not care
Everything is nickel
You saw I left the edges only where it's
It's a bit curved to smooth in fact
the form
and maintain my selection
So we will select this tag here register our selection
We will press Shift and then add our bevel
And move the tag here
So we go on this mode and then we're going to slide here has little ready in the
0.6 en appuyant sur ALT
0.6 it's too much
There is too much
We will tick "limit" here
Put this to .5 and add one edge
it looks pretty good
I feel like it's a bit too much the bevel, I feel it's a little too thick
You notice at .5 it was very round at that level
Whereas if I go to .3 we now have a shape
A representative form of our extrusion
There are still collusions at .5 it was worse
we're going to pass that at .2
and now we have all the forms
once we have checked that we can see
There are just a few places to correct but it's already it
This side goes nickel
Should simply add the segments that are missing here
And that's all
so here we have some deformations I do not know if, by removing these polygons here
he will be able to correct the problem
So, you see it starts to buger there
So, it is better to maintain like that
like that it's not bad then there is another problem
You must also maintain like that
you see?? every time we should continue the selection
So we would always have to continue the edges
you did see? in fact once that I continued here, he is goes nickel
so we will now add this edge
it is essential in fact
Now he understands better how is our geometry
so once we did that then there are problems here
We will correct that
So who is this happening
Bah, here I'm going to maintain this edge
We have a flat surface ,so
I had already maintained here
And here it bug a little
we could also we do not care if there is a deformation
here I can stay in this direction
You noticed a slight distortion here
If I maintain like this
It creates a bevel at this level
and then the Subdivision Surface will better understand how is the form
it leaves me traits, it's not matter with the textures, we could hide that
So once we did all that
We will make our object symmetrical
I do not know if I'll be able to do it like that
Well, I'll have to delete this part here
like this
We will delete
You noticed that I select in point mode
To avoid keeping the points
So, I go directly to the points removing
So here four hundred ninety seven
As soon as I apply symmetry there is a problem here as there is a bevel
So I'm going to pass my symmetry in a connector
Pressing ATL
I pass in a connector and then I will move my
I'm going to move my bevel over the connector and then the tag on the connector
What's going on
Well, he does not do anything we're going to break it down
broken down that
I do not have my selection?
what we do
So this case we have no choice we would have to break down our bevel
That's what I really wanted to avoid but I have no choice
We will still do it a bake of that
We will duplicate
we will hide that
We'll remove that from the layer
And we will hide what we have just duplicated
at any moment we could go back to the base
Because I'm going to break down here
I'm going to convert that into an object
so here I have it converted to an object
once I converted to an object
I have the bevel that applies
and I could not make any changes on the logo
that's why I keep a backup
And my symmetry now How do I correct it?
I will simply increase the radius of tolerance
To be able to connect my lid
Or
here I'm going to hide that
I'm going to slide all this by pressing Ctrl in "Logo"
And then I'm going to hide that
In fact I will select and then I will remove here
The central edge here and I will record
what happened
Ctrl move to layer to hide
in fact I removed the central edge and then
He made me my symmetry I will not need to put a tolerance here anymore
Once I editable it
I will first duplicate my bevel
I'm going to break it down
by converting my object
Then I delete and I go back here
I will here select only the central edge
and I'm going to record it
right here
After performing my symmetry excuse me
I select the central edge I record it and then I place the bevel
Quite simply
And that, I could now convert to an object
So, I have my form that is nickel
With the bevel it presents well
So that was only the first form
There in front, I think we are very close to the result
after that, we will be able to
decrease that width
.95
And we will be able to put all this in a neutral object
the curvature allows to deform a geometry
there, I could deform it like this
So, I'm going to put my curvature here
I have "adjust to parent"
I can not do it with my subdivision because it's not an Editable object
So I first do with the object
What he does is that he adjusts the size of our curvature to the size of our object
So, now if I'm doing an incurvation you see that goes in the other direction
I could now rotate as I want
I would like something like this So by pressing Shift, I turn 90 °
Then Shift I turn 90 °
And here I will redo adjust
You see that every time It adjusts to the proportion of the logo
And what am I going to do it's changing the length here
I adjust and modify the length by dividing by 2
once I divided by 2 I will take this value
I'll put it in the X here
and I will also divide it by two I think If I pass it to 0 here
To actually place my curve right in the center here
He is not in the center but it's already that
If I go to 0 here 0
In fact it would have to be half of our object
And it really starts in the center here
For that we will move like this manually
a litile like that
and the little one who stays there we do not care
Now if I do my bend
We will make a curve of about 25°
To have this deformation there
And then I'm just going to spend here in unlimited influence
It will allow me to do a symmetry curvature in fact
So 30 ° it could go
I do not know if it's too much in any case, we will see during the animation
And I could put it back here simply
I will disable that
I have my logo here that creates a small line
To avoid the line I have in the middle
I could select only the central edge
and then I'll do "Dissolve"
it will cancel out these points and this edge
and I could have a shape
So already our logo he will be like that
So, we're not going to zoom in until we see the flaw
It's not bad on a distance of little like this
Yeah, it's not bad
So here it was, just the first part of this logo
So, it took us about an hour
We will attack the next part
the second part
In fact I'm going to stop there to start a second part
To model the rest of our logo
Who will be the second part this one here behind
I think we really finished with the very first
We'll go to this one on the second part
Go to all friends
For more infomation >> O QUE A CUECA PODE DIZER SOBRE UM HOMEM - Duration: 3:13. 
For more infomation >> rire - Duration: 2:23. 
For more infomation >> Любовь по Знаку Зодиака 2018. Любовный Гороскоп для всех Знаков Зодиака на 2018 год - Duration: 4:49. 
For more infomation >> Sức khỏe - Cách chữa amidan hiệu quả từ cỏ màn trầu - Duration: 3:59. 
For more infomation >> Игровая в торговом центре. Playing in the mall. - Duration: 5:45. 
For more infomation >> MIJN NIEUWE CAMERA!?📷 - Duration: 6:03. 
For more infomation >> İnsanları FENA TROLLEDİK! - TrollAbii - Efsane Şaka - Duration: 4:36. 
For more infomation >> СУПЕРСКОРОСТИ 4D Программы легенды Академии Нейроника/Добейся успеха! ИЗМЕНИ СВОЮ ЖИЗНЬ - Duration: 12:24. 
Không có nhận xét nào:
Đăng nhận xét