Waching daily Feb 24 2018

Rotterdam Stadion

For more infomation >> Trains at Rotterdam Stadion (June 2017) - Duration: 23:17.

-------------------------------------------

Pokemon ultra soleil ☀ épisodes final la capture de zygarde - Duration: 7:44.

For more infomation >> Pokemon ultra soleil ☀ épisodes final la capture de zygarde - Duration: 7:44.

-------------------------------------------

Karela Wafers and more... - Duration: 7:22.

Hi Friends!

I am Nalini Malkani

Welcome to my cooking show "Nalini Ki Rasoi"

Today I am going to prepare Crispy Karela Wafers

Please dont forget to press the Subscribe And Bell Icon button

So that you get instant notifications of all my upcoming and new recipes

Lets see the ingredients required to make Crispy Karela Wafers

250 grams bitter melon (karela)

2 tablespoons of gram flour (channe ka aata)

2 tablespoons of rice flour (chaawal ka aata)

Juice of 1 lemon (1 nimbu ka rass)

1/2 teaspoon of celery seeds (ajwain)

1 teaspoon of aniseeds (saunf)

1/2 teaspoon of red chilli powder (lal mirch powder)

Salt according to taste (namak)

And oil (tel)

To start with make thin slices of the bitter melon (karela) in a mixing bowl

Add juice of lemon into it (1 nimbu ka rass)

Salt as per taste (namak)

Mix well

So that the bitterness of bitter melon (karela) comes down

Cover the mixing bowl and let it marinate for 10 minutes

After 10 minutes of marination add gram flour (channa aata) into the bowl

Add rice flour (chaawal ka aata)

Celery seeds (ajwain)

Red chilli powder (lal mirch powder)

Lastly aniseeds (saunf) and mix well

Once mixed well start frying

Fry the bitter melon (karela) slices till they become golden brown

Please fry only on medium flame so that the bitter melon (karela) slices become crispy

Once they become golden brown remove the bitter melon (karela) slices

For any remaining slices fry in the same fashion

Yummy Crispy Karela Wafers are ready to serve

Lets see the ingredients required to make Mutton Paya Masala (Goat Trotters)

6 goat trotters

3 onions finely chopped

Puree of 3 tomatoes

Hot spices - 2 bay leaves, 5 cloves, 2 black cardamoms, 7-8 black peppers, 2-3 cinnamon sticks, 4 green cardamoms

2 teaspoons of ginger garlic paste

1.5 teaspoons of red chilli powder

1/2 teaspoon of turmeric powder

1.5 teaspoons of coriander cumin seeds powder

2 green chillies finely chopped

1 bowl coriander leaves

Salt as per taste

3 tablespoons of oil

And water

To start with put some oil in a cooker

When the oil becomes hot add hot spices in it

After putting hot spices saute for 2 minutes

Add onions

Saute the onions too

Saute the onions till they become golden brown

Add salt as per taste

Salt is added with onions so that the moisture of onions comes down and becomes brown

Next add ginger garlic paste

Saute again for 2 minutes

So that the rawness of garlic goes away

Next add tomato puree

Cook and saute the tomato puree with other ingredients till oil does not come on top

Once the puree is cooked add green chillies and salt (as per taste)

Next add red chilli powder, turmeric powder, coriander cumin powder

Add powdered hot spices and mix well

Saute the ingredients/masala for 2 -3 minutes

Add goat trotters

Add some water

And close the cooker lid

After one whistle keep cooking the goat trotters on a low flame for 20-25 minutes

After 20-25 minutes put off the flame

Open the cooker after the cooker comes down to a reasonable temperature

And check if the Mutton Paya (goat trotters) Masala is ready

Add coriander leaves for garnishing

Mix well and serve hot to enjoy this delicacy

Lets see the ingredients required to make Matar Pulao

2 bowls of rice (that have been soaked in water for 10 minutes)

1 bowl of peas

12-15 cashew nuts

1 tablespoon of raisins

1 teaspoon of ginger garlic paste

1/2 teaspoon of turmeric powder

Hot spices - 2 bay leaves, 5 black peppers, 2 cinnamon sticks and 3 cloves

Salt as per taste

2 tablespoons of oil

And water

To start with put some oil in a cooker

Add hot spices

Saute hot spices for 1-2 minutes

Once the hot spices start giving out their fragrance add ginger garlic paste

Saute the ginger garlic paste for 1-2 minutes so that the rawness of ginger and garlic goes away

Next add peas and fry for 1-2 minutes

Once the peas are fried. Seperate the water from the soaked rice and add the same in the cooker.

Saute the rice with other ingredients

Add cashews and raisins

Saute again for 1-2 minutes

Further add salt as per taste, turmeric powder and 3 glasses of water and mix well

Next close the lid of the cooker

Let the cooker whistle twice and then put off the flame

After putting the flame off let the temperature of the cooker come down to a reasonable level and then open it

After opening the cooker check if Mattar Pulao has cooked well

Mattar Pulao is ready to serve

If you like this recipe

Then please dont forget to click on the Subscribe button

Links of my other recipes are also on the screen for you to see

I'll be back with more recipes

Till then take very good care of yourself and your family

Stay healthy, happy and fit

Thank you for watching Nalini Ki Rasoi

For more infomation >> Karela Wafers and more... - Duration: 7:22.

-------------------------------------------

NIGHT LIFE IN POLAND!- DONT MISS IT! - Duration: 3:10.

hello, welcome back to polonik channel

as you know I am living in poland and vlogging in youtube

today I am going to show you the night life in poland

if you are ready then lets start

here is Poznan

as you can see everywhere is full of light and people

everyone enjoying outside

this place is old town

in polish stare miasto

every single day

and every single hour

non stop a lot of tourists are coming

a lot pubs , clubs

are full of people who hangs out and enjoy the life

as you can see all people are prepared and

ready to go club and start night life

and it is their daily routines

these girls are working for strip clubs to attract clients

and this Pijania pub

is the most popular pub in the poland and almost every big city it is exist

when you go there for forget to try

tatar beef and vodka shut

all the time but a specially this place

is full during the evening and night time

and many markets are open

24 hours

and all clubs might be full even you can't enter

it is all the time full thats why

it will be better to go more early

here is also another

latin club

this is also another open club

here you can't hear any song

everyone has headphones

and people listen musics from headphone

and dance with it

you can see these kinds activities

summer even during winter

and here always there are place for buying

food and alcohol

and as you can see

how they enjoy on their own

another pub

pubs street

and the man who sit and eat a food

probably after drinking he got hungry

and kebab places

for sure it is the first place you should visit

after the club

and everyone goes there commonly

end of the video

if you open it first time then

don't forget to like and hit the subscribe button

don't forget to share, if you share then our Chanel will grow up more!

thanks a lot for watching me

see you in another video byeeeee

For more infomation >> NIGHT LIFE IN POLAND!- DONT MISS IT! - Duration: 3:10.

-------------------------------------------

BATmod l by Vape Systems l ЛУЧШИЙ МЕХ ПОД MTL l ENG SUBS l Alex VapersMD REVIEW 🚭🔞 - Duration: 20:01.

Okay folks. An RTA on the mech mod. From today on, I declare it relevant.

I take on too much, but whatever, let it be so. At RTA on the mech mod is cool.

Guys, i have an interaction for you - do you use RTA's on mechs? What RTA's and what mechs are you using for making such a setup? Leave a comment, it'll be very interesting to read

And we're begin. And today we have an RTA with mech. To be more exact mech under the RTA. Straight from Belarus. Let's roll. Intro...

It's great, friends

Today our guest is BATmod by Vape Systems and on the top i have By-Ka v7

Together they look sexy

Folks, Vape Systems is based in Belarus and they make whole lot of nice MTL devices

On the count of Vape Systems, to be exact on the count of the manufacturer and founder of FlexoPrint Sergey is whole lot of devices

One of my favorite RTA's is By-Ka v4. At the moment in here is By-Ka v7 and under it is that exact mech mod which we are going to talk about

This is BATmod - mechanical mod that is made for MTL devices

On the market today it's rare to see a device that is made specifically for MTL

And at the moment MTL devices is sort of hyped so release of such mechanical mod is relevant

So without delay let's dive down, as i used to say, let's disassemble, assemble back and look what Belarus manufacturer is capable of. Let's roll...

Okay folks, this mod is came in that standard blue package with Vape Systems logo

All around there is no information besides that sticker Sasha, but that's in my case

Under the top cover we see a soft material that is not letting to shake contents

Under that cloth you will find massive User Manual on Russian and English

And i will tell you, friends, this User Manual is very important element of the kit contents. So read it carefully before use

Or you can find this User Manual on official site in digital form

Since i have full kit i have also an adapter for fitting the 22mm atomizers and silver-plated brass pin

Also in contents we have bag of spares with spare spring and 2 o-rings

And of course we have the mechanical mod itself

Before we get a detailed look we will talk about specs

This mod is made of 304 SS and available only in Steel color with satin finish

If features two types of fit - 22 and 23mm.

It have side Fire button with Lock option and brass silver-plated contact group

It have adjustment option for the length of the atomizer pin and height of the battery by screwing connector piece and bottom cover

Also this mod have protection for preventing liquid get inside the contact system and have vent holes

Main diameter of the mod is 23mm, height is 87mm, weight is 110g

Okay, let's give it a detailed look. On the top we have 510 hybrid connection, you can call it that way

The connector itself have cutouts and holes for convenient unscrewing, in case if it's stick to the main body of the mod

This connector is fitting 23mm atomizers and it's unscrewing counter clockwise

As i said before this mod is fitting two types of atomizers - 22 and 23mm

In here we have a connector for 23mm and in here is for 22mm

If you look closer you will see that edge has a bevel which is for fit 22mm

I think you noticed that 23mm connector is a bit lower

Next we see positive silver-plated brass pin

This pin is removable and unscrews counter clockwise

That pin is for working with 23mm connector

Since 22mm connector comes with longer pin

For understanding - the pin which is on the right side is for 23mm connector, the pin which is on the left side is for 22mm connector

And the last thing that I wanted to draw your attention, regarding this pin, is to the cone bottom part - with this cone the contact is happening. And a little bit later i will show you how it's working

Moving forward. In here we see a plastic part - sort of housing for contact

Later we will disassemble and look what it's like inside

And on the bottom we have a button which have this locking ring. It turns right and left. Like so we unlocked the button and now we are able to press it

The button itself have a knurling for convenient unscrewing since to get access to the contact group we have to unscrew the button and the screw on the opposite side

The ring also have cutouts for convenience of using

Of course all this part is removable and it's unscrews counter clockwise

On the bottom of this contact group we have another pin - this pin will get direct contact with your battery

This pin is removable as well and unscrews counter clockwise

Inner part of this pin is also conical for a contact

Also take a notice that silver-plating is starts to peel off already, even though it was in use for a short period of time

But due to constant change of batteries the silver-plating is peeling off like so

Forgot to show you another thing about this screw - besides it holds the contact group it is also a stopper for a locking ring

Okay folks, we are going to look inside later, let's finish with the details.

Next we have a tube where we insert the 18650

The tube have engraving of a bat and the name of the mod. Also there is vent holes - 4 in a row, cutouts for convenient grip and bottom cover

The cover have engraving with the logo of manufacturer and serial number

This cover unscrews counter clockwise

And now we have an access to a slot for 1*18650

I have zero complaints about the threads of this mechanical mods. Everything screws smooth. But of course we have to take care of them from time to time by cleaning them from contaminants

Okay folks, we're almost completely disassembled this mod, but we have contact group left untouched

And we're about to disassemble it right now

For a start we need to screw out fire button and like i said it have knurling for a convenient unscrewing

Unscrewing it by hands is kinda challenging, but possible

So it's easier to unscrew the button with ceramic tweezers

After we removed the button we need to unscrew this screw which is also unscrewing counter clockwise

After we unscrewed both the button and the screw we can get rid off this ring, but if you want to clean your contacts it is unnecessary

And now we can push out that plastic housing. And we will do so by pushing it out on the side where the pin that contacts with battery is

By push it a little we can extract it. When you extract it, be VERY careful since we have a spring inside and the plastic pusher itself

The spring look like so and we have a spare

And this is how pusher looks like. It's made of plastic and it have metal part which is the main connection of contact

All those 3 parts can be disassembled, as you can see it contains of 3 parts - metal part is between 2 plastic parts

That plastic part have a cutout which is a slideway for button pressing

And metal part is coned for a good contact

Friends, i want you to take a notice - i don't have any noticeable arc damage in here. Though i have some dark zones, but it's not critical

The main thing about this mod is not to use resistance below 0.5ohm, then you won't have to clean your contacts often

And now for clarity i will tell you how the contact is happening

Upper pin is contacting your atomizer pin, lower pin which is contacts with your battery and the middle part will make contact them together when fire button is pressed due to the cone

So this system is pretty simple and logical

Okay folks, it's time to assemble it back and i can say it's a laborious process, so take a look how to do it correctly

For a start place that plastic pusher with central metal contact back in place

Important moment - you have to place this plastic part with that key so it will be up to these holes

But anyway after assembly this part will shift and you will have to correct it

Next install the spring in the opposite side so it will be pushing each other away

Next we take this metal part which have 2 little pins, these pins is side guide as well

Find the correct position and install this plastic part inside

Center it to make the holes match

Push the spring inside from that side

As i said this plastic part is shifted. Place it so it will be on the bottom and after fixate this plastic part inside

Now screw a pin that is contacts with atomizer - don't force it too much

And now screw a pin that contacts the battery, don't over tighten as well

After this done screw in this screw and button

Tighten it with ceramic tweezers and this mechanical mod is ready to work

Check if ring is turning and button is working, so this is ready to work after, let's say, cleaning

Okay folks, now i will tell you about actions sequence, which is very important in assembly of this mod with atomizer and battery

First step: we take atomizer and connector, in this case 23mm since I'm using By-Ka v7

Screw it in to the end

I swapped the pin from 22mm to 23mm behind the scenes

Now screw the connector with atomizer to contact group

In here we have a slight gap that is depends on the atomizer connector or pin or length of pin

After this screw in the tube and insert 18650 negative up, since vent holes is on the bottom

But in this case it doesn't matter since these vent holes is blocked by the battery

And after this we screw in this cover which holds the battery and adjusts for its height

I think you noticed that we have a gaps on the top and bottom, but that's because of how it constructed and of its features

Of course due to some atomizers have adjustable pin you can get rid off at least of upper gap

But you have to accept that there will be a gap on the bottom. And i will repeat that it's a design nuance

Okay friends, it's only left to unlock it, push the button and get a vapor, but before we will back to face-time i will show you how this looks with different atomizers

This is how this mod will look like with By-Ka v4 which is 22mm in diameter and screwed to the 22mm connector.

This is how this mod will look like with By-Ka v6 which is also 22mm

And now we have Kayfun Prime and it's looking decent as well

And this is how BATmod will look like with Berserker Mini 22mm. As i said you can adjust it so you won't have those gaps

For example right now atomizer is fully functional. You can see that there is vapor happening

But what vapor you can get out of MTL device? There wasn't be much

So folks now we have a gap only on the bottom

Okay folks, it's time to get back to face-time and speak about pros and cons

Thanks for your attention in close up, let's roll

It's have its own charm

I definitely like this device and how it looks

At the moment i put the Berserker and i like this setup. And I'm using it.

Anyway, i found some cons in this device and, of course, the pros which we are going to talk about right now

First con to this mechanical mod, to be exact to the contact group and to be even more exact for the silver-plating

It's very thin and in even some short amount of time of usage in some places this silver-plating is peeled off

But as soon as you get to the cleaning of contact group you will lose it completely

I want to say something directly to the manufacturer and recommend to make separate contact group of solid silver

So people who is wanted contact group like this will gladly spend their money on it

Next con i'll give for difficult access to the contact group insides

We have to unscrew a lot of small parts and then assemble it back

This requires a big amount of time, you have not to lose any small part and correctly place some elements of contact group

It takes a lot of time and for this inconvenience I give a con

But in defense I can say that you won't have to clean it often since it is designed for builds above 0.5ohm

And as we know, the higher the resistance from 0.5ohm and up to 1 ohm the less arcs we will get on the contacts

So if you will use a build that is 0.7 or 0.8ohm there will almost no need to get inside the contact group

Now folks we are going to talk about nitpicks

First nitpick i have is for gaps that is left after full assembly

Some of you may dislike it, especially the ones who like everything sits flush. In here there will be gaps anyway

And like i said with some atomizers that have pin adjustment option you can get rid off upper gap completely

But lower gap will always remain

Next nitpick is for plastic thread that is for screwing metal parts of contact group

Plastic thread is pretty short-lived thing and it must be treated gently and carefully. Don't overtighten it and don't put force on those plastic part because otherwise you could damage them and your contact group become unusable

So be aware of it and be careful with plastic threads

Next nitpick for vent holes. Yes, they are here and it's good, but at the same time they are blocked with battery

Anyway air goes through. I blew in some vapor in these vent holes. I tested how it comes out with battery installed inside. The air comes out, but anyway, in case of emergency ventilation process will be difficult

Because vent holes is blocked with batter

I recommend to the manufacturer to rethink this moment and place those vent hole lower or place it where the contact of negative or positive contact with bottom cover is happening

Okay folks, now it's time to talk about pros

But the presence of certain pros easily covers some cons and nitpicks

First pro to this mechanical mod goes for production quality. Everything made top notch and in the right way. This is Belarus quality. By-Ka quality

I like how FlexoPrint make their devices and i give a MAJOR pro for production quality

Folks, next pro will go for brutal, stylish and manly appearance of this mod

This mechanical mod is gorgeous and besides it's compact

And for this compact stealth size i will also give him a pro

Next pro i'll give for convenient and soft Fire button. It's pressed nicely, the spring is soft but you can feel that pressing. On the other hand it isn't bother you. So it's a pro

Next pro is also affects the button and it's regarding the button lock feature. The fact that there is a mechanical locking of the button is very good

Next pro i'll give for optional using different type of atomizers - both 22 and 23mm

It is good, i wish that there was also 24mm as well, but those 2 diameters is enough.

So a pro for option to use different atomizers

Another pro i'll give for adjustment options for height of the battery and length of the pin of your atomizer

It is convenient because there is different atomizers, different batteries and here you can use anything you want. But, of course, a gaps can left after

And last pro that i'll give to this mechanical mod is for performance. It's fully doing its job that it was made for by manufacturer

It works perfectly with MTL devices

There is no miss fire, there is no hard presses etc

This mechanical mod is perfectly deliver the voltage to the atomizer

But friends, there is some moments that you MUST know using this mechanical mod

First moment that we almost done discussing - it's the resistance which you can use on this mechanical mod

I will say it again. I DO NOT RECOMMEND using low ohm builds in here. Minimal resistance that i recommend using on this mechanical mod is 0.5ohm(zero five) and higher

Optimal resistance for me is 0.7-0.8ohm. So i get good vapor which is pretty warm and liquid is not overheating

So my optimal resistance on this mechanical mod is 0.7-0.8ohm

Another important moment - assembly of this mechanical mod into fully functional device

In this case the sequence is very important

For a start we screw in the atomizer and adjusting to the length of connector and only then install the battery and screw the bottom cover

Otherwise, if you make a mistake during assembly and install the battery first and then put the atomizer the fire button can stuck

The manufacturer himself points this out in User Manual, so please follow this manual and you won't get any troubles

Another moment - adjust and glow your atomizer on test fire stations

Or on regulated box mods, which will allow you to control of possibility getting short circuits and check your build resistance

Otherwise you can get a short circuit which is VERY bad for your batteries and for you as well

And last standard though important thing - use atomizers with nice protruding pin and you won't get shorts on this mechanical mod for sure

Please don't forget - this is mechanical mod, this is direct delivery of voltage from your battery to the atomizer

There is no any short circuit protection feature in this mod so you are in response for everything

You MUST know what you are doing before buying a mechanical mod

So it is important thing indeed

Okay folks. We've discussed all the moments regarding pros, cons and nitpicks

Now is the time to talk about price of this mechanical mod

On the official site mechanical mod with one connector either for 22 or 23mm will cost you 4789 rubles(which is 85$ at the moment)

But if you want to purchase another connector either 22 or 23mm you have to pay 676 rubles more(which is 12$)

Overall friends, i liked this mechanical mod. I liked it for its compact size, its capabilities and its production quality

If are the MTL kinda person and you want to have a compact device you should definitely pay attention to this mechanical mod

Because it have pretty reasonable price. On both external and internal markets there is a lot of mechs that don't have that features but will cost you more

But yeah, i wish that there was other color options but manufacturer make this device to match his other devices

And as far as i know there is no other color options planned. But i hope someday they will be available

That's all i wanted to tell you about this mechanical mod

I want to say big thanks to Sergey from Vape Systems for sending me mechanical mod for this review

I wanna thank you for your attention

Don't forget - in this corner we have a voting going - do you like this device or not(да-yes/нет-no)

Don't forget to leave a comment - what do you think about RTA / mechanical mod setup?

Subscribe to my channel and recommend it to your friends if they are vapers as well

And of course don't forget to push that Bell button to get notified when video is up

We'll see you soon

I wish you a delicious vape and let the vaping come into your life and stays there for long

Alex from VapersMD was with you

Vsem poka poka

For more infomation >> BATmod l by Vape Systems l ЛУЧШИЙ МЕХ ПОД MTL l ENG SUBS l Alex VapersMD REVIEW 🚭🔞 - Duration: 20:01.

-------------------------------------------

Guess the hero. Solo vs RodjER - Duration: 3:53.

Should I look at you or at the...

No, why at me, at the camera.

Ah, at the camera, okay.

[Launches into a maddened rage, the hero becomes spell Immune, resistant to magic damage, and gains increased attack speed.]

Sand King.

Nyx... Lifestealer.

Oh well.

[Emits shockwaves that damage and stun nearby enemies upon casting any abilities.]

Titan?

Aftershock, Earthshaker.

But he also shakes the ground!

[Rapidly fires a grappling device at the target location. If the hook hits a unit, the hero launches himself into the target, stunning and damaging it.]

Clockwerk.

Clockwerk.

[Reduces enemy armor, amplifying physical damage taken and provides True Sight of the targeted unit, revealing invisibility.]

No idea.

Slardar.

Ah, I didn't play him for so long - a forgotten hero!

[Ruptures the enemy's skin. If the unit moves, it takes a percentage of the distance traveled as damage.]

That's Bloodseeker.

Bloodseeker.

[Hurls a deadly shuriken at an enemy unit, dealing damage and stunning the target.]

That's Bounty Hunter.

Bounty Hunter?

The signatures have arrived.

A deadly shuriken!

[Hero's attacks awaken the Jingu Bang's power. Upon the fourth hit on an enemy hero, the hero earns four charged attacks that have bonus damage and lifesteal.]

That's too easy...

Monkey King, right?

Monkey King, yeah.

Jingu Bang!

The previous ones were harder.

I just knew all the answers beforehand; I've read the guide.

[Locks onto a target enemy unit, and after a few seconds fires a devastating shot that briefly stuns the target.]

That's way too hard.

Sniper.

Sniper.

[Launches an energy bolt that bounces around the map, striking enemies that are in vision and closest to the cast point. Each enemy hit beyond the first adds damage to the bolt.]

The energy bolt's damage...

On the entire map?

Launches an energy bolt that bounces around the entire map...

Well, this one is hard.

Damn, that's tough.

Let me think...

Guys, I have no clue. That's too hard.

Ah, that's Furion. Nature's Prophet.

[The hero opens a passage to the realm of the dead, emitting a slow aura that reduces enemy movement speed. In this form, he is unable to attack and takes amplified magic damage, but is protected from physical attacks and any health or mana regeneration he receives is amplified.]

Damn, that's quite a conundrum.

Unable to attack. What kind of a useless hero is unable to attack?

That was really descriptive...

And takes amplified magic damage... Life's rough for that hero.

The realm of the dead...

Which realm of the dead?

Ah, that's Necrolyte! I mean, Necrophos.

Necro...phos! Right!

Did you pick that from spell descriptions?

Heck, the questions were really difficult!

For more infomation >> Guess the hero. Solo vs RodjER - Duration: 3:53.

-------------------------------------------

My Youtube first income and Studio tour - Revealed - Duration: 12:31.

ready 1 2 3 yeah Wow so this is my room or my workplace what

you can say I just turn on three soft lights here from time this is also from

time I guess II time and this is also from a time and I just got this to flag

from euro euro zone you guys can know this is freedom if you live in Europe

you can travel all over the Europe without any problem is like your own

country and here I got some boxes okay this is the thing that I got from here

in Cologne from a game fair I went there and this is our phone boxes from Nokia 6

cents on xiaomi redmi note 5 then or note 5 + or 5 + then on our 9 I on our

7x xiaomi redmi 5 and this is the system guys that I use this is gtx 1080 and the

EVGA power supply 850 GQ and my stream pro something c9 2 to 0 and this is my

microphone guys and there is some other accessories that I put in the package

like this ok so guys the main main thing would be into this table guys so let's

discuss about this table a little bit and what I have into this table okay so

first we discuss about this one this is of course the fire alarm because it's

here mandatory here in Germany you have to put fire alarm every into every room

so that's really important and for you guys to please put fire alarm into your

house because it's really important and guys this is the streak that I took from

London basically so it took around 60 euros it means five thousand nearly five

thousand Indian rupees this stick only this stick okay

only this long stick took me that much and this is the blue et microphone

basically that I used to use for recording audio that's really amazing

guys it's a little bit bigger and this district microphone holder it's

basically you can put it onto your table here but I somehow managed to do this

thing here you guys can see and it's hold it here really good and then it

comes here when I make a video for unboxing or comparison video I put my

camera exactly into this position you guys can see okay because I'm shooting

with this camera right now that so I cannot show you for example my camera

stands like this like this here so it easily focused on here and for a dummy I

put a mobile phone here sometime i shoot videos from here sitting here and this

is the camera and this is some antique chair it's really expensive here in

Germany you guys can say I don't want to include that thing okay forget it

so okay so this is on the antique piece and I basically guys like to use this

kind of chair which has some air passing area you know why because I think you

guys have already faced this kind of some problem when you put your thing

down it's really so it is sometimes you know that's really feel uncomfortable

that's why I like to sit in the chair where natural air is coming so you know

breathe the gentle breeze o-m-g then you can do a really good work you know

everything is cool exactly that reason okay so now come back to my system here

this is my new family member from Acer core i3 7 generation with 128 SSD and I

think 4gb of ram and you guys can see there are many things here full HD this

is fingerprint sensor here 10 hours battery life

then touch design intelligence collar then hear Corning Gorilla Glass also I

saw some Aria Corning Gorilla Glass and there is some German rating you guys can

see and this is kirai kirai 3 7 generation yeah it's written like this I

focused on here okay so there's the laptop and this is my beloved mobile

phone that I use for my daily uses Samsung Galaxy s7 edge and you guys have

seen these Mobile's of course this is redmi note 5 or rate me five plus name

is different I told you many times and this is on r9i on a9 light and this is

on are 7/8 and this is Nokia 6 over here standard as the dummy and here my mouse

guys met head from Medicare and this is my monitor from Asus and this is my

printer from HP I guess and this is a SmartWatch

I bought from China it was really cheap but it works really really good it has a

SIM card inside it has a memory card inside it works perfectly fine and this

is my external hard disks guys Seagate to DV and this is a brother chantix ok

so now let's come into the main point here guys this is my big beast over here

my beloved system I basically took more than one and a half years to buy this

system and guys there is a story behind buying this system I had a laptop from

MSI which was really good laptop I bought this that laptop from Taiwan I

think you guys have always known because I told that

unboxing video of essa and that laptop been stolen from here somebody broke my

door then bla bla happened so I lost my DSLR camera then my laptop everything

then I decided to buy a computer because I need to make something different then

then then then I asked my mom mom please give me some money honey so mom give me

really not like good amount of money to buy this because it's really expensive

and I couldn't therefore that time I had really small job so I couldn't afford

this thing on my own guys so if I go deep into this system you guys can see

here if I little bit zoom here you guys can see Samsung 9 5 0 pro-v net SSD ok

this is something really really good its SD card and this is 1080 GD X 1080 okay

Reba blink of gamers okay and some motherboard from ga1 gaming this is the

RAM you can see guys ok Ram is also really good here and poor

shear and cooling system also here you guys can see fan is moving around and

EVGA I just show you the box guys and wow it's really good and there are some

switches guys you guys can say I can control many things from here this is

the power button and this is some other buttons lock this kind of stops and this

is something Boogle speakers that I use sometimes from a XP and if you go back

here guys you guys can see I can change the color

over here that's pretty impressive and this is a ya USB extender or splitter

you guys can say like this and yeah this is my lan cable connected to it Mouse

cable keyboard cable one bluetooth there are many things deep inside and it's a

full Tower guys if you see from here it a full tower case Wow so guys I'll try

to put all those things that I have and that I have just shown you I'll try to

put the link into the description below if you want to check for the old purpose

or whatever you can definitely definitely check it this is my another

microphone that are used for a couple of my videos this is all also really good

microphone from audio technica I'll make a video on that too really soon okay

so you can connect it to your DSLR or mobile phone or whatever so if you want

to start a new YouTube channel this thing is really good at the starter I

have this one when I started my channel and later I took this one guys who have

this blue 80 microphone that is really good it's a little bit bigger but for

permanent work for permanent thing you can really use it and if you go here

this is my background over here it looks amazing

sometimes I open my window and today is really sunny it's really difficult to

have sunny here in Germany and this is my city cologne you guys can see that

this is the big tower if you search in Internet cologne then you will

definitely find this picture this big tower picture into Internet so that's a

really cool thing here yeah that's pretty much everything I don't want to

make this video much longer because it's not going to yeah

port it so just come to the point okay so basically I recently got my first

Youtube payment and for that I can buy a onor

7 X no no no on a mine light when it comes for the first time in India so I

can BR leave I still I need to put some amount of money a little bit yeah a

little bit I need to put so I can almost buy a device in that is on our

nine light with that money and I spent it more than ten lakh of Indian rupees

or you can say fifteen thousand fourteen thirteen to fifteen thousand you rose or

something like that so this is a little bit crazy but it's okay and the thing is

I'll try to put all those thing into the description below so you guys can easily

check the price and if you need anything you can buy from them and if you go deep

down into my channel if you calculated the price from the phone that I bought

from the beginning of my channel when I have only hundred subscribers also that

time I also showed here the flagship devices from Samsung from HTC when I

made my first video HTC 11 I had only 40 subscribers or something like that so

when I have less than 500 subscribers I I really made the review of phone which

is flagship phones from different companies I'm really requesting you guys

if you want to check you can go deep down into my video list and you will

definitely find the full price if you calculate all this price and this thing

this thing this thing my camera and all I have it will blow your mind

literally so YouTube you know it's not that easy of course it's easy if you are

a comedian or something like that but if you want to make something bigger in

technical like these kinds of places it's really hey really wow you guys can

understand easily so guys thanks a lot and this is my little studio tool that I

told you promised you before that I'll make someday and I hope you guys liked

it and if you have any suggestion please don't forget to share with me okay and

don't forget to subscribe guys see you guys in my next videos till then take

care and peace in

For more infomation >> My Youtube first income and Studio tour - Revealed - Duration: 12:31.

-------------------------------------------

افضل انميات شتاء 2018 - Duration: 6:04.

For more infomation >> افضل انميات شتاء 2018 - Duration: 6:04.

-------------------------------------------

Synchronität von Psyche-Gehirn-Organ - Duration: 7:03.

For more infomation >> Synchronität von Psyche-Gehirn-Organ - Duration: 7:03.

-------------------------------------------

Top 10 Best Hotels In Dubrovnik, Croatia 2018. Best Luxury Hotel In Dubrovnik - Duration: 5:42.

For more infomation >> Top 10 Best Hotels In Dubrovnik, Croatia 2018. Best Luxury Hotel In Dubrovnik - Duration: 5:42.

-------------------------------------------

قوة التخطيط ◆ فكر على المدى البعيد ونفذ على المدى القريب ◆ الدكتور طارق السويدان - Duration: 18:03.

For more infomation >> قوة التخطيط ◆ فكر على المدى البعيد ونفذ على المدى القريب ◆ الدكتور طارق السويدان - Duration: 18:03.

-------------------------------------------

PERFORM GEISHA DI KONSER APACHE BLACKGOLD LAMPUNG HD - Duration: 17:22.

For more infomation >> PERFORM GEISHA DI KONSER APACHE BLACKGOLD LAMPUNG HD - Duration: 17:22.

-------------------------------------------

고퀄리티 돈코츠라멘 먹방입니다!! - Duration: 3:28.

For more infomation >> 고퀄리티 돈코츠라멘 먹방입니다!! - Duration: 3:28.

-------------------------------------------

Building DIY adjustable floating shelves with LED lighting - Duration: 5:22.

Today we build floating shelves for a tight niche in our house.

We build them in a way that they can be easily adjusted and removed - and we will integrate

LED light into one of the shelves.

We have this awkward small niche besides the chimney in our house that I would like to

use for storage.

One of the items that I would like to put here are systainers housing most of the tools

that I need to do everyday work around the house like hanging pictures or smaller repair

work.

The systainer is only a few millimeters smaller than the niche so I can't build a frame

to hold shelves and to make things even more complicated I would like to make the shelves

adjustable.

To get started I use hotglue and some thin strips of foam in order to get a template

of that niche.

Living in an old house we can safely assume that none of these angles is anywhere near

90 degrees.

From the form I take the angles and distances and cut shelves from 12 mm plywood matching

the niche minus a few millimeter.

If I would not want adjustable shelves I could screw a bracket into the wall and place the

pieces on top of these.

To make the shelves adjustable I create several excenter levers.

You can find a ready-made template on my website and I will add a link in the description to

another video where I explain in detail how to create such a lever design.

Four of these excenter levers are mounted to the sides by drilling a hole and securing

them with a dowel.

To distribute pressure more evenly I screw small wooden blocks to the board and hotglue

a strip of MDF to their outside so that both levers are pressing against the wood and do

not rub against the wall.

While the shelves would work like this the plywood edges don't look very pleasing.

As most of the furniture next to the niche is made from oak and pine I decide to edgeband

the pine plywood with a few scrap pieces of oak.

To give them a more interesting look I structure them with a small disc on a powercarving tool

before gluing them to the edge of the plywood.

Finally I give the shelves a light sanding and apply two coats of oil.

The shelves can now be put in place.

I hold them in place and start to tighten the excenters a little bit.

It is easy to adjust them up or down and make sure that they are level.

While the lower shelves are finished I would like to cover the excenter levers for the

upper shelves.

To cover the underside I will use 6 millimeter plywood with the edge covered by thin strips

of oak.

I drill a shallow recess in some small scrap pieces of plywood with the same thickness

as the one I used for the excenters.

Within that recess I drill two holes for small rare earth magnets.

Next I screw these wooden blocks to the shelf.

By putting washers on the magnets and a bit of epoxy on the washers I glue them to the

thin plywood.

This way the thin bottom clips easily to the shelf and is quickly removed.

If the distance between the magnet and the washer is too wide shim the wooden blocks

with some cardboard to ensure a good fit.

In one of the upper shelves I would like to display some stuff and would like to use a

spotlight to highlight it.

I bought a small LED light from amazon and cut a strip of plywood to the same thickness

as the LED light.

By cutting this piece in half I create a frame that is exactly the size of the LED light.

First I will use this template to remove most of the material with a drill and a jigsaw.

After the bulk of the material is removed I use a flush trim bit on the router table

to transfer the shape of my template to the shelf bottom.

After squaring the corners with a chisel the LED light can be pressed into the opening

and is hold in place by friction.

With the bottoms finished the shelves can be installed.

It is easy to adjust the position of the shelves which will give us a lot of versatility in

how we are going to use this space.

Working with excenters was really fun and it is impressive how much weight the shelves

can hold.

If you are interested in more project and jig building videos please subscribe to my

channel.

For more infomation >> Building DIY adjustable floating shelves with LED lighting - Duration: 5:22.

-------------------------------------------

How to disable popup blocker in chrome (For iPhone user) - Duration: 0:43.

For more infomation >> How to disable popup blocker in chrome (For iPhone user) - Duration: 0:43.

-------------------------------------------

Travel in Nepal(Trip in aviation museum)Kathmandu full video - Duration: 4:44.

Music

Music

Music

Music

Music

Music

Music

Music

Music

There it is

Let's search the way

Aviation museum man

It's great

Of course we can enter there

Music

So we are here recording

Music

thank you for watching make sure to like and subscribe

For more infomation >> Travel in Nepal(Trip in aviation museum)Kathmandu full video - Duration: 4:44.

-------------------------------------------

This is Why the Narcissist HATES Being Ignored - Duration: 3:43.

This is Why the Narcissist HATES Being Ignored

Narcissist really don't like being neglected.

For obvious reason, they live by sucking people's attention, affection, and care.

They also don't want others to pay attention to any other object rather than themselves.

They want all attention go to the narcissists.

However, what makes narcissists hate being ignored?

Is it because some strategies that people do when they know they live with narcissists

such as by ignoring and isolating them?

Though it is not a good move, people will keep that way to avoid the prolonged suffering

from narcissists.

Here is the reason why they don't like being ignored.

#1 - Narcissists demand attention

How can they earn attention if they are ignored?

If all people ignore the narcissists, they will absolutely have nothing to show.

They will get mad, and they just hate the situation.

Sometimes, they become so abusive to everyone nearby.

Thus, it is actually not ideal to ignore narcissists especially if it is a romantic relationship

and the other person is living in the same house.

#2 - They were ignored

Do you know that some people who become narcissists were actually ignored in their childhood period?

They saw people in front of her blaming each other and they saw their life being worthless.

That is why there are now trying to be the best people in this world.

They now perceive the world with them as better.

They want to be the best.

They do not want to be ignored just like they were in the childhood.

That is why they really hate being ignored.

They always try to be noticed.

#3 - They will not be important people

You may have learned on how narcissist demand attention.

However, it is also worth noting that they also want to be important people whom people

look up to.

They want to be leader and they want to be the central attention.

As far as they understand, they will never find leaders ignored.

Their vision will crumble once they are ignored and that is why they really hate being ignored.

#4 - They lose their energy supply

It is important to know that narcissists feed energy derived from people.

They suck energy from people who are close to them.

It is funny that they actually absorb people whom they love at first, and they just do

it for fun.

When they start being ignored, obviously they are mad.

They worry that their energy supply will be decreased.

It slowly will because not all people can be fooled into their trap.

Moreover, it is worth mentioning that people who are running away from the narcissists

usually will tell other people about the narcissists.

Thus, it reduces the chance for the narcissists to get another victim.

All in all, it makes the narcissists lose their energy.

Basically, narcissists do not like to be ignored because they cannot get what they want.

They also lose their sanity when they are ignored.

However, this can be a great trouble for people around them.

The reason is simply because they may do some abusive actions that eventually physically

hurt others.

It is not a good practice, and it is essential to be strategic in running away from them.

Well, that's some of the reasons why narcissists are hated to be ingnored.

Really cool information isn't it?

Please share your thoughts and experiences in the comments below!

Don't forget to subscribe to our channel and watch all our other amazing videos!

Thanks for watching!