Waching daily Feb 3 2018

Colors for kids. Learn Animals Name and Sound for Children - Learning Video Educational for Toddlers

For more infomation >> Colors for kids. Learn Animals Name and Sound for Children - Learning Video Educational for Toddlers - Duration: 10:10.

-------------------------------------------

prisons - Duration: 2:35:05.

For more infomation >> prisons - Duration: 2:35:05.

-------------------------------------------

NOVO MEME DO BRASIL - MEME #1 (LEIA A DESCRIÇÃO) - Duration: 0:36.

For more infomation >> NOVO MEME DO BRASIL - MEME #1 (LEIA A DESCRIÇÃO) - Duration: 0:36.

-------------------------------------------

Crazy First Dates Cray Cray Dating for Gen Z and Millennials Episode 6 - Duration: 4:35.

Um, I thought he was genuine. I kind of thought that was sweet. As he acted as if

there was nothing wrong. It got worse towards the end but nothing happened

crazy dates for a new generation of daters. Cray Cray

Kenishia see I have to keep it pg-13 but nothing happened but this guy he was

gorgeous okay like oranges nothing ever happened

between us but I thought he was genuine. And I was doing a shoot and he came and um

when it was over it was done he brought me to a restaurant I forgot the name of the

restaurant. I forgot the name of the restaurant. I was having a great time. It was beautiful. I was already dressed up because I was dressed

up previously. And we barely talked and

all he bought was appetizers. That was it. Like I didn't even have a chance to

choose what I wanted. He was like this is what we are going to get going get that and that and they were all appetizers. I was just like...ok... And then at the end, the thought he was going to get something else. And I was like. Not for appetizers your not.

I met up at a bar with somebody she was someone that I met online and he looked

not much like his picture he was the same person but I would add on at least

15 years lied about his height by a lot which I don't understand this because

I'm going to meet you anyway and the worst part of this he acted as if there

was nothing wrong like he looked completely different and he just acted

as if he looked exactly the same in the picture and he was also foreign and I

couldn't really understand anything he was saying so between the way he looked

the way he sounded I just wanted to get out of there it was terrible and answer

that he would not stop texting me and calling me I told him I wasn't

interested and then he started sending me pictures of his ex-girlfriend saying

that she's hotter than me against him I went to a restaurant and a guy he had to

keep telling me keep reminding me that he doesn't know me

I don't normally take him like I am really like you too

right I wouldn't be here if I don't like you I get it we're on a date could we

just like enjoy our time he just had to say it over and over in different ways

just let me know that I'm very lucky you're lucky girl keep going out with me

right now alright I get it and this will be the

first and last time little do you know Wow

eating my butt and then I think it got worse towards the end when a girl he

happened to know spotted him and she came over and he was like oh hey and

they got it so I come three 5-minute conversation I'm just there like okay

and he finishes it off didn't it introduce me by the way and then finish

it off by saying I was just my friend she's here with a guy that she's not

supposed to be you know here with she's dating kind of or something like Wyatt

so I kind of get where you say you don't normally do this maybe all all

you guys do this like go out and that supposedly fiend has a PC I don't know

it was just too confusing and I wouldn't go date with him again I don't talk to

him and never happen Brooke I met someone at school at college and you

know we were hanging out for there we got dinner and then you know he invited

me back to his room just to like hang out watch TV

and then he asked me to listen to music with him and I was like yeah let's

listen to some music he told me that he was a big fan of Katy

Perry and I kind of thought that was sweet and next thing you know the whole

entire soundtrack of Katy Perry just kept playing and playing and playing and

you know I love Katy Perry but kind of a turn-off for me it's kind of weird I

have to say that was the strangest state I've ever been on

cray-z dance for a new generation

For more infomation >> Crazy First Dates Cray Cray Dating for Gen Z and Millennials Episode 6 - Duration: 4:35.

-------------------------------------------

[Creative Commons Music] Jens East - Galaxies (feat. Diandra Faye) [Future House] - Duration: 2:37.

BreakingCopyright: Music for videos Free YouTube Audio Library

BreakingCopyright: Music for YouTube Free YouTube Audio Library

Today on BreakingCopyright: Jens East

No Copyright Music (Non Copyrighted Music) Jens East - Galaxies (feat. Diandra Faye)

For more infomation >> [Creative Commons Music] Jens East - Galaxies (feat. Diandra Faye) [Future House] - Duration: 2:37.

-------------------------------------------

RULES OF SURVİVAL GAMEPLAY 5 (TEPE SAVUNMASI)-ALT YAZIYI AÇMAYI UNUTMA - Duration: 20:19.

For more infomation >> RULES OF SURVİVAL GAMEPLAY 5 (TEPE SAVUNMASI)-ALT YAZIYI AÇMAYI UNUTMA - Duration: 20:19.

-------------------------------------------

ReadyBoost sous Windows (traduit) || (تسريع التطبيقات في الويندوز (مترجم - Duration: 3:21.

For more infomation >> ReadyBoost sous Windows (traduit) || (تسريع التطبيقات في الويندوز (مترجم - Duration: 3:21.

-------------------------------------------

6 Ways Of Creating A Successful Morning Routine - The Miracle Morning By Hal Elrod (Book Summary) - Duration: 7:34.

For more infomation >> 6 Ways Of Creating A Successful Morning Routine - The Miracle Morning By Hal Elrod (Book Summary) - Duration: 7:34.

-------------------------------------------

[Special] Ep. 3 - "WELCOME BACK! - WO3" | DYNASTY WARRIORS 8: EMPIRES - Duration: 13:13.

For more infomation >> [Special] Ep. 3 - "WELCOME BACK! - WO3" | DYNASTY WARRIORS 8: EMPIRES - Duration: 13:13.

-------------------------------------------

Far Cry 4: Testing on Intel Graphics 5500 - Duration: 11:18.

People talk, Kratos evil

We're here for a video of Far Cry 4

I hope you like it

I am testing on an Intel Graphhics 5500 video card

I'm playing in high quality

So give lots of Leg because of the recording

Because in high quality it goes more or less 20 fps

Only as I'm recording, it falls to 10 fps

It runs quietly in very low or low

On top it will not reach 30 fps

On at least the video card will rotate

I'll show you more things about how she reagerates certain things

Now let's get a car

And see how to stay the Fps

It's a nice and good car.

I'm not very good at the wheel

You then seeing this, folks.

Now let's test the Caticine of Far Cry on the video card

I'm not going to show everything

Well if the video is not too big

And the intention of the video is not to show the Mass of the Game

Now I want to see how I'm going to get out of here.

KKkkkkkk ...

How dumb am I, dude.

Now that I see the exit

Now I saw a Helicopter

The boring staff of Pagan Min

They do not let me rest, nor kill the beast.

I want to see if they're going to kill me at the top.

What a weak helicopter

Can not get up right

I'm going to be leaking from this helicopter.

I'll get my Wingsuit.

And get on the mission with style

How Much of King Min Guards

Boring guards

I just ran away from some and now I have got to kill many

And I'm screwed

This was the Video Card test

And thanks for watching this video and it's us.

For more infomation >> Far Cry 4: Testing on Intel Graphics 5500 - Duration: 11:18.

-------------------------------------------

Fatherhood - Call the Midwife - Series 7 - BBC First - Duration: 1:28.

Episode 2 was one in which a theme I'm quite keen on really bubbled up to the surface

which is the changing role of men in fatherhood

"We prepare our ladies for parenthood"

"but the fathers are left to their own devices"

"and are often quite at sea when baby's born"

"So I thought I might open the next session to husbands"

The Nonnatuns are trying to introduce men to the idea

that they can join their wives in prenatal classes and in postnatal care

which back then was pretty much a new idea

"My Allan would love to see his baby being born wouldn't you, Allan"

"Ah"

Another little funnier storyline for Winnie

is she knits all these boobs

for the mothercraft class

and everybody has to use them to practice breastfeeding

It's quite funny you know, nun knitting a boob

"Mine looks terribly realistic"

And then she decides that

it's a really good idea for the men to come to mothercraft classes

to learn how to support their wives

Learn about the breathing exercises

"In and out has always worked fine for me, sister"

"Sorry sister, he's such a joker"

And then she actually has a father in one of her births in that episode

"Goodness"

"Mr Romaine, you are doing well"

For more infomation >> Fatherhood - Call the Midwife - Series 7 - BBC First - Duration: 1:28.

-------------------------------------------

Movable wall mounted boom arm (redesign) - Duration: 11:10.

Today we're going to look at the failure of this moveable wall mounted boom arm bracket

and look at the failure reasons and come up with a new design.

Hopefully, one that works.

[Introduction]

Hi!

Harley here.

If you're new and are interested in making things out of wood, metal, electronics and

other similar types of materials, hit the subscribe button and then hit the bell notification

and YouTube will let you know next time there's something released here at the House of Hacks.

You know, sometimes you have a great idea, but the execution of it just doesn't work

quite right.

Well, that's what happened last summer.

I made a video up here about making a moveable wall-mounted bracket for this Impact 7' boom

arm that's used in a photography studio.

And the idea was we'd have a piece of metal that's mounted to the wall and this bracket

could be mounted anywhere along that metal to provide adjustability for where the long

arm boom arm is mounted.

The idea was there'd be a couple pins here that drop in to holes in the metal and there's

a cam activated lock here that keeps it from shifting around while it's being used.

There were a couple problems with this design.

First, of all, the pins that were epoxied in place in here didn't have enough depth

to them, into the wood, and so they fell out fairly easily.

The second problem is this cam lock is asymmetrical in the way that it was providing support.

The boom arm can swing to give you adjustability on your position of whatever you have mounted

to it.

And if you swung one way, this worked fine.

But if you swung it the other way, the whole mounting bracket would have a tendency to

tilt because it didn't have support on both sides.

So, in this redesign, I'm going to address both these issues.

OK.

The new game plan is to replace the pins that fell out with some bolts that will go through

the wood all the way.

The bolts are longer than this wood and so the bottom of the bolt will drop into the

holes in the perforated tubing that's going to be on the wall to hold it in place.

To hold the bolt in the wood, I've got some T-nuts that will just go in like so, so it'll

be flush on the bottom where it mounts against the wood, or against the metal and it'll just

be held in like so.

To lock it in place, I've got some toggle clamps.

These are inexpensive.

I picked them up on Amazon, a four pack for less than $9.

I was really surprised that I could get some this inexpensively.

And I'll leave a link to it down in the description in case you're interested in something like

this.

They're rated at 100 pounds each.

I'll have two, one on each side.

So that should be able to hold it in without any problem.

I'll cut a couple pieces of wood, this size, to mount on each side here to mount this to

and I'll set the spacing such that when they're open, there's enough room to drop it into

place and when it's closed, it will lock up tight against the metal on the wall.

So, let's start putting this all together.

[Project work]

OK.

After I got the bolts in and tried test fitting it in the holes, the clearances were just

such that there was a little bit more interference than I would have liked.

And so I took the bolts off and put them on the lathe and just filed off the ends of the

bolts.

(You can probably see it a little bit better with the contrast.)

So the part of the bolt that sticks out of the T-nut is filed off but the threads that

thread into the T-nut are still there.

So it will still go in just fine this way and, as this gets bottomed out and tightened

up, we can see there's just enough extra room for those to fit in there just fine.

So now I'll go put this back on the mounting bracket and figure out where the toggle clamps

go.

[Project work]

So, I mounted the clamp on the wood such that the fixed part of the clamp is fairly flush

with the end of the wood.

There's some adjustability in here so I wasn't looking for exact precision, just kind of

got in the ballpark.

And the bolts that are coming out of the T-nuts, extending beyond, is less than the total throw

of this bolt on the latch.

So, the difference between the closed position and the opened position is a certain measurement.

And that measurement is greater than the length of the bolts that are extending out the bottom

of the T-nuts.

So, in theory, I should be able to set one of these clamps in the locked position and

put it right up here against the perforated pipe and mark the block's position here on

the mounting bracket.

And when this is mounted in, when it's closed, it should be locked and when it unlocks there

should be enough movement to be able to pull the bracket up off the perforated pipes.

That's the theory.

We'll put it together and hopefully everything works out.

[Project work]

OK. I'm much more pleased with the way this works.

It's much more sturdy.

It seems much more secure.

I think it's going to work much better.

As you may have noticed, I was making some adjustments to this.

The way this works is there's a barrel that moves in and out in this bushing and in the

end of the barrel, there's a screw that has a rubber tip on it and a lock nut, so you

can adjust the length of the screw that's coming out of it with the rubber bumper on

it and then you can lock it in place with the lock nut.

And that's what I was doing with the pliers, was just kind of getting that tightened down

and adjusting that.

So now when you lock it in place, there's just a little bit of resistance before it

locks in and so it holds it pretty secure.

And I did that on both sides.

Like I said, these are rated on the web site at, I think, 99 pounds of force that they

should take.

So, both of them combined is 200 pounds and that should be plenty sufficient, I think,

even with the leverage that this will have when you put a light on it.

But we won't know until we really get it in place in the studio.

So, let's head over to the studio and see how it works in real life.

[Driving]

OK. That looks like it's going to work pretty well.

It's a whole lot more sturdy than it was before particularly when it's out on the outer edges

which is really where we had the problem last time.

Like I said last time, it would have a tendency to torque this base sideways when it was out

at the far angles and not having any problems like that now.

It's really, really good and solid.

So, I think this is going to work.

We'll now put it in practice here in the studio and let people use it and see how it works

in the real world.

Hopefully this will be the last time I have to address this issue.

Thanks for joining me on this creative journey that we're all on.

Until next time, go make something.

Perfection's not required.

Fun is!

For more infomation >> Movable wall mounted boom arm (redesign) - Duration: 11:10.

-------------------------------------------

YOUTUBE PRIVACY SETTINGS: Why You Should Go With Public Settings. Show in Creator Studio Community - Duration: 6:00.

G'day, and thank you very much for stopping by my channel I'm Aussie Mark if

we haven't met before, and in today's video I wanted to talk to you about

subscribers that you have on your YouTube channel. One of the things that I

find people are surprisingly not aware of, is that when you get your YouTube

channel up and going, the automatic settings as far as the privacy of your

YouTube channel is said to private and I guess that's how it should be because,

you know, some people may want to keep their activities on YouTube all to

themselves and you know you gotta respect people for that. However I find

that if you have your settings to private then when somebody that you've

gone and subscribe to somebody's channel and then they go on and have a look at

the subscriber lists that they have and they're not going to be able to see you

and if they can't see you they're probably less likely to interact with

you and it's always great as a boost for people

to see the latest subscribers on their channel and that's something that I

think we all appreciate and y'know, not everybody's keen to grow their

subscriber base, however it's kind of like if you're on YouTube you're there

because you want people to watch your videos so part of that is getting more

subscribers. So anyway, I thought I'd show you today just the basic how to change

your settings from the default private up to public. That way you can see

people's who subscribe to your channel. Let's go now to the computer and have a

look. So this is my channel as you can see, and now you can see at the moment

I've got 1529 subscribers, but I know for a fact that I've got at least five

today, so if we now jump over here to my creative studio and go over to the, where

are we, to the community and then down to subscribers

Okay, there we go. Now look, you can see that the last subscriber that I can see

on here was two days ago, but I know that I got at least five

people today because my numbers went up by five, so that means those five people

have all got their settings set to private and I'd really love to be able

to get to know you better and see you on this list. So how do you change your

settings? It's very basic and if you've already done this and know how to do it

well thank you very much for watching and I hope we see you on the next video,

but it or not, let's have a look at how we do it. So basically we just go

back up here click on the top right where your icon is and instead of

looking on creator studio if I'm the YouTube setting next to it. If I

click on that, you'll see that it's now opening up this screen here, and if I now go down

to privacy. Right! This is what I'm talking about. So at the moment I have

all of my likes and subscribes unticked. Now by default you will find that

all of yours probably ticked like that. So that means, if you haven't unticked

them then anyone that you're subscribed to can't see you and conversely

obviously you can't see anyone who subscribes to your channel, so I think

it's a good idea to keep them unticked. I've certainly had mine unticked for

most of the time I've been on the YouTube and it hasn't made any

difference to people invading my privacy in fact it's only enables people to see

me on their subscriber list and allows me to interact a little bit better and

to give a boost to the people who I subscribe to as well just by making them

feel well the opening see how that easy to like oh yeah it was Aussie Mark; that's

great. So that's how you do it that's all you need to do and then you click the

Save button down at the bottom and your settings have changed. Well that's about

it for today's video I just wanted to make that clear for those of you who are

new to YouTube or new to my channel and wonder if maybe you might like to

change your video settings so that if I now go back to my creative studio next

time your subscribe to my channel if I jump into the community again as I'm

just doing now, and down to subscribers I should be able to see you on my list

rather than just see people who already changed their privacy settings. Well, I'll

leave you with it and now thanks again for watching I really do appreciate your

time as always I hope that you're enjoying my

channel if you haven't seen any of my older videos, please feel free to wander

on back and they have a look at some of the stuff I've done previously. Oh, and

also I don't mention this very often but a lot of you may not be aware that I

have a Facebook page called Aussie Mark Flies Drones there's a link in the

description underneath this video and basically what I put up there is

interesting news items about drones that I've found and stumbled across in

various places I go to on the net, and you might find that interesting if

you're a drone person so if you like to hop on over there if you have a facebook

account and like that page, that'd be much appreciated. All right,

that's me. Thanks. Bye for now.