Hello, and welcome to Beaver's Hobby Channel.
Yes! I have found it!
I have found the way to use Mini-Z differential in WLtoys without having to modify it
like what I had to do before with the front one way.
Let's get straight to the point.
If you look at the diff from WLtoys and Mini-Z
you will see that everything is the same except the drive cups.
WLtoys drive cups are longer because the chassis is wider than a standard Mini-Z.
What you need are these universal shafts 10.5 mm from Atomic.
To install it is like installing any swing shaft (CVD/dog bones).
Take the wheel off.
Then pop the ball links.
Turn the knuckle like this so I can pull the swing shaft out.
Let's compare them to see the difference.
Here you can see that these new shafts are longer than standard WLtoys.
As for the differential you may remember that I had to modify the cup
make it work with WLtoys original swing shaft.
Now I can pull the spacer out because I don't need it anymore.
Then I can put it back in and use it normally with the long swing shaft.
While I'm putting everything back it I will tell you the idea behind this.
Actually there are many cars in this scale
one of the most popular is the Atomic AMZ.
Normally it is the same width as a Mini-Z.
But there is a kit to extend the suspension arms so the car is wider.
Actually Mini-Z AWD MA020 can do it to.
And that is where my I got my idea.
Because WLtoys is already a wide chassis
but it has the same swing shaft size as other 1/28 car which is 8.5 mm.
So it get round the problem of connecting swing shaft to differential
by extending the drive cup.
Now that I have longer shaft,
I can use any Mini-Z AWD compatible differential in WLtoys.
On to the next one.
If you remember in this side I had to not just shim the drive cup,
I also had to stuff the drive cup with a piece of plastic as well.
Now with the reason I explained to you earlier,
I don't need any of those anymore.
And here it is.
Now I can use front one way without any modification.
Let's put the wheel back in and see how this works.
Even I push the cup all the way inside it still works.
Do you see the these?
I don't need any of them anymore!
You may ask what does all this means exactly?
Well, it means that now you have tons of choices for the differentials to use in WLtoys.
Starting from with ball diff from Mini-Z, Atomic, GL.
Or the budget one from 3Racing and Sinohobby.
Then there are solid axle
and front one way from 3Racing for you drifters out there.
And on the front one way.
Now you can use front one way differential from Mini-Z and Sinohobby too.
You can use all of these and a lot more besides without any modification.
I have the link where I bought these shafts it in the description.
You can also find this universal shaft from an Atomic distributer near you.
I also have the links to the differentials I mentioned if you are interested.
And that's it for this video. I hope this is useful.
I will have another video with only me replacing the swing shaft
of both front and rear without any commentary.
It is going to be a bit long, about 25 minutes.
So you can watch me working on this car in entirety.
Please subscribe if you haven't done it yet to stay tuned.
Thanks for watching and see you again next time.
Không có nhận xét nào:
Đăng nhận xét