Waching daily Apr 24 2018

raising water is stunning and a magnificent expansion to your eating

regimen particularly to promote great liver well-being today's video will

discuss cleanse your liver in a few days with only two ingredients before you

watch this video please take a moment to subscribe our YouTube channel by

clicking the subscribe button then tap the Bell icon so you will be the first

to know when we post new videos daily your liver separates the poisons that

you experience expand and deliver lamentably in today's general public we

are immersed with harmful compound substances noticeable all around water

and even in our sustenance the liver cleans and refines the blood evacuating

all poisons and wastes items at the point when your liver is overburdened it

doesn't do that as viably as possible which abandons you feeling bloated and

tired purging and detoxifying her exhausted and overburdened liver is

essential for the recuperation of our organs and permits us to carry on with

an existence free from incessant infection raisin water animates specific

biochemical procedures in the liver that help detox your circulatory system all

the more successfully it's critical to discover raisins that have not been

treated with sulphur dioxide take a gander at your neighborhood well-being

sustenance store your nearby agriculturists market utilize darker red

grapes not seedless green grapes ingredients 2 cups of water 400

milliliters 150 grams of raisins preparation 1 place the raisins in jug

or container and cover them with the bubbled water permit to sit for 24 hours

to the following morning simply strain off the water from the raisins 3 drink

it on a void stomach directly in the wake of awakening at that point hold up

30 to 35 minutes before having breakfast 4 ideally you'll do this

few days in succession and during the evening leave everything arranged to

drink your raisin water the moment you get up the following morning Raisin in

water advances the isolation of stomach acids helping you handle your

nourishment better in retaining the supplements you'll start to see these

advantages around two days subsequent to beginning your raise in water regimen

keep in mind to take after this regimen for four days in any event you can

utilize this treatment once every month and it has no symptoms what do you think

of this important information let me know in our comment section below

if you liked this video give it a thumbs up and share with your friends for more

daily tips subscribe to our channel below thank you

For more infomation >> Cleanse Your Liver In A Few Days With Only 2 Ingredients | Natural Detox - Remedies One - Duration: 3:00.

-------------------------------------------

How to Turn a Bottle Stopper | Woodturning Project - Duration: 7:21.

Hi I'm Mike with Craft Supplies USA and today, we're gonna turn an Artisan Stainless Steel Bottle Stopper.

Here at Craft Supplies USA, we offer a wide selection of Bottle Stopper Kits.

They come in a variety of shapes and styles

and they all turn very easily.

Most of these bottle stoppers are turned using just a drill chuck and bottle stopper mandrel and that's what we'll be using today.

Before we start, I'd like to address a few save practices about bottle stopper use and wine storage.

Bottle stoppers are used for display purposes only and are not meant to store wine.

Once your bottle's open, plan on drinking it, because most wine will go bad within a few days.

And when you use your bottle stoppers, it's always a good idea to stand them upright for two reasons.

Number one.Even though bottle stoppers have a silicone seal to prevent leakage, not all bottle necks are created equal.

Most won't leak when stored on their side, but don't take any chances and

store the bottle upright if possible.

Reason number two. Wine will corrode the plated stoppers surprisingly fast, so it's a good idea to store those ones upright.

However, we do offer a stainless steel version that won't corrode.

Now that we've covered proper storage, let's go over the supplies needed to turn a

bottle stopper kit.

You'll need a bottle stopper kit, a bottle stopper mandrel and large bushing,

an 11/32" drill bit, a 3/8 tap,

a drill chuck with standard turning supplies

and a blank that's about 1-1/2" x 1-1/2" x 2" in size.

On this project blank selection is important.

Select a hardwood, an acrylic or a stabilized blank. I'll be using Cocobolo

because it'll be great for threading.

Now let's head over to the lathe and have some fun!

Prepare the blank for drilling by mounting it in your chuck

and setting the lathe speed to about 2,500 RPM.

True the end of the blank with a skew,

then create a dimple to help the drill bit center itself.

Now that the blank is prepped, let's talk about selecting the right drill bit.

If you're using a hardwood or an acrylic, pick an 11/32".

If your woods a little bit softer, use a 9/32".

Measure the length of the bottle stopper mandrel stud and add an eighth of an inch, then mark the depth with some tape.

Now slowly advance the bit until you reach the tape mark.

Now let's tap the thread. I find it easiest to leave the blank in the chuck for this process.

Use a wrench, or tap handle and advance the tap one turn, then back out a quarter turn to relieve the chips.

This technique is slow and steady process, but you'll produce the best results.

Just keep going until the tap bottoms out.

If you'd like more detailed instruction on threading and tapping, check out our other video, "Threading Wood and Acrylics".

Now mount the bottle stopper mandrel and bushing in the drill chuck on the headstock.

Thread the blank onto the mandrel.

Remember, the threads are delicate, so don't over-tighten it.

Now advance the tailstock with a sixty degree cone center for added support.

Set the lathe speed to around 2,500 RPM,

and turn the blank to round using a spindle gouge.

Don't forget to take light cuts here, because you don't want to catch

that could damage your threads.

Now turn the bottle stopper to your desired shape.

I really like traditional shapes, but this is all up to you.

And as for the bushing, it's just a sizing gauge so you don't have to be too

precise here like pen kits require.

Once you've got your desired shape, remove the tailstock and lightly turn the top of the stopper to its final shape.

Make sure to take light cuts here, because a bad catch could damage the threads.

I'll sand the blank through 600 grit with the lathe speed around 750 RPM.

This will help avoid heat damage from the sandpaper.

I'm going to apply a Waterlox finish to this bottle stopper, because

it's easy to apply and can handle a lot of use.

Start by wiping the stopper clean,

then unthread the stopper just a hair, so we can finish the bottom too.

Now apply a coat of Waterlox with a clean rag.

Wipe away any excess and allow one hour to dry.

Once the first coat is dry, apply a second coat,

wiping away any excess

and make sure to give this coat 24 hours to fully cure.

Once fully cured, use synthetic steel wool with some fine paste wax for a smooth, close-to-the-grain finish.

Now wipe the stopper dry with a clean cloth.

Carefully unthread the stopper and we'll finish it up at the table.

When threading my bottle stopper together, I like to use CA glue or epoxy

for a little more secure fit. It's not necessary, but I like my projects to last.

Apply a small amount of glue to the inside of the drilled hole

and slowly thread on the stainless steel bottle stopper.

Once the glue is fully cured, your bottle stopper is complete.

Now that it's finished, this bottle stopper is ready to use.

If you liked the video, give it a thumbs up and subscribe to our Channel.

Also, be sure to check out www.woodturnerscatalog.com for the largest selection of woodturning supplies in the industry.

For more infomation >> How to Turn a Bottle Stopper | Woodturning Project - Duration: 7:21.

-------------------------------------------

Shenmue I & II - Frequency - Duration: 2:19.

Get ready to search for sailors in HD.

The Shenmue 1 & 2 re-release is finally coming.

I'm Al Baldino, and this is Frequency,

from Turtle Beach.

Arguably one of the most ambitious games of all time,

Shenmue changed the landscape of open-world games

when it first came out on the Sega Dreamcast over 15 years ago.

Featuring a dynamic explorable world,

various mini-games,

fully voiced NPCs,

and quick time events,

Shenmue innovated many modern game features,

and led the way for other open-world games,

from Assassin's Creed to Sega's own Yakuza series.

The story of Shenmue takes place in 1986,

when Ryo Hazuki witnesses the death of his father by the hand of the ruthless and mysterious

Lan Di.

Swearing revenge,

Ryo searches for his father's killer, taking him from his home in Yokosuka, Japan

to Hong Kong, China.

Fans have been clamoring for a remake of Shenmue and its sequel for years,

and now new and returning players will have the chance to enjoy the complete Shenmue experience,

with some modern improvements.

The remake will feature fully adjustable screen resolutions and 1080p graphics,

as well as a revamped UI, and choice of classic or modern controls.

And for the first time, international players will be able to choose between Japanese and English audio.

Otherwise, the game promises to faithfully bring back everything that made the original game so beloved.

From epic martial arts combat to forklift racing

to asking strangers if they would like to play a game of Lucky Hit.

Shenmue 1 & 2 are set to come out this year for PlayStation 4, Xbox One and PC.

Do you have any fond memories of playing Shenmue?

Share your favorite moments in the comments below.

Me, I just want to go searching for all those things in the gachapon machine...

again.

Yeah, I gotta right this time.

Today's track is "Carlotta (Al Zanders Remix)" by Casino Time.

As always you can follow our soundtrack by following the show

For more infomation >> Shenmue I & II - Frequency - Duration: 2:19.

-------------------------------------------

How to Sew a Partial Zipper - Quarter Zipper - Duration: 3:19.

Have you ever wanted to create a fleece pullover but was unsure how to add the partial zipper

placket? I'll show you how do it in a few easy steps. Let's go ahead and get started.

First, I'm going to take my front bodice piece. This bodice is eventually going to

have a collar sewn to the top but it's not attached yet.

Measure your zipper that you want to insert.

Then measure your finished collar width. This means the width of the collar, minus seam

allowance. Mine is 2"

I'm going to subtract that number from my zipper length. So my zipper is 9" minus

2" which means I'm left with 7"

Now on my bodice I'm going to draw a line down from the center of my neckline that's

the length of my math formula so, in my case, a line that's 7".

Now I want to make a box around my line that's the same length but a ½" in width. So there

will be lines on both sides of my center line a ¼" away. So the total size of my box

is 7" long by ½" in width.

Take your bodice to your sewing machine and sew a straight stitch on all your lines, except

for the center line. This will reinforce the area for putting in our zipper.

Now cut directly on your center line but stop about ¼" away from the bottom and instead

cut to the corners of the box. This will create our placket.

Next you'll continue sewing your bodice together, meaning that I would sew the front

bodice and back bodice together at the shoulder and side seams.

Then I'll attach my collar to the neckline. The edges of my collar will begin and end

at my cut line on my front bodice.

Take your zipper and fold the top of the zipper tape over to the right side.

Baste each side of the zipper tape in place.

Unzip your zipper

Place the front bodice, right side up. Place the zipper right side down, matching the right

edge of the zipper tape with the left edge of the placket. The bottom edge of the zipper

should be at the bottom of your stitch box and the top of the zipper should be at the

top of your finished collar.

You'll notice that it doesn't look like my zipper goes to the top of my collar, that's

because when finished, the top half of my collar eventually goes on the inside of my

pullover. So, if I were to fold it, you can now see that the zipper will be at the top

of the finished collar.

Pin your zipper in place and then take it back to your machine and baste directly on

your reinforcing stitch again, so ¼" away from the raw edge.

Now, you'll take the other side of your zipper tape and repeat the same process with

the right side of the placket, pinning and basting in place.

So now my zipper is attached to the two sides of the placket but the bottom of the zipper

is still loose.

Flip your bodice to the wrong side and look at the bottom of your stitch box. You should

have a triangle shaped cut out. Pin this and the bottom of the zipper tape together and

then stitch this section only at your sewing machine.

Continue on with your garment construction but after you finish sewing your collar into

place, go back to the right side of the bodice, and sew a straight stitch around the three

sides of the zipper, giving you a finished look.

Now that the zipper is inserted, you can continue sewing the pullover and you'll be left with

a professional looking garment.

We hope you enjoyed this tutorial.

Please subscribe to get notified of our weekly releases.

Also, check out Professorpincushion.com to view our complete library with well over 350 sewing tutorials.

If you would like to directly support us, you can check out our patreon campaign and earn some exclusive perks.

Thanks for watching!

For more infomation >> How to Sew a Partial Zipper - Quarter Zipper - Duration: 3:19.

-------------------------------------------

Deadpool vs Ajax,Colossus vs Angel Dust | Deadpool (2016) Movie CLIP HD (+Subtitles) - Duration: 2:58.

(GROANING)

(GRUNTING)

(VANESSA GROANS)

Asshole!

(FRANCIS GRUNTS)

(GROANS)

(GRUNTING)

(EXPLODING)

(GRUNTING)

(SCREAMS)

Hang in there, baby!

Wade! I gotcha!

I got a plan. You're not gonna like it.

(GRUNTING)

Shit! Shit! Shit!

(VANESSA SCREAMING)

Don't worry. I'm totally on top of this.

(PANTING)

Ah! Damn it!

Maximum effort!

(VANESSA SCREAMS)

For more infomation >> Deadpool vs Ajax,Colossus vs Angel Dust | Deadpool (2016) Movie CLIP HD (+Subtitles) - Duration: 2:58.

-------------------------------------------

The 100 5x01 Inside "Eden" (HD) Season 5 Episode 1 Inside - Duration: 2:09.

(slow dramatic music)

- This is it.

We are all that remains of the human race.

- It's the season five premiere.

Still can't really believe we're doing this.

It's called Eden.

- Obviously we left these people in a precarious way.

There's a huge group of people underground in their bunker.

Obviously Spacekru is up there on the ring

and Clarke is alone.

We ended last season in a six year, seven day time jump,

but as we start this season,

we wind the clock back a little bit, a lot actually,

and we'll reveal how Clarke spent her six years alone.

- Hey, wash up, it's time for supper.

- This episode will tell the story of how they met

and how their relationship evolved.

- [Raven] Think we can do this without her?

- If we don't, she died in vain.

- We also will check in on our people in space

and realize that they had probably the easiest journey

of any of the, sort of, three rings of the circus,

because, frankly, there was nobody trying to kill them

and they were all friends

and they had plenty of food and water and companionship.

- Tomorrow I'll try again

to boost the signal from the antenna.

- Or we could just figure out a way to get to the ground.

- Bellamy, she worked on the fuel problem all morning.

- Six years and seven days.

- There's a reason why they're stuck,

there's a reason why they can't get down.

That is obviously starting to fray some of the relationships

and create a lot of conflict and tension,

mainly for Raven who blames herself

for not being able to get them down.

- I know that you're doing everything that you can.

(dramatic music)

For more infomation >> The 100 5x01 Inside "Eden" (HD) Season 5 Episode 1 Inside - Duration: 2:09.

-------------------------------------------

Hoe RUIM je OP?| RUST IN JE LEVEN | Psychologie Magazine - Duration: 5:16.

For more infomation >> Hoe RUIM je OP?| RUST IN JE LEVEN | Psychologie Magazine - Duration: 5:16.

-------------------------------------------

'Where's the Love for Richard?' Ep. 5 Clip | Silicon Valley | Season 5 - Duration: 0:42.

Where's the love for Richard?

That's-- I-- It just doesn't seem fair, that's it.

I understand.

Thank you. Yeah.

My emotion recognition protocol is detecting a wide range

of feelings, including...

-humility. -Nah.

-Self-loathing. -Well...

-Pettiness. Entitlement. -You know, okay.

-Immaturity. Megalomania. -Fiona... All right.

-Infantilism. Sexual inadequacy. -That's not true. Fiona, stop.

-Possible suicidality. -Shut up.

-A desire to self-mutilate. -Shut up. All right, stop, stop.

For more infomation >> 'Where's the Love for Richard?' Ep. 5 Clip | Silicon Valley | Season 5 - Duration: 0:42.

-------------------------------------------

Pulsar 2849 Review - JonGetsGames - Duration: 26:49.

For more infomation >> Pulsar 2849 Review - JonGetsGames - Duration: 26:49.

-------------------------------------------

sakht pareshani ka wazifa | Masla Hal Karne Ka Wazifa | Mali Mushkilat Door Karne Ka Wazifa - Duration: 2:18.

For more infomation >> sakht pareshani ka wazifa | Masla Hal Karne Ka Wazifa | Mali Mushkilat Door Karne Ka Wazifa - Duration: 2:18.

-------------------------------------------

The Goblet of Fire at Warner Bros. Studio Tour London - Duration: 1:52.

The Goblet of Fire was

one of my favorite experiences, and one of the

first drawings we got was a drawing of the Goblet of Fire.

Wood is such a beautiful material and a piece of wood like that and when you do

that too it dries out,

so it starts to move

and it almost starts

to split.

Initially we got a trunk of English Elm, pretty much the base of it, pretty much,

matched the drawing, so fantastic!

So we literally sharpened our chisels and

just went for it!

These are the taps that were used in

the Prefects' Bathroom

in the Goblet of Fire.

The individual taps are

all so huge aren't they?

I truly can't tell you where it

came from,

yeah, it was just a bit of fun really!

The challenge for doing the taps in the bathroom was that Dan Radcliffe had to

be in the bath while the taps were seen to be pouring in, so we had to build

separate tanks to take each row of taps, so we could recirculate each different

colour and at the same time not contaminate the bath.

All of the things that we've built and used in the film, a lot of them are

either 16 - 18 years old it's wonderful that we've managed to keep them this long.

What's amazing and really heartening is that they're now going into the Tour!

For more infomation >> The Goblet of Fire at Warner Bros. Studio Tour London - Duration: 1:52.

-------------------------------------------

Best Camera for Recording Speeches | Brighton West Video - Duration: 2:18.

- If you're a speaker you should be capturing

video of yourself presenting.

Maybe just to watch and improve

but also to start building a speaker reel

that you can share to get more speaking gigs.

In this video I'm gonna share the best

affordable camera that I have found

to record yourself speaking.

Just to be clear I'm talking about DIY here.

If you're serious about speaking you should

hire a professional to videotape you every once in a while

but you can capture a lot of your gigs yourself

and then hire a professional editor

to mash it all together into an impressive speaking reel.

The camera that I love for is the Canon VIXIA HF R800.

This is a camera that you set up on a tripod

in the back of the room and then zoom way in

to capture a closeup if you're talking at a podium.

Or you can zoom out and show the crowd size.

And if you have a helper, that person can compose

a bunch of different shots during one speech.

The R800 uses SD cards to record video.

The slightly more expensive R80 has some

built-in memory too, so if you're the type of person

that constantly loses small things,

that might be a better bet.

It has a touch screen display that pivots out

so that you can see and frame yourself

while the camera is running.

But I recommend having someone standing at the podium

or at the stage to frame the shot if you're on your own.

Just be sure to choose someone that's the same height.

The R800 also has an external microphone jack.

You an plug in a wireless lavalier

or you can even plug into the sound board

if you're using a microphone for amplification in the space.

I'll post another video about how to do that.

If you've followed me for any amount of time

you know that I love filming with the iPhone.

But I just couldn't figure out how to get

a decent speaking video with an iPhone.

It was either too far away and zooming made it pixelated

or it was looking directly up at me from the front row.

I also love how beautiful the video looks on my DSLR

but these typically have recording limits

of 12 or 30 minutes so it would cut off mid speech.

So that's why I love this guy.

I've got a link down in the description

if you're interested in buying a camcorder

to record your public speeches.

And if you wanna use YouTube to speak from

the world's largest stage, that's what I do.

I help coaches, authors and speakers

reach a global audience on YouTube.

Head over to my website to schedule

a free 20 minute phone call to see if

I'm a good match for your business.

For more infomation >> Best Camera for Recording Speeches | Brighton West Video - Duration: 2:18.

-------------------------------------------

The Power Of Sisterhood - Duration: 2:37.

Hi I'm Judy Machado Duque Author of Life Purpose Playbook and founder of

Productivity Goddess and in this video I'm gonna take you inside my sisterhood

circle so let's begin. Every month we gather together at one of our homes to

dine, to celebrate and to share challenges so that we can support one

another. Today's world as more and more women rise and become empowered to share

our gifts and speak our truth to find unity and unconditional support in a

sisterhood. I love the camaraderie I love the

success that each of us gets out of what we do in our lives not just our career

but just who we are and how we conduct ourselves and there's an acceptance and

a love and a sharing and a caring that I've never ever experienced before and

that's all what I like so much about our sisterhood circle group is the women

being a woman and growing up with a lot of sisters I don't have any brothers

just sister I learned how to appreciate women and the women this group is

absolutely gorgeous beautiful intelligent smart sexy they are super

women why because not only there is successful in their career and

passionate about what they do they also women the sensitive the beautiful the

expressive and to me I was craving for an environment like that. How can you

create your own sisterhood? Step 1 Make a list of some women in your life who you

admire and who are positive and empowering. Step 2

Contact them to let them know you're creating a monthly sisterhood circle and

ask if they're committed. Step 3 Make sure everyone understands the

agenda there are three things to remember everyone shares what's working

in their life then everyone shares a current challenge and after the group

gives ideas and support that person shares their commitment for the next

event to help them to overcome that challenge. If you decide to create a

sisterhood circle please come back to this video and share how it's supporting

you.

Here's to empowered women everywhere namaste

For more infomation >> The Power Of Sisterhood - Duration: 2:37.

-------------------------------------------

Wolfenstein II: The New Colossus – Rozgrywka na Nintendo Switch - Duration: 0:54.

For more infomation >> Wolfenstein II: The New Colossus – Rozgrywka na Nintendo Switch - Duration: 0:54.

-------------------------------------------

Hefner faces charges, including sexual assault - Duration: 2:10.

For more infomation >> Hefner faces charges, including sexual assault - Duration: 2:10.

-------------------------------------------

Prêt pour le baptême ? - Duration: 5:59.

For more infomation >> Prêt pour le baptême ? - Duration: 5:59.

-------------------------------------------

Top 10 People Who Are Living In 3018 - Duration: 6:13.

I've beeeen to the year 3000, not much has changed but they live underwater.

Wait….

You what.

Hello and welcome back to the Most Amazing Channel on the Internet, I am your host Rebecca

Felgate and today were are talking the Top 10 people straiiiight up living in 3018.

I am not if you have seen the memes floating around of people who are pretty forward thinking

and are therefore from the future….if you haven't….well…these people can teach

us a thing or two!

Before we jump into this video, I just want to let you know that we have a new channel

in our network called Fornite central – It is a totally fornite focused channel all on…you

guessed it….fornite.

If that's you're bag….

Go subscribe.

It's really big in 3018!

HOKAY, coming in at number 10 we have Chips with Chops

You know the eternal battle between wanting to eat flaming hot Cheetos and not wanting

to spend the day with a red cheesy spicy hand?!

Turns out it isn't an eternal struggle at all….it is a 2018 struggle.

By 3018, we have that figured out.

Check out this video Tomasslynch88 tweeted out My Boy @MilyMiltLu out here living in

3018….

Yep…he is eating those crisps with chopsticks.

9 - The inventor of this here machine We've been spending years dropping Jager

into redbull like chumps, in 3018, this is how they're doing jagerbombs.

It's science really.

The science of getting crunk!

Seriously though, do you think people will still be getting drunk in 3018?

Or will we have a new poison.

What toddlers wear in 3018….this….very much this it number 8

Like, okay so not only is this kid going to stay dry in wet weather, the also look chiq

as hell…… what a style icon.

I need me one of those.

I think I could rock it.

This outfit is pretty spinning top esque!

If you spin around fast enough in this getup, you might just like…..take off.

It's 3018 afterall.

She's only blooming cracked it at number 7

How to solve the monotony of a long car journey?

I Pads.

Sure.

But this woman has made her own built in TV in the car she is riding in.

What a visionary.

She is hands free.

Although in 3018 we don't have hands… just built in multifuctional robot arms…

not pictured.

6 - Peter the Icecream Eater In February 2018, Twitter User Haunter tweeted

a video of this man eating an icecream in the most unique way I have ever seen….

Its like a backwards suck trumpet.

Backwards suck trumpet.

Great band name.

Maybe they'll be headlining Coachella 3018?

Seriously though, what a revolutionary.

5 - Scotty Scooter Little Scotty Scooter isn't actually living

in 3018, he is from 3037 according to this tweet.

There he is….

Doing his thing, super cas.

There ARE plenty of seats on this train….

But if there weren't….

wait a minute… he is too casual and his scooter looks way too secure….

Maybe he is levitating.

Maybe that's a thing in the 3000s.

4 - Noodle Ned Noodle Ned, at it again with that 3018 behaviour!

What a guy.

Does he struggle with his noodles, twisting them around and around?!

Of course he doesn't.

In the 31st century we have solved that problem and the answer was hiding in the 21st century

all along…scissors.

Obviously.

This video has been watched over 2 and a half million times and retweeted 37 thousand times.

That many people have now seen a glimpse of the future but are still eating their noodles

the normal way?

Honestly, 3018 cant even help us.

Cake n bake at number 3!

I LOVE this 3018 problem solving creation!

It covers all the birthday bases!

1, it is a knife to but the birthday cake, two, it is a slice to serve it…and three,

it comes complete with matches to light the candles!

I bet it even came with candles too, they just aren't picture.

If it did, it would be a one stop shop to celebrations station.

Cake.

Urgh… now I am hungry.

No worries though….

Our foodie invention at number 2 may actually put me off my dinner….we have this 3018

way to eat Mexican.

Ingenious or disgusting, you decide!

Mevia Ergo tweeted…life hack : If you eat a hard taco over a small Tortilla, you get

a second taco.

I mean….taco droppings and drippings as the filling of another taco…it shouldn't

gross me out as youd just eat it of your plate anyway….

But it does!!!

It really does.

Okay, finally….

This is the most 3018 invention ever….

And these people are living it…at number one we have

Wearers of This Rubber Johnny Saying Rubber Johnny like it is 2003!

So if you aren't from the UK, you might not know that it is a condom.

But this isn't just any condom, it is a 3018 condom and anyone wearing this is having

some kind of futuristic adult fun.

Behold the smart condom.

This creepy piece o tech tracks thrust speed and velocity, calories burned, skin temperature

and more.

What more?

Well it can tell wearers their girth and how they perform compared to other people who

have the device.

It can also detect STIS such as Chlamydia and Syphilis.

Whaaaat!

So that was the Top 10 people living in 3018….

Who do you think was the most futuristic on this list?

Don't forget to check out Fornite Central.

Unbelievable people are still playing it in 3018!

For more infomation >> Top 10 People Who Are Living In 3018 - Duration: 6:13.

-------------------------------------------

Who Was The Smiling Man? - Duration: 3:23.

The smiling man is a well known story posted on reddit by the user Blue Tidal.

It details an encounter with a creepy, dancing man that crossed the path of a Seattle resident.

Based on the account, the author claims that the smiling man was a real person.

So who was he?

Or what was he?

Today, life's biggest questions asks, who was the smiling man?

Hello and welcome back to life's biggest questions, I'm charlotte dobre.

Don't forget to like and subscribe and let us know in those comments a question you have

always wanted to know the answer to.

For those who have never heard of the smiling man, here's a brief explanation.

The smiling man is a true story about a reddit user who goes by Blue tidal, that used to

spend boring nights walking around seattle thinking.

He did this for 4 years without fear, until one Wednesday night.

He was walking by a park.

As it was night time, no one else was around, until he turned a corner and went down a side

street.

He saw the silhouette of a man dancing a strange dance toward him.

Similar to a waltz, but the man finished each box with a stride.

As he got closer, the author could make out a strange, wide smile on his face.

His eyes were looking up at the sky.

He felt unnerved so he crossed the street, leaving the smiling man on the other side.

But when he looked back, the smiling man had crossed the street with him but was not slightly

crouched down and facing him.

He stood for a while until the smiling man started moving toward him, taking long exaggerated

tip toe steps like a cartoon characrer.

The smiling man began to speed up, He stopped, a car length away.

still smiling, still staring up at the sky, avoiding eye contact.

The author yelled 'what do you want', but instead of answering the smiling man just

smiled.

Shortly after, he turned around and started dance walking away, only to turn back around

and start running.

That's when blue tidal started running as fast as he could, to an area that was better

lit.

Blue tidal never went for another walk alone at night again.

Spooky right?

Its even better when you read the story or watch the short film 2 am.

So, who was the smiling man?

According to the author, the smiling man was a middle aged Caucasian man.

He had dark hair and he was between 6'2 and 6'5.

He was wearing a dark suit, black or charcoal grey, and it looked outddated.

He had no facial hair, and a slender face.

Not hansome.

Not ugly.

He had an intensity to his eyes, but never made eye contact.

And lastly, he had a wide, ear to ear smile glued on his face that seemed almost inhuman.

What possible motivation could he have had for wanting to scare someone else?

The author, who doesn't believe in the supernatural, said the smiling man must have been an insane

person.

But the way he moved around seemed somewhat otherworldly.

The author also claims to have had several dreams about the smiling man following the

encounter, but he believes they are unrelated.

Since the original story was posted several years ago, others have come forward with similar

tales of encounters with beings that resembled the smiling man.

Tall, slender, doing a creepy dance and staring at the sky. and of course, smiling.

According to one encounter, who got extremely close to him, The smiling mans' breath was

cold.

Ice cold.

So who was the smiling man?

Maybe he was just a regular dude, getting a kick out of scaring people.

Maybe he was mentally unstable, maybe he was under the influence.

Maybe we will never know.

For now, I'm charlotte dobre and you'e been watching life's biggest questions.

For more infomation >> Who Was The Smiling Man? - Duration: 3:23.

-------------------------------------------

DIY Magnetic Bookmarks ~ Easy Paper Craft - HGTV Handmade - Duration: 5:31.

Hi guys, I'm Karen Kavett welcome back to HGTV Handmade.

Today we are making magnetic bookmarks that look really cute, don't damage your books,

and won't fall out in your bag.

First up we're going to make a really simple minimalist bookmark.

Cut a rectangle of colorful paper and fold it in half.

Then grab two small magnets.

Tape one of them to one end of the rectangle.

Press down the tape and cut off the excess.

Then place the other one on the sticky side of the tape and stick the magnets together.

Fold the other half of the paper on top, and the second magnet should now be taped to that

side.

Once again cut off the extra tape and that's it.

We've made a really simple, minimal bookmark that will never fall out of your book no matter

how loose the pages get.

Now let's take it up a notch and make an arrow so you can remember exactly where on

the page you were.

Draw an arrow onto scrapbook paper and then fold the paper in half.

Cut it out so you have an arrow with a really long tail.

Then just like before, tape your magnets into place.

And now you can mark your spot in your book so you can always pick up exactly where you

left off.

These are really simple and they don't get in the way so you can bring them with you

no matter where you're going.

Next I also wanted to make fun decorative ones that will look really cute on your desk.

To do this, just draw your shape, I'm doing a cactus, but make sure that the fold is on

the top of your shape.

Cut that out and fold it back the other way so the color is on the outside.

Now tape your magnets in place on the bottom.

And then to get rid of this big gap here, use a glue stick to glue the top of the shape

together so just the magnets on the bottom can open and close.

And that's it.

I think this looks so cute and it's not going to damage your book one bit.

So you can get really creative here.

I decided to make a whole succulent garden.

You can also be playful with it, like I did with this mermaid tail diving into the book

pages.

Or you can make any shape you like, maybe something as simple as a heart.

I think these look so cute on your desk, whether you're actually marking a page or if you

just want to turn your books into decorations.

I feel like every time I cut up a book for a DIY everyone gets so mad, so here you go,

this is one where we're not hurting the books at all, we're just making them look

even cuter.

So I hope you guys liked that project.

But if you're still watching the video all the way to the end I want to know what was

the last book that you read.

Tell me what it was called, what it's about, and whether or not you liked it.

Because I always need new book recommendations.

I am so behind on my reading.

It's really embarrassing.

So give me some new books to read.

So make sure to like this video and subscribe and I'll see you guys next time.