-------------------------------------------
Liên quân | Chiến thắng đầy ý nghĩa bóc bim bim Swing thành công đến từ Over Clocker - Duration: 20:40.
For more infomation >> Liên quân | Chiến thắng đầy ý nghĩa bóc bim bim Swing thành công đến từ Over Clocker - Duration: 20:40. -------------------------------------------
Must watch funny videos 😂 NoN stop comedy Videos || try not to laugh challenge P107 - Duration: 4:04.
NoN stop comedy Videos
-------------------------------------------
I tension up the spoke of Ultegra, shaking was terrible, I try to remove a shake - Duration: 22:04.
Hi touTube Hi everyone Hello Welcome to Animal Land
I toled you last time
This Ultegra wheel
I will up the tension of the spokes
There is a wheel maintenance tool here
various Because there are serious things
Spoke tension up is nervous.I will do my best and try.
Let's get started!
I will set the tires of the road bike
OK, I set it
Raise the arm
Close the gauge
Turn the wheel
I have been riding this Ultegra wheel for two years.
The distance is about 7000kilometers
I have not run out
Because it is not swinging
one more
I will check the tension How about that
Whether the tension is weakened or not This tension meter
I bought it although it is a cheap guy I will measure with this
Look at this
I downloaded it from this web
It is the tension value of Ultegra's spokes
The front desk is 100kgf to 140kgf Kilogram, force force
It will cost that much.The upper one is Newton
Since it is 100kgf to 140kgf
This spoke
This is confusing.Measure the tension of the spokes like this
It is 38 when measuring the tension.
In this conversion table, 38 converts the number of tension.
Notice the size of this spoke.The child's spoke size is 1.2 in 2.3.
The longer is 2.3, the thinner is 1.2
The value we measured is 38.Somewhere
As I look at the 38 rows sideways ... 104
Tension is 104? Is it different 116? It is different!
I did not understand
38
1.2 in 1.2 is ... 101
It is currently 101 kgf.100to 140kgf is the lowest value since it is recommended
It was a number measured only for one
In fact, we have to measure them all and use the average value
I calculated the average of all the measurements
It is 38 after all It is 101 kgf
Tension is low
It is low, but it is within range.If you raise it up to 140kgf it is tight
It will be a solid wheel tight wheel
Loosen ... Since spokes are like shock absorbers
It gets softer when loosened, and becomes harder when stretched strongly.
You can choose whether it is soft or stiff.
It is ok from 100to 140, so it is the softest setting at present.
That state
It is ok as it is I want to tension up a little bit
So, I will do a little tension up
A dedicated wrench is attached to the wheel of Artegra
The wrench for the spoke is the one this is turning
On the other side you can set the direction of the spoke so that the spokes do not turn together
Blade type is horizontally long and thin, aerodynamic performance is improving
We will use these in this way
First
Put a wrench on the spoke club.Another wrench holds the spoke so that it does not rotate
In this state
Turn spoke club
When tensioning up, measure not just one place but all spokes before tightening
Since the spokes are pulled from both sides, they are one set in both
Both are equal.So, if you tighten only one side it will be biased
We need to tighten both in the same way
First of all, I will tighten 90degrees all round
This work is serious if there are many numbers.
Next, I will check the whole tension
Make sure the tension is the same.Tighten the weak tension, loosen the strong one
We will make adjustments like this
OK
The adjustment is over
I removed a tire
First of all we remove the vertical runout.
In this way the tool will use the arm under the wheel
In case of pitching, where to hit
The separation will be repeated
Close the nipple when you want to release the point of hitting
It's simple.Tighten here as it hits here
On the contrary, if you can not fasten it, loosen the place you are away from
I will adjust that way
OK, we will adjust from where we are hit hard
In this case the place I am hitting here
this place
this place
This position is not it
In this case I will tighten here and here
In the case of ARTEGRA, clockwise turns tighten.It differs from other types
Usually, put the nipple from the back, insert the spoke, turn the nipple and pull the spoke
Nipple sticks to the spokes and pulls the spokes
The screw is cut in the wheel. Because this is included, turn it to the opposite side
So please be careful.I worked without explanation before.
In case of tightening, turn it like this.I turned around 45 degrees now
Please be careful not to rotate it at once
Especially since there are few errors now
I will not do it at once when the error is small.
This alone does not hit here
With this feeling The pitch of this part was fixed
OK, That's it I also do other places
I am hitting here as well, so I will also tighten here
OK, I got hit
Without this one lap all the way how is it
I wonder if it still runs out? I run a little.
Keep the gauge closer and repeat the work
OK
I think it's good
Vertical runout was removed
Next we will eliminate the side runout
Please look at the previous movie to remove lateral run out
How about it, OK? I'm going around with a nice touch.
It is easier to remove the tires here
Especially the speed of rotation is also high,
Speed also comes out, so I will just firmly maintain it with the wheel
Then I will use the center gauge.
What is the center gauge tool to do?
First, I will explain what it is like
I will check if the rim is in the middle of the wheel
Compare these two places and check if they are the same.
I think that there is a high possibility that it is misaligned because it has been tensioned up
Three points are brought into contact
Check on the other side
Please look at this.do you understand
I am out of alignment
We will strengthen the tension of this side spokes
I will tighten little by little
Here we will tighten only the spokes on the upper side by about 90degrees
OK I will check again.
Again check the other side to match the face
It fits well It's almost ok, I'm in touch with all three
I became a center.
When becoming a center
After all, I became a center
I changed the spoke tension
It is necessary to remove the runout
It may be misaligned. Let's remove the runout
Do not you think it is quite a steady task? It is work that gradually gets little by little done
I am glad that this is not misplaced
OK, I'm out of control!
It's quite a misplaced
From here we will remove vertical runout
Currently we are eliminating the side runout.After this, check the longitudinal runout and then the lateral runout again
I will proceed like that
OK It went well
Then, I will check the center once more as before.
It has not changed so much ago
OK
I am in contact.It's okay
It was completed.Tension up of Ultegra's wheel is completed
It was pretty bad.
Unlike at Mountain, not only did it remove the runout, but it also increased the tension
I changed the tension of all the spokes
Then it will be unbalanced.I have shifted both vertically and horizontally
Adjusted in order of vertical, horizontal, center, vertical, horizontal, and center
And it is done.
I think that it will take time if you do it slowly
OK, this time it is over
Those who say it was interesting this time it became helpful Thumbs up Thank you
Thank you for your interest in registering your channel.Thanking you in advance
OK, Bye!
In Animal Land, various other videos such as this and such delivery are surely watching Please give me
-------------------------------------------
比較感性的輕信別人，過於顧及別人的三大星座 - Duration: 4:20.
For more infomation >> 比較感性的輕信別人，過於顧及別人的三大星座 - Duration: 4:20. -------------------------------------------
二樓是怎麼的？ ／ Introduction of Everyday Gyoda's second floor ／ 二階はどんな感じですか？ - Duration: 4:09.
Hi everyone, Steven again!
I am now standing on the second floor of Everyday Gyoda store.
This time I will show the surrounding of 2/F to you!
Like before,
I will walk around this floor.
Let's feel it together!
So...what do you think?
I feel I got lost again.
How shame it is...got lost in a same place twice...
I want to take back my words.
This place is actually bigger than I think!
I have to spend 2 to 3 mins to walk around the hold area.
So it's not small.
Besides there are tones of claw games and those are really concentrated.
If you like to play claw game,
you might not want to leave this place!
Okay! Let's talk about a different thing in 2/F.
1/F doesn't have this thing.
um....kind of special... (may be)
which is....
This is what I want to introduce.
There are a rest place in 2/F.
You can also eat or drink in this area.
A vending machine is just nearby. So you can buy a drink
and take a rest right here!
If you are tired after long time playing,
this is the best place to you!
There are also another one on the other side.
Let's see!
So here is the other one.
One thing different is...
This area is not allowed to eat or drink.
No food or drink in this area~
So if you want to taste something, the last place is better!
But you can buy more things in this side.
such as bread...
and...snack...
also drinking.
Here is a really good place...
is a...oh yes! is a considerate place for people!
This time I will stop right here.
Next time I will go though some claw games in 2/F
Please like this video,
and comment below.
I will see you next time. Bye!
What's coming next...
You might wonder "Why this time is so short?".
This's because I have to prepare to talk about...
this one!
The extremely famous claw game in this store.
Why is that?
You can find the answer in this next video. Bye!( 〃´艸`)
-------------------------------------------
Two Koreas holding high-level talks to implement September's summit agreement - Duration: 2:22.
now as mentioned the two Koreas held their fifth round of high-level talks of
the year today at the truce village of Panmunjom and they've issued their joint
press statement just now for the details of that let's connect live to our
Unification Ministry correspondent or jung-hee who is standing by at the
office for inter-korean dialogue young-hee what's in the statement Devon
a slew of action plans for South and North Korea once again and a number of
dates set for various inter-korean talks let me just walk you through the press
statement well first of all most importantly the two Koreas are holding
the groundbreaking ceremony that marks the construction work for connecting the
railways and roads on the eastern and western side of the peninsula and that
is happening for real at the end of this year well Seoul and Pyongyang signed off
on holding that ceremony in late November or early December and that
means they are going to start the construction they will be conducting
joint inspections on the Western railroads starting later this month in
the eastern railroads early next month they will be exchanging documents to
coordinate on road inspections as well in a series of inter-korean talks will
take place later this month at the Kaesong joint liaison office on forestry
cooperation medical care and sports exchanges those will cover controlling
diseases and pests modernizing tree nurseries preventing epidemics in
forming joint teams for the 2020 Summer Olympics while launching a joint bid to
host the leadly 2032 Summer Olympics Seoul and Pyongyang will also be holding
Red Cross talks next month at North Korea's Mount Kumgang to discuss opening
a permanent facility for warned families to meet as well as enabling video
meetings and the video messages generals from the two Koreas will also be holding
talks as soon as possible to discuss running a joint inter-korean military
committee that works to see facilities at the demilitarized zone meanwhile
Seoul and Pyongyang will continue communicating to fine-tune the details
for a North Korean our troops concert in Seoul this month is something that was
fixed for sure through the summit agreements last month that's all I have
for now but I'll make sure to have more update
for lehre news casts as much as as harsh unification Minister is briefing the
reporters about the details of today's press statement Devon
-------------------------------------------
Bodies of five Korean climbers found dead on Mt. Gurja to be brought back home - Duration: 1:31.
Now the latest from the tragic climbing accident in the Himalayas....
The bodies of the five South Korean climbers who were found dead on Sunday have been retrieved
and now the South Korean government is working on how to bring them back here.
Hong Yoo has the details.
The bodies of five South Korean climbers who died in the Himalayan mountains will arrive
back at Incheon Airport on Wednesday morning.
The climbers were on an expedition to make a new trekking route when their camp on Mount
Gurja was swept away by a strong storm.
The weather conditions made it difficult for the two rescue helicopters which were sent
early Saturday to look for the missing people.
On Sunday when the rescue helicopter finally managed to land, the five South Koreans and
four Nepalese guides were found dead near their basecamp.
The bodies were then moved to Kathmandu, the capital city of Nepal.
At the moment, the families of the deceased are having difficulty getting plane tickets
to Nepal since it is the trekking season in the Himalayas.
So, rather than cremate the five bodies, the Korean Embassy in Nepal and the Nepalese government
are planning to embalm the bodies and transport them to Korea.
The bodies should depart from Kathmandu on Tuesday 11:50 pm local time and arrive at
Incheon Airport around Wednesday 5am local time.
Meanwhile, a quick response team from the South Korean Foreign Ministry will head to
Nepal on Monday afternoon to provide administrative assistance when transporting the bodies.
Hong Yoo, Arirang News.
-------------------------------------------
Tip 45: Choose a multilingual channel model for YouTube | 50 tips in 50 days - Duration: 1:00.
For more infomation >> Tip 45: Choose a multilingual channel model for YouTube | 50 tips in 50 days - Duration: 1:00. -------------------------------------------
3 Bedroom House Speedbuild || ROBLOX : Bloxburg - Duration: 12:49.
lol u look like a table
u smell like a caterpillar
watch out for Christina, she likes to sniff ducks
Không có nhận xét nào:
Đăng nhận xét