Gizzard al Ajillo♪ ～How to make Ume Plum Wine～
This time, I am going to make ume plum wine.
And I make Gizzard al Ajillo for a side dish of ume plum wine called "Umeshu".
It's very easy to make.
And it's delicious, so please try it yourself.
Make ume plum wine.(I made this video one year ago)
Wash 1 kg of ume plum lightly.
Soak into water for about 2 hour.
Wash well.
Dry it in the shade for about half day.
Pry out the stems of each ume plum using a bamboo skewer.
Put in a washed bottle which was sterilized with boiling water.
250 g of rock sugar.
This ume plum wine is very light on the sweetness.
If you have a weakness for sweets, add more sugar to taste.(Add 300～500g)
Pour 1800 ml of white liquor called "Shochu"(焼酎).
If you use alcohol containing 20% or less, you may be punished under the Liquor Tax Act in Japan.
Keep in a cool dark place.
After 1 year.
Especially smells good.
Enjoy ume plum wine on the rocks!
Refreshing sweetness is so good!
Make Gizzard al Ajillo
Remove the yellow thin skin from gizzards.
Put a lot of coarse salt and rub well.
Leave it in a colander for about 20 minutes to drain the gamy odor.
Prepare the other ingredients.
Mince 2 pieces of anchovy fillets.
You can use a pinch of salt instead of anchovy fillets.
Put remaining anchovy fillets into a glass jar with an air-tight screw top.
Pour some olive oil.
Remove the core from a clove of garlic.
Remove the seeds from red chili pepper.
Cut some mushroom into thick slices.
Drained the gamy odor.
Rinse them with water and pat dry.
Slice off the white skin like part on the outside.
Cut the both ends of gizzards.
Make 2 or 3 incisions.
The outer silver skin is delicious and can be used for other dishes.
Heat up a frying pan without adding any oil.
Press down with a spatula to cook them lightly.
Sear it lightly.
Cooking.
Put some gizzards into the Cazuela.
Minced anchovy fillets.
Mushroom.
Garlic.
Red chili pepper.
Pour pure olive oil over ingredients till just covered them.
Cook on low heat.
Once it comes to a boil, cook on low heat for 7～8 minutes.
Make ume plum wine with soda.
Sprinkle some dried pasley.
It's ready to eat♪
French bread is baking.
Cheers!
Enjoy ume plum wine until Ajillo is cooled to a certain degree.
This ume plum wine is very light on the sweetness and delicious.
Please Subscibe Soon!
Chicken dish↖ ↗Oyster al ajilo
For more infomation >> Gizzard al Ajillo♪ ～How to make Ume Plum Wine～ 砂肝のアヒージョと梅酒の作り方♪ - Duration: 5:43.-------------------------------------------
Загадка для детей ! Угадай-ка если сможешь! - Duration: 1:29.
He runs along a thin rope
Then he will go into the bottle
And fire appears
What is it?
Write your answers in the comments
-------------------------------------------
Anet A8 3D Printer Desktop / DIY Kit Review and Build - Duration: 18:58.
I was sent an Anet A8 3D printer by Gearbest.
It's a very affordable Prusa i3 clone.
I've always wanted to make a 3D printer, but it's been a little beyond me.
I had tried to build a delta with Nathan from Opentronic back in 2013, but we got stuck
with the software and an alternative interest in brewing.
I think my understanding of CNC has dramatically improved since I've built my own machine
and controller, and this machine comes with several instruction manuals.
Anyway I'll start with what's in the box.
On the top, you've got the linear bearings, some plastic bits, a massive bag of machine
screws.
There's some wires, the heat bed.
That must be a heat sensor there.
Another bit of aluminium.
Also a few tools.
Some more wire, and a plug which the wire seems to have actually melted onto the polystyrene
- interesting.
The next box has some of the larger acrylic parts.
There's a handful in there.
Got the display, in a nice box.
Looks like it could have some soap in there.
Got the main board here.
I don't know what version this is or what it's running.
There's also a timing belt, USB pen, USB cable and heat sink.
And in the bottom you've got the rest of the components.
Acrylic parts, cable chains over here, you've got the stepper motors which have been pre-assembled.
The heating element for the plastic, you also have some machined threaded rods, some look
like trapezoidal and the rest look normal.
And there's some straight bar at the back.
There's a fan.
These are the bits.
Ok that's interesting, this hasn't been 3D printed.
I'd also asked for a sensor, a bed levelling sensor which actually came broken, but I'll
be able to glue that back together.
with some dichloromethane.
They also sent me some filament.
I asked for PLA just because it's easier to work with, you don't need to heat everything
up as much but they sent me ABS instead.
I also asked for red.
I wanted China red but they sent me UK grey.
Ok I'm not going to tell you have to assemble this because there' so many videos doing that.
I'm just going to get on with it and show you some of the stages which maybe useful
for you to see.
I may come back and put washers on these.
I just put this piece on here, and I'm going to do the other side of it now.
I'm going to put a bit of machine grease in there.
Defiantly going to unscrew these and square it all up.
I'm pushing it that way.
I've managed to break the snips that came in the box.
Ok I did do a bit of research about this machine, and one of the things I did notice was the
contacts terminals here.
The plug that fits onto it here is a well known point of fires.
What I might do is use shielded terminals or maybe get some fibreglass shielding or
sleaving, and cover the wires up after I've soldered them directly onto the terminals
that I need.
But I'll save that for another time.
Ok a week later, I'm just going to make sure the belt lines up so the pulley's been put
on quite to one side, and it doesn't look square.
I've got some flanged head machine screws.
These are just a little bit wider than the machine screws I've been sent - the mushroom
head ones.
I think they will actually hold a bit better.
They are a little bit shorter.
16mm instead of 18mm but they still hold the nuts.
So I'm just going to do the rest of what I'm working on.
Ok I just went and had a break, watched some socialist meme caucus and then it all suddenly
clicked into place.
There's a grub screw in there and I couldn't see it because this area isn't well lit.
So I've just undone that a little bit.
This is what happens when you don't read the manual or pay attention.
And that goes straight in.
The thing I don't get with the heat bed is they haven't used insulated fireproof wire.
But for the other heating element here, they have.
Which is what you're meant to do.
I anticipated this so I bought fibreglass insulated wire which I will replace on the heat-bed.
I'll secure that on this.
I'm jumping ahead after putting the extruder and belt on the gantry.I just managed to break
the...
I managed to break the stainless steel Teflon pipes which connect the heating element and
feed the filament.
There probably should be a couple of these in the box but they are quite cheap to replace.
Just don't over tighten them when you are at this stage of the build.
I'm going to carry on and replace the broken parts when I get it.
Make sure the wire comes out the groove so you don't pinch it.
I've put the display panel on.
You can see I've got a nut between the circuit board and the back panel, just to space it
out and the plastic doesn't put against there.
I've made the spool holder and added a few of the wires.
But I can't really do any more until I get the 8mm stainless steal filament tube
that I broke.
Obviously I just over tightened it but I am getting another one in the post and it's a
few dollars or quids.
Ok so the last thing I'll do before putting everything else away, is fix the bed levelling
sensor.
The plastic bit broke on the way too me and instead of getting them to send me another
one, which would be a waste of time, because I can actually glue this with this stuff here
which is liquid solvent cement or dichloromethane.
So the way this glue work is have to push the pieces you want to join together, and
brush the glue into the crack.
And it uses a process called capillary action to draw the glue between the two areas.
I've changed over to some longer machines screws.
Ok I'm going to stop here and wait for the next things to come in the post and carry
on later.
Ok another week has past and a load of other stuff has turned up to the studio.
Shielded crimps which I will be using to replace the wiring on the heat bed.
I've also got two different types of tape.
Kapton for printing on and one of heat insulation.
A few other nozzles and the thing I broke from the previous week a piece of threaded
rod with a hole in the centre with the PTFE for the filament to go through.
I am crimping on the insulated spade terminals – they fit on quite well but they are technically
not the correct fittings for the type of terminal on the heat-bed.
What I should really do is crimp the correct opposite terminal onto a piece of heatproof
wire, and solder that directly onto heat-bed.
But I think this is good improvement from what was already there so I'm going to stick
with it for now.
I'm placing a piece of borosilicate glass with PEI plastic on top.
This doesn't come with the 3D printer so I had to buy those separately and stick them
together.
I've made a separate video about the build platform and will link to that video in the
information card.
I levelled the bed manually with a feller gauge and then installed the software and
drivers.
It isn't as simple as plugging in and playing with this 3D printer, but the software set
up time wasn't that long or too difficult.
I'm not going to go over that install because it's documented in the instructions which
come with this machine, but I will make another video showing how I installed the updated
firmware called Skynet which will allow me to use the bed levelling probe.
It's really impressive and it seems to working quite well first time around.
The only problem is the fan.
This fan here is not running.
So this is my first print.
I don't know what this means in Mandarin but it looks pretty cool.
I had a few problems at the beginning because the filament didn't come out directly on the
bed.
I think the nozzle was a bit too high still and it looks a little bit loose so I'm going
to have to change some settings.
I'm hoping that just slowing it down will be enough.
But it's pretty cool.
PLA is a nice material to print with and the only other problem I had was the fan wasn't
spinning.
This piece here was a little bit too high and when it's in, and pushed all the way you
can see that's not turning.
But if i pull that down a bit it can turn.
To use the bed levelling sensor you need to install an updated firmware for the controller
called skynet, but because I am using a piece of borosilicate glass which has PEI - Polyetherimide
plastic stuck to it, it is too thick for the sensor to work.
So I will come back to that in another video.
This video has turned into another long one.
I will link to some of the relevant videos, sources and forum which have helped me while
construing this machine – and I will warn you now I have noticed there are different
build version depending where you look.
All I can say is please be careful if you decided to get this 3D printer.
If you don't like reading don't get into 3D printing because you need to read around
the subject – it's that simple.
There are a lot of essential improvements you need to do which will help with prints
quality, but also safety.
The main upgrade I did during this video was to use 2.5mm core heat resistant fibreglass
cables for the head bed and insulated terminals to connect to it.
I am also planing to use mosfets to connect the PSU to the heatbed and extruder heating
element.
I have to admit very impressed by the initial print and thanks again to Gearbest for sending
this out to me.
As I said earlier there'll be relevant link in the description bellow.
Don't forget to sacrifice a thumb and thanks again for watching.
-------------------------------------------
Random_Stock_TV vol.02 | Gute Arbeit Snacks - Duration: 1:40.
For more infomation >> Random_Stock_TV vol.02 | Gute Arbeit Snacks - Duration: 1:40. -------------------------------------------
Yêu Là Tha Thu Cover soái nhi - Duration: 4:33.
For more infomation >> Yêu Là Tha Thu Cover soái nhi - Duration: 4:33. -------------------------------------------
公告~~~~必看(打開CC字幕喔) - Duration: 0:34.
For more infomation >> 公告~~~~必看(打開CC字幕喔) - Duration: 0:34. -------------------------------------------
Очищение от негатива✦Как узнать, есть ли сглаз, и снять его самостоятельно. Наталия Правдина - Duration: 1:54.
For more infomation >> Очищение от негатива✦Как узнать, есть ли сглаз, и снять его самостоятельно. Наталия Правдина - Duration: 1:54. -------------------------------------------
Ипотечный кредит на долю квартиры - Duration: 4:23.
For more infomation >> Ипотечный кредит на долю квартиры - Duration: 4:23. -------------------------------------------
Pizza GONE WRONG - A ROBLOX Machinima - Duration: 3:11.
Pizza GONE WRONG - A ROBLOX Machinima
Fave: you know the eyes are the windows to the soul?
Falcon: would you like a peanut?
Fave: would i like a what?
Falcon: an almond?
Fave: dude i'm trying to go to dominos right now
Falcon: how about a pistachio?
Fave: i pistach you a question Falcon: okay just walk inside
*fave walks into dominos* Fave: ey, where's the cashier at?
*granny sitting at table* biggranny: i'm right here, fave
Fave: do i know you?
*biggranny behind counter* biggranny: may i take your order?
Fave: yeah i'd like a pineapple pizza, and a boneless pizza
biggranny: sorry, we don't have memes on our menu
Fave: what? you guys don't serve memes here?
biggranny: no, you should try going to Pizza Pizza
Fave: hold on, do I know you?
biggranny: i dunno, do you know yourself?
Fave: woahhhh *fade*
I BELIEVE I CAN FLYYYYYYYYYYYYY *fade*
Fave: i definitely know myself biggranny: now, think about it
*phone vibrates* Fave: hold on my phone went off
*FAVE EXPOSED* Fave: hey this guy named biggranny exposed
me, do you know biggranny *fave looks up*
*biggranny's ass on counter* Fave: oh
*fave grabs a slice of pizza* *fave shoves pizza*
biggranny: *screams* Fave: YOU'RE THE BIGGRANNY?
THE MORON WHO PASSED ME IN SUBSCRIBERS BY MAKING CRAPPY GAMEPLAY VIDEOS?
biggranny: CRAPPY?
AREN'T YOU THE ONE WHO HAS A DYING CHANNEL AND RAN OUT OF VIDEO IDEAS YEARS AGO?
Fave: AREN'T YOU THE ONE WHO NAMED YOURSELF AFTER A FAT OLD LADY
biggranny: AREN'T YOU THE ONE WHO WALKED IN HERE ASKING FOR MEMES?
Fave: well yes.. i am... biggranny: i love you fave
Fave: i love you more biggranny: bathroom?
Fave: yes *20 minutes later*
*flush* biggranny: that was great
Fave: Yes, Grandma.
*fade* *fade*
*fave walk into dominos* Fave: hi, biggranny000!
biggranny: hey, 6kenny6!
Fave: wanna be in a ROBLOX Machinima?
biggranny: no Fave: aww
biggranny: do you want some boneless pineapple pizza?
Fave: OH YEAH GRANDMA! *ding*
*fave and biggranny eating pizza* Fave: so, could we call this a bromance?
biggranny: a bromantic comedy Fave: bro!
biggranny: bro! *outro*
-------------------------------------------
【儒ㄦ(´౪`)】Jennifer形象大毀 ！還聞了超臭的洋蔥squishy《feat.Jennifer》 - Duration: 4:13.
For more infomation >> 【儒ㄦ(´౪`)】Jennifer形象大毀 ！還聞了超臭的洋蔥squishy《feat.Jennifer》 - Duration: 4:13. -------------------------------------------
Muskelkater - Wie entsteht er und was kann man dagegen tun? - Duration: 3:09.
For more infomation >> Muskelkater - Wie entsteht er und was kann man dagegen tun? - Duration: 3:09. -------------------------------------------
How to Get Signed by SPINNIN' RECORDS Talent Pool! (w/ Menshee!) - Duration: 10:36.
Hey guys, welcome to todays video it's going to be really, really sick because we're going
to be answering a question that I know has been on all of your minds.
How to get signed by Spinnin' Talent Pool.
Now, I may know some information on this but maybe I should call someone who's actually
been signed by Spinnin' Talent Pool.
Oh, I know who I can call...
His name is Menshee.
Now you may not know Menshee but here's a little bit about him.
Menshee is from Russia.
He's 33 years old.
He's been producing for 17 years.
And he likes to travel a lot to get inspiration.
Oh...
And his track "Never" was picked up and signed by Spinnin' Talent Pool.
Not to mention he also had a track on Armada too.
Now that you know a little bit more about him - Let's give him a call and find out the
answer to: How to get signed by Spinnin' Talent Pool.
How are you?
Thank you, I am fine, how are you?
Good, good, thanks for coming on.
Alright well let's get started with some questions.
We'll start with some easy ones.
How did you come up with the name Menshee?
I started with progressive trance music as Dennis Sander my second name but I decided
to make house music name a house music nickname for Spinnin' Records first a short name and when
you heard it you can keep it in mind: Menshee.
Yeah it's a really catchy name.
Do you have any tips for artists when they want to come up with a name?
I think it will be short and not something with numbers or symbols etc.
Not difficult to read and etc.
How long have you been producing music?
It was several years ago in 2010 when I released by first remix in progressive trance style
then I started to produce house music too it was in 2010 yes my first releases.
Can you tell us a little bit about your equipment and which daw and plugins you like to use?
Oh, I use only FL Studio.
I started with Fruity Loops 2, yes.
I use Nexus, I use Sylenth, Massive, and Spire maybe, Serum maybe is my favorite.
Yeah, Serum is awesome.
Who is your favorite DJ or Producer?
Actually, my favorite DJ & producer is Armin Van Buuren because I started to listen to
progressive trance music first.
Madison Mars a lot and Don Diablo I think maybe Curbi he makes loud sounds and
it's incredible.
What would you say that it's specifically that makes them so great?
Melodies I like the quality and etc.
I play in the clubs also, I am a DJ and I like how this music fits in the club
it sounds in the club it's really cool.
What is your favorite pizza?
I don't have a favorite pizza.
I like some with bacon because when you eat some without bacon it's a waste of money.
So, if you ever meet Menshee you gotta get him a bacon pizza.
How long have you used Talent Pool?
I used Talent Pool since 2015.
2 years yes 2 years.
I started with remixes but I had my first original track with Talent Pool wasn't until
the beginning of 2016 yes and I think my first success was with "Hit The Road".
Can you explain a little bit about when you got that email how was it how did you feel?
It was something like I got first support from Armin Van Buuren when he played my track
it was really cool I saw a message in my phone from Spinnin' Records I see oh, "Dennis hi
we wanted to use your track with Talent Pool" It was cool for me - Really awesome.
I rendered the file, I sent it with all of my information in the same minute when I saw
the message.
I would imagine that you would get it to them as fast as possible!
So the lesson is to always check your Spinnin' mail because it might not be spam they might
want your track.
Do you have a manger?
No, I don't have a manager I made it all by myself.
What do you think that it was about your song that made Spinnin' want your song?
What do you think you did in that track that made it stand out so much?
I don't know I think the track must be quality.
It's the same style maybe the mix of the styles like Spinnin' releases.
You've been producing for a while - Do you have any tips or advice for beginner or producers
who are just starting?
Yes, there was some mistakes in my career because I make a mix of progressive trance
music and when I started to make music I made a lot of remixes, a lot of tracks trying to
release it fast.
I think it's a mistake because if you want to reach success you can take your time.
Take your time, try to compare your quality with other quality.
So your biggest advice basically is to take your time and make sure you release quality
tracks that you're proud of.
Yes, yes exactly.
I noticed that you have a track with Patrick Moreno who's also been signed by a lot of
different labels like Armada and Revealed can you talk about how that collab happened?
He suggested to me to maybe collab.
Something like my style and his style.
He sent me a couple of references.
I heard it and I liked what he doing.
I saw that he released an Armada track and on other labels and I think he's a nice guy
with nice music why not because I got Patrick, he's a good producer I think it took three
or four months before a label, Eclypse Records agreed to release our track.
And it's a great track.
What do you have in the works right now?
I am working with a couple of tracks with Spinnin' Records also I have requests for
a couple labels with single tracks but it takes a lot of time.
Yeah.
I'm taking my time and making tracks.
I can make a drop in one day but then I listen to it and compare it with other tracks.
Then I make an arrangement and then I also compare that to other tracks.
I listen in headphones, maybe out of the home, maybe in the car, in the club etc and when
I understand the track is really cool, is really nice in quality I send it to the managers
or something.
Lot of comparing to make sure that the song sounds good on multiple speakers, on lots
of different you know, environments.
Very important...
Do you like cats?
Yes, exactly.
What's your cats name?
Fox - Yes he looks like fox I mean.
We're going to have to have a Skype with just our cats...
Ok hahaha.
Is there any, is there anything special about a Menshee track that makes a Menshee track
stand out?
Honestly, I don't have a unique style but when you heard from a lot of people oh man
really when I heard a track and I understand oh it's Menshee's track it's really cool.
When you, when you started producing maybe you start to copy maybe but then you reach
your own style.
So your saying after a while you get your own layout, you get your own sound from doing
a lot of tracks and you know continuing to try more songs that eventually you will have
your own foundation, your own thing.
Yes, I think so.
What's your favorite color?
Ahh ok.
My favorite color is deep blue.
Well thank you so much for doing this.
We'll put all your links and we'll tag you and everything else.
Have a good day, you too.
OK bye.
Alright bye Menshee.
Alright that was super dope.
I think that the biggest thing that Menshee would want us to take away from this video
is to make sure that your tracks are quality, that you take your time, that you get inspiration
from other big DJs, and that way you can get Spinnin' attention when you put your tracks
on Talent Pool and you send them to other labels.
I learned a lot, I know you did too so thanks again to Menshee for coming on this video.
And make sure you take a listen to some of Menshee's tracks.
I left all the Menshee links below.
If you guys have any ideas of who we should interview next or what topic you would like
us to cover.
Make sure you leave a comment below and I'll be checking them out.
And don't forget if you like Menshee and you like what he had to say - Give this video
a thumbs up.
And if you want to see more videos like this and you want to see more Kingsley like this
and you want to see everything - Don't forget to Subscribe.
Alright guys, I'm musicbyLUKAS, this is Kingsley - We'll see you later.
-------------------------------------------
8 Ball Pool Unlimited Coins and Cash - 100% Working links 2017 - Duration: 0:23.
For more infomation >> 8 Ball Pool Unlimited Coins and Cash - 100% Working links 2017 - Duration: 0:23. -------------------------------------------
【ガチャ動画】白猫プロジェクト KingsCrownガチャ110連 - Duration: 11:46.
For more infomation >> 【ガチャ動画】白猫プロジェクト KingsCrownガチャ110連 - Duration: 11:46. -------------------------------------------
BEAUTY BENEFITS OF POMEGRANATE PEEL POWDER II अनार के छिलकों के पाउडर के सौंदर्य लाभ II - Duration: 4:58.
Rubina is here just for you with an another fresh episode of F3 healthy life.
In my previous episode had shared some very effective face pack & home remedies of pomegranate peel powder.
Today also taking that conversation further I've brought some effective face packs & home remedies for you.
Let's move on towards our effective face packs and home remedies.
Our first pack is for anti-ageing face pack.
If your age is reflecting on your face,
With the growing age our facial skin have uneven skin tone, wrinkles & freckles
Our skin looks dull & dark then you can very easily hide your ageing with pomegranate peel powder.
And you can look 10 years younger to your age.
Take 2 tbsp pomegranate peel powder, 2 tbsp Milk and mix them well
Add the milk accordingly so that you get the thick paste.
Gently apply this paste over your face and neck and let it dry
Once its dry, wash it off with normal water
In case your skin is oily, use Rose Water at the place of Milk.
Follow this remedy on the daily basis
You'll notice that the effects of ageing are getting lost from your skin.
You skin is glowing,looking young.
Now there are no wrinkles, freckles, uneven skin tone, dullness & darkness.
Apply this face pack daily for 3 months & you'll notice that effects of ageing are gone & you look young.
Let's move on to our another remedy that is for blackheads, whiteheads & dead skin.
If you are suffering from blackheads, whiteheads & dead skin
Then pomegranate peel powder will be beneficial for your skin.
Take 2 tbsp Pomegranate Peel Powder add 1 tbsp Brown Sugar & 1 tbsp Honey in it
Mix all the 3 ingredients & apply it especially on your affected area of white heads, black heads & dead skin.
Especially on this T area.
Apply the paste, once its dry wash it off with normal water
Apply this face pack daily & within 1 week you'll notice
That the black heads, white heads & dead skin is completely removed.
Your skin is shining, glowing and it has got radiance.
Let's move on towards another home remedy, if you have problem of bleeding or painful gums
Take pomegranate peel powder on your finger tip and apply it all over on your gums.
Gently rub it on your gums with the help of your finger
Cover your teeth and your gums with this powder
Leave it for about 15 mins & then gargle with normal water
Follow this remedy for 15 days & you'll have relief in the problem of bleeding gums
And your teeth turns healthy now
So these were very effective home remedies & face pack of pomegranate peel powder
which I have shared with you.
I hope you like my episode & don't forget share you feedback's and comments.
Do like and share my videos on YouTube, Facebook,whatsapp & Twitter.
Do subscribe our channel, So that you can get more and more health benefits from us.
Take care of the health of yourself and loved ones too.
I promise that I'll be back with such effective home remedies & tips for you.
Till then take care.
-------------------------------------------
Be the LIGHT in DARK MOMENTS.... - Duration: 3:12.
Curacao say anger is be put down to bars
I am really excited to shoot this video with all of you because it will make you
a better person and they'll help you achieve your goals
do you know 300 million people of all ages are becoming the victims of
depression Buddha wanted that during the darkest moment we should focus on theme
tonight there are many moments in the life of each one of us when we think
like waiting giving up and the proven hearted society there will be people
nearest whether in our family or in a classroom or anywhere else you just need
a motivating word for to rise up is why can't we become that cool for them God
puts you in dark situations just to make you a better person and the one who is
worthy of the destiny he/she planned for because you are in a bad book by chapter
but he has a good plan for you you just need to connect the dots with him by
remaining happy which can be only if you help needy whenever you feel like
quitting oh and give food to needy you will feel better because of ultimate
universe intelligence whom we refer as Accord is on a mission to call issue and
to check how much you love the thing you do if you have ever seen an Italian
pizza maker you would have realize that before making the PISA your she looks of
the dough one rotates it in order to make it smooth and worthy of the
toppings in this case the dough is you toppings are such tests and the maker is
cord okay so don't think that he is preparing you to be eaten by his fellow
Rangers
no instead he just needs that guarantee that you deserve that place you dreamed
of because he may give you that early on but then you misuse it many a times we
are growing but not in the right path to make this more clear I would be sharing
a story a newborn baby was born in a hospital and soon after the doctors came
to know that the boy's head was a little tilted towards liver
so with a new tank the whole team gathered and open the head and doctor
manually tilted his head to desired position Sheamus with us we are growing
HP each other and each second but a head is not screaming in the right way that's
why God puts you in dark situations just to benefit you and make your head
screwed in the right way and it will take a lot of patience from you to go
through it remember you are in a bad book bad
chapter but I have a good plan for you so if you like this then check out my
other uploads - one share for more sentencing videos plus a comment would
be appreciated thanks for watching
then we live
-------------------------------------------
Xiaomi Redmi 4X 4G Smartphone from www.gearbest.com - Duration: 1:42.
Purchased from Gearbest, link in the description
-------------------------------------------
8) Extra English - The landladys cousin @ YoL - Duration: 24:24.
This is the story of two girls who share a flat in London
and the boys next door, Nick and his friend Hector from Argentina.
Bridget is interested in Hector
but Hector is very interested in Annie.
Annie doesn't know.
So will he get close enough to tell her?
Find out in Extra.
'Dear tenants,
'my cousin, your landlady, is on holiday this week,
'so I am in charge.
'The same rules apply.
'No pets, no parties, no visitors, especially boys.
'Yours, Eunice Mountain.'
Eunice Mountain? She sounds terrible.
Worse than the tarantula.
If that's possible.
Do you think she'll say no shelves?
She can't. They'll look fantastic.
'The timber shelves in clear lacquered beech veneer...'
'With six casters...'
'And a TV bench.'
Now, where shall we begin?
Annie, it's easy.
Rule number one. Always read the instructions first.
Well, that will only take a week.
OK, let's have a drink before we begin.
- Milk, Annie? - Yes, please.
'I owe you, Nick.'
There! Well, no milk. Would you like some sparkling water?
Right.
'I owe you, Nick.'
'I owe you, Nick.'
'I owe you, Nick.'
How dare he?
- Would you like some cola? - Thanks, Bridget, I was looking for that.
Nick!
Sorry.
Add it to the list.
Or ask your flatmate to buy your food.
Wow!
- You didn't know Hector was rich? - No.
I'll speak to you later.
Wow.
What are all these boxes?
Our new shelves, Hector.
I can help you build them. Where are the instructions?
Hector, my friend, rule number one.
Never read the instructions.
I see you have a note from our new landlady, then.
Eunice Mountain.
Eunice Mountain. I bet she's the same size.
Hello. It's Eunice Mountain.
Who am I? I'm Nick, from Flat B.
You want Flat A? This is...
Hello. Yes, this is Flat A.
Yes, I am Nick from Flat B.
Yes, I know this isn't my flat.
I want to see you downstairs now.
Sorry. OK. Right away.
Well?
Eunice Mountain wants to see me downstairs now.
Bad luck, man.
Oh, dear.
Ask her if she has any milk, bread and biscuits.
OK, so...
'First open box A and take out shelf number one.'
But which is box A?
This is box C.
And I've got box D.
I've got it. This is shelf number one.
No, Hector. This is shelf number one.
No, this is shelf number one.
This is a nightmare.
OK, Annie, read out the instructions.
'Put shelf one against the wall.'
Hector, I think the books will fall off.
So what's Eunice Mountain like?
You know, not bad.
Are you in trouble?
Probably.
I've got it.
'Put pole B on the left and pole A on the right
'and the shelf on top.' Bridget.
Like this, Hector?
Have you put up shelves before, Hector?
Many times.
Or do your servants do it for you?
- I'll do it! - No, no, no, I'll do it.
Drop! Drop!
I laugh at instructions.
That was clever.
It's OK. I can straighten it.
Stand back and watch the master at work.
Well done, Nick.
So where does this piece go?
Hi.
I'm Eunice Mountain, your new landlady.
Wow!
Hi.
Hello. I...
I am Bridget
and this is Annie.
Hello.
And this is Hector from Argentina.
Well, hello, Hector.
Hector lives next door with Nick.
I've met Nick already, haven't I, Nick?
Yes, that's right.
We need to talk about your rent. In private.
Great.
'Measure the distance between the shelves.'
Annie, hold this, please.
That's it.
And this should be it.
Hector, do you think that's correct?
These shelves are for mice.
Can I speak to you please, Hector?
So, Hector.
'One of the richest families in Argentina, the Romero family.'
There you are, Hector.
So why the secret?
Because I wanted you to like me, not my money.
Oh, Hector, of course I do.
Who else knows?
Nick.
I thought so.
But not Annie. Don't tell Annie...yet.
Why, Hector?
Because, Bridget...
- Because... - Yes?
I am in love with Annie.
Nick has entered the building.
So where are you going, looking like John Travolta?
He has a date with me, haven't you, darling?
Another date?
But that's three times this week.
Four.
We've been to dinner, to the theatre, to the cinema
and last night...salsa dancing.
Can you salsa?
I am the salsa queen.
Yeah, with two left feet.
- Pardon? - Nothing.
It sounds great.
What is it tonight? Ping- pong?
Tonight's it's karaoke.
And I am the karaoke queen.
Let's go. Bye.
I love you!
I am the karaoke queen.
I bet she sings like a toad.
So, Hector, where were we?
OK, I think I've got it, Annie.
I did knock, but the music was so loud, you didn't hear me.
I thought we'd have a little chat.
Rule number two. No underwear on the radiator.
It's dry now.
Give it to me. Give it to...
Thank you.
Let me repeat the rules.
No parties and no visitors.
Especially boys.
Especially boys from next door.
Especially Nick.
He's mine.
Get the message?
Yeah, we get the message.
See you later.
By the way, that shelf is not straight.
Bye.
Well, I have never...
What does she... Who does she think she is?
The landlady's cousin?
I know that, but no Hector and no Nick?
How dare she?
How is Eunice?
Problems?
She is very nice.
But?
But she's just not my type.
What do you mean?
Look. Presents.
More presents. Flowers. More presents. Chocolate.
And her energy. I'm exhausted.
Nick?
Let's go dancing.
Hector, get rid of her!
Get rid of her? How?
- Say something. - What shall I say?
Anything! Tell her I'm not well.
I've eaten a hedgehog. I've gone to the moon.
Nick, are you in there?
- Go on! - OK.
Hi.
You're not Nick.
No. Nick's hedgehog has gone to the moon.
Pardon?
Nick's hedgehog is not well. Nick is sad.
So he must come dancing to make him happy.
No! He cannot dance!
Why not?
He stood on the hedgehog without shoes. Very painful.
Oh! Very messy.
So he cannot dance.
Oh, that's a pity.
Well, never mind.
Yeah, sorry. Bye.
- You'll just have to come instead. - Pardon?
Come on, let's dance.
Do you think that's correct?
'And tighten the screws.'
Annie, you are a genius.
- Hi, Hector. - Hi, Annie.
What's the matter? Are you OK?
I am exhausted.
What happened?
- Last night Eunice and I... - Yes?
- She made me... - Yes?
..go dancing.
Annie, she dances like a rhinoceros.
Wow!
Annie! The shelves!
You finished them!
Oh, just a bit more measuring.
I will help you.
- Sorry. - No, sorry.
Sorry.
It's OK. It happens when people work together.
So, where were we?
'For the final shelf, take...'
Hector!
Help! Hide me!
- Eunice? - Eunice.
Oh, Bridget, save me.
- Why? - It's Eunice.
Nick? Oh, Nick.
There she is. She's too much.
I know you are in there, Nick.
Bridget, Annie, I said no boys.
Shall I get rid of her, Nick?
Yes, please. But how?
I'll think of something. Annie, let Miss Mountain in.
There you are, Nick.
And Hector.
Bridget, I thought I said no boys.
Yes, you did.
Especially boys from next door.
Yes. Yes, you did.
- Especially... - Nick. He's mine.
Oh, Nick!
Well, I... Just wait until I tell my cousin.
By the way, Hector, I've got a fax for you.
Please, give it to me.
It's from your father. It says...
'Coming to London to meet... the Prime Minister?
'My jet arrives at midday. Will phone. Father.'
Actually, Hector, I think you're more my type.
I don't think so, Eunice.
- Goodbye. - And don't slam the...door.
So, Hector, your father is flying to London in his private jet to meet the Prime Minister?
Well, they are one of the richest families in Argentina.
- So, Bridget, where were we? - No, Nick.
The trick worked. Eunice has gone.
Annie, I will buy you a million shelves.
Well, we'd better start measuring for them, then.
Next time in Extra...
Nick dresses up.
Bridget is working hard in television.
And Hector goes for an audition.
And Hector goes for an audition.
Không có nhận xét nào:
Đăng nhận xét