Thứ Hai, 27 tháng 11, 2017

Waching daily Nov 28 2017

Hi, my name is Timothy and I'm excited to be one of the chaperones to the 18

children who make up Choir 48.

I was in the 19th African Children's Choir.

Today, I would like to share with you the story of one of our children, Rebecca.

Rebecca comes from one of the poorest suburbs around Kampala called Boise.

She lives with her father her brother and her sister.

Her father is unable to provide for them the basic needs of life

and to give them a good quality education.

But, Rebecca loved to study she sometimes we would be able to attend school for a while.

But, then she would be sent home because her father was unable to

continue paying the school fees.

She sometimes would jump through the classroom window

back into class so that she could receive an education and continue studying

So, one day Rebecca told her father that she would pray for

an opportunity where she will be able to study for free without paying.

Her father knew and thought that this was totally impossible,

but Rebecca knelt down on the dirt floor and said a prayer and asked God for an opportunity to study.

Three weeks later Rebecca audition into the African Children's Choir

and today she is excited to be part of choir 48

where she will receive a free education.

For more infomation >> Voices for Africa 2017 | Rebecca's Story - Duration: 1:45.

-------------------------------------------

Butt Augmentation-Non FDA Approved Butt Augmentation-Dr.Hourglass - Duration: 7:00.

Hi, this is Dr. Hourglass, and welcome to another video in our channel Bootyman.

Today we are going to discuss: Non-FDA approved butt augmentation options.

In this channel, we will discuss everything you need to know about buttock enhancement procedures.

Welcome back!

There are many unlicensed practitioners that are performing non-FDA approved and illegal

buttock augmentation procedures.

The common non-FDA approved butt augmentation practices include:

1. Hydrogel butt injection

The hydrogel butt injection is a non-FDA approved practice that involves the use of a solution

of polyacrylamide and water to augment the buttocks.

It is called hydrogel injection because of the use of hydrogel of polyacrylamide.

This practice is extremely risky and has already resulted in the death and permanent disability of many patients.

The risks include kidney failure, nerve damage, blood clotting, respiratory complications,

allergic reactions, infection, and death.

2. Collagen injection

Also called PMMA butt injection, collagen injection is another non-FDA approved practice

undertaken illegally by many unlicensed practitioners.

The procedure involves the use of a filler called poly-methyl-methacrylate, which comes in the form

of small microspheres in collagen gel.

This injection causes extreme inflammation in the body.

The risks include infection, anesthesia reaction, allergic reaction, the formation of lumps on the buttocks,

granulomas and unsightly scarring.

3. Silicone butt injection

This procedure involves the use of liquid silicone to augment the buttocks.

The FDA does not approve it, which is why board-certified and experienced plastic surgeons

don't perform this procedure.

The results are often terrifying, both in terms of aesthetic and health.

The buttocks often become deformed after the surgery and the patient experiences

life-threatening complications and even death.

Several cases of deaths, hospitalizations, and permanent disabilities have already resulted

from the use of the illegal silicone butt injections.

The silicone used in this procedure is an industrial grade silicone, meaning anyone could pick it up

at the hardware store and perform the procedure.

The silicone injection is not sterile either, which means it can cause serious infections.

Other illegal butt augmentation practices include the use of materials like tire sealant,

mineral oil, baby oil, cement, and glue.

Unlicensed practitioners often perform these procedures on the black market.

Law enforcers have already arrested several gangs associated with this practice.

Patients considering buttock augmentation must be aware of these practices.

The only proven and FDA-approved buttock augmentation procedures are butt implant surgery

and fat transfer to the buttocks, more popularly known as the Brazilian butt lift.

Also, be sure to do your research and consult only with a board-certified plastic surgeon

if you are considering butt augmentation.

In this video we discuss: Non-FDA approved butt augmentation options.

Next week, will discuss: Can I use implants to correct asymmetric buttocks.

Remember to comment below, share this video, like this video, and subscribe to our channel

for more information, here at the Bootyman channel, only on YouTube.

Also log in to our website

for more information about your procedure and to see amazing surgical results.

Remember to log on to our Hourglass TV for more information about your surgical procedures.

On Monday we have Bootyman for everything related to buttock enhancement procedures.

Tuesdays: Wonder Breasts where we discuss topics related to cosmetic breast surgery.

Wednesdays we have Star Bodies. If you want to have a star body log on to our Hourglass TV.

Thursdays: Hourglass OR you're going to see me doing live surgeries with before and after pictures.

Also Shoddy where we discuss cases that require cosmetic surgical revision.

And Friday SuperHourGlass for topics related to have that Hourglass figure that you want.

And finally live broadcast surgeries every day of the week on Facebook live, Periscope and SnapChat.

All these and more in the Hourglass TV!

For more infomation >> Butt Augmentation-Non FDA Approved Butt Augmentation-Dr.Hourglass - Duration: 7:00.

-------------------------------------------

Ascension To The 5th Dimension & Sex - Duration: 2:31.

Ascension To The 5th Dimension & Sex

by Conscious Reminder

All of us who exist in this 3 Dimensional matrix have been under the illusion that institutional

religion is the only path to Spiritual salvation.

And, though it might work for some, it is not the only way.

In fact, if our ultimate aim is to get in sync with the divine and ascend to the 5th

dimension, we need to pay attention to some of the root level differences.

In this dimension, the sexual energies have been brutally divided into feminine and masculine;

which is not the natural way in which they exist in the ascended realm.

Patriarchy in partnership with Religion has been highlighting these differences, and suppressing

out sexual energies by labeling them as sinful and regressive.

The most common argument given in the favor of this orthodox mentality is that the spirit

is tied down by the body and punishing or starving the body somehow would allow the

spirit to be free and make the divine union.

When in reality, a practice such as celibacy is only one of the many ways of finding revelation.

Celibacy works on the principle of denying the body.

However the method we are talking about embraces the body.

Those who deny the body its pleasures are undermining and suppressing a very powerful

source of energy, which is sexual energy.

The heart, the mind, the soul and sex can all be united and this process is another

method of achieving salvation.

Sexual energy is a very potent energy, channeling which one can be awakened.

Tantra is the term under which all such practices come under.

Once we give ourselves up to this energy, we would be able to harness upwards through

all the chakras in our system.

In such a practice, the ultimate goal of lovemaking is not orgasm, rather it is to establish and

connection and form a union with the Divine.

For more infomation >> Ascension To The 5th Dimension & Sex - Duration: 2:31.

-------------------------------------------

Building "A Christmas Story" Lamp (the MANLY version) - Duration: 12:08.

Nope, not this time, maybe next project.

It's a major award.

5 drill bits later.

I don't like it.

It's a major award.

Fra-gee-lay, it must be Italian.

It's indescribably beautiful.

Well, it it it's a leg, you know, like a statue.

Ralphie!

Uh I have just the place for it, right in the

middle of our front room window.

Hey guys, thank you for watching.

A big thanks to Carolina shoe for sponsoring the build of this... this major award.

Carolina Boots version.

I'll leave a link to their website below, go check them out.

They make high quality work boots that I wear in the shop every day.

You should grab some during the holidays for someone special, they make for a major award.

Subscribe is you're new here, and I'll see you next time.

For more infomation >> Building "A Christmas Story" Lamp (the MANLY version) - Duration: 12:08.

-------------------------------------------

Reaction to Seahawks/49ers Game 2 (2017) - Duration: 4:49.

Okay.

Time to talk about the 49ers and Seahawks game and the 49ers ended up losing 24-13.

Um, I don't know what to make of it.

The offensive line was pretty bad.

I mean, it was the same old story and this is the what like that eighth loss in a row

that the 49ers have gotten against the Seattle Seahawks.

The last time they actually won a game against the Seahawks was in the 2013 season with Jim

Harbaugh and that was a long time ago.

It sucks to lose but what can you do right?

So now, the 49ers are 1-10.

Pretty much out of the playoffs.

They did not qualify for the playoffs officially.

They just got mathematically eliminated from the playoffs and not really surprising.

Who expected for 49ers to make the playoffs.

I had some people in the preseason saying that the 49ers was going to go 10-6 and make

the playoffs.

I was like, oh my gosh!

I love you, but at the same time ah that's really hard to say because the 49ers are not

that good.

But wow, that's all I can say.

The biggest thing I had to talk about was Jimmy Garoppolo.

I'm pretty sure everyone in Niner nation is talking about this guy because he was replacing

CJ Beathard the last minute of the game because CJ Beathard kind of got bonked by Michael

Bennett and hopefully CJ Beathard is alright.

I don't know if he's going to be starting against the Chicago Bears But, we're going

to be talking about Jimmy Garoppolo right now and he looked really poised he looked

really good.

And I know it's a prevent defense Seattle Seahawks they just wanted to get out of the

game and just go out with the W and aye, they look really good.

I mean he scored a touchdown to Louis Murphy.

I mean Louis Murphy ran all the way in to out or whatever I don't know one called make

it to the left and then score a touchdown at the end.

it was pretty cool to see it sucked to lose but it was nice, little optimism for Jimmy

Garoppolo and the 49ers.

And we might be seeing our franchise quarterback for the future and a lot of people are still

debating should we start Jimmy Garoppolo now and this week they played the Chicago Bears.

I don't know if they should start on to be honest with you because I mean he looked really

good but the same time, the offensive line is still bad.

If we put Jimmy Garoppolo out there like the next couple of weeks, he might be getting

beat up and I feel bad for CJ Beathard.

I keep saying that but if Jimmy Garoppolo is going to be in the starting line I'm kind

of concerned to be honest with you.

I don't want him to get beat up and then everyone can be like oh why is the Jimmy Garoppolo

not the Jimmy Garoppolo in New England, doing all this good stuff?

I mean the talent's not there.

So, I'm hoping they give him a little rest or deactivate him for the rest of the season.

That's just my opinion, I don't know.

I just want to do that just because the offensive line is bad, the talent is not there and plus

the 49ers are not making the playoffs this year.

So, what's the point of starting him anyways if the team is 1-10?

I just want to start CJ Beathard for the rest of the season if he's healthy hopefully he

can get rolling but I don't know if the health status for him is as of right now but hopefully

he'll be alright.

I just don't want to play him at all because of all the above reasons that I said about

the 49ers.

I see why people want to start him for the rest of the season just to see how he's going

to be for a franchise quarterback and what-have-you and seeing if he's worth the bucks that the

49ers can pay him because they can pay him a lot of money because they have a lot of

cap space and it's not going to be a problem franchise tagging him.

It's not going to be a problem signing him to a long-term deal and I kind of recommend

singing a long-term deal to be honest with you because if he plays on the franchise tag,

they don't want get the Kirk Cousins syndrome and have a really good season then they had

to overpay him like crazy for a long-term extension and they probably can't even sign

him.

I don't know what the situation with Kirk Cousins is in Washington but it's looking

pretty bad I would say and oh gosh if Washington, that was our quarterback if we couldn't really

get anyone I made a video a long time ago should we get Kirk Cousins in before I would

say yes, but since we got Jimmy Garoppolo, I'll probably say no now.

It's still not at the table but at the same time I still feel like Jimmy Garoppolo is

our man and I think that last minute drive against the Seattle Seahawks, it was a pretty

good one.

Sure, it was against the prevent defense or whatever.

They didn't really care too much but it was good to see something good.

I know everyone in Levi's Staduim was pretty excited.

I know everyone the Bay Area was excited to see Jimmy Garoppolo and I was personally I

was like, "oh my gosh he scored a touchdown.

We'll see what happens but anyways that's going to be pretty much it.

I mean I didn't really have anything else to take away.

I mean it was a typical CJ Beathard getting beat up, the offense can't really do anything,

the offensive line sucks.

The defense kind of did okay, but they really couldn't hold up because the offense is really

bad.

Same old story but the biggest story was Jimmy Garoppolo.

So, it was really exciting to see.

I'm really optimistic to see Jimmy Garoppolo now.

I don't know if I want to start him for the rest of the season.

I mean it's up to the 49ers and Kyle Shanahan to see what he wants to do.

We're going to see how CJ Beathard's health is as of right now I don't know as of Monday

evening but we'll see then.

So yeah, that's going to be pretty much it you guys please let me know what you guys

think about this game against the Seattle Seahawks.

Was it good, was it bad?

It was probably bad for everyone and also here's the poll section right here for my

prediction video against the 49ers and Seahawks game and most of ya'll said yes.

I wasn't really surprised I kind of had a feeling you guys we're going to say yes because

LOB is pretty much not there anymore but I just always felt that Seattle was a better

team overall even without Richard Sherman and Kam Chancellor.

That's why I picked him to win the game.

So, I guess I was right for the first time, yay!

And actually predicted the 24 points for the Seattle Seahawks correctly.

So, I feel proud of myself not really but whatever.

There's the poll right there if you want to look at it so you have it.

Please let me know how you guys feel about Jimmy Garoppolo.

Was it good, was it bad?

I'm pretty sure most of you guys are going to say good.

Are you guys excited for Jimmy Garoppolo in the future and do you think we should start

Jimmy Garoppolo for the rest of the season?

So, please put it down in the comments belo I will be happy to respond to you guys and

hopefully everyone had a good Thanksgiving and that's going to be pretty much it.

I hope you guys "Like," SUBSCRIBE.

Do whatever you want this.

It helps the channel get notice and I'll catch you guys up later.

I'll see you tomorrow when I predict the 49ers game against the Chicago Bears.

So, bye guys.

See ya'll soon!

For more infomation >> Reaction to Seahawks/49ers Game 2 (2017) - Duration: 4:49.

-------------------------------------------

Android Gameplay HD - King Arthur - Duration: 11:04.

For more infomation >> Android Gameplay HD - King Arthur - Duration: 11:04.

-------------------------------------------

【ゴルフライブ】ダフリトップを減らすカンタンな方法 - Duration: 3:08.

For more infomation >> 【ゴルフライブ】ダフリトップを減らすカンタンな方法 - Duration: 3:08.

-------------------------------------------

Model 44AP Wattmeter Overview - Duration: 8:26.

This video is about the Telewave Model 44 Wattmeter. What we have here

is a Telewave wattmeter in its case this is the case and inside we have the

watt meter and a booklet. The booklet here gives you the details of how to use

this device. We have a Model 44 AP which means it not only has the input and

output here but also a tap off at about 40 dB down to go to a spectrum analyzer

or modulation meter, whatever you need for monitoring modulation for example. So

that comes with it and it it has all the details we will be looking at some of

this in a minute.

This is padded in here so you can be assured that this thing is in a fairly

protected mode when you're using it there. All right so this is the meter and

it has various scales here which we'll discuss. It has switch for reverse,

forward, off and then this switch does 500, 150, 50, 15 and 5.

watts full scale. And the scales are on here and we'll go into details on that.

On the back we also have charts here. We have a VSWR chart. The VSWR chart

is forward power versus reverse power and you could find the standing wave

using that chart and that's on there permanently. This is also their

calibration factor so at various frequencies, this just has one

directional coupler in it, various frequencies it's been calibrated so we

know what the factor is to get the exact power level and we'll go into that in

some detail as well. As you can see we have a 500 watt scale on the meter

and then just below that is 150 watt scale and the next scale down we have 50

watts, and of course we also have a 15 watt scale for the low power devices, and

then for your HD's and so forth we have a full scale 5 watt. So you need to pick

the one that you need on the back of the unit there's a VSWR chart and also in

the manual. On this say you have 100 watts forward power and you have 2 watts

reverse power, you can follow the lines and determine what the VSWR is if we

want to take power measurement at 43 megahertz that gives us on the line here

12 percent. So 1.12 is what you multiply by and here we have the 43

megahertz we get 275 watts on the meter the correction factor is 12 percent or 1.12

which gives us 308 watts and that's plus or minus 6 percent of the

full-scale indication. Here we have some other common power correction factors 24

megahertz ham band, 27 megahertz TV band, 28 megahertz ham band, the 30 to 50

megahertz public service and ham radio bands, and the FM broadcast band from 88

to 108 and of course you can go anywhere on the curve to get into any other that

you need. While you can calibrate this unit using the following diagram on the

bottom, you need a good calibrated in- line power attenuator and a power sensor

that's also calibrated in order to do this correctly. We recommend that you

actually send it to the factory for any calibration needs. We do give you the

diagram of where the various resistors and so forth are to make these

calibrations and as you see on the PC board there

there's also indication of what power range you're dealing with, but again, it

would be preferable to have our calibrated system at the lab in Telewave

do this for you and you can contact the factory for

calibration requirements. I've got a test setup here to measure power using the

wattmeter. I have a dummy load 100 watt then we load 51 inch cable which is

correct for the frequency we're at it which is 146.76 over here.

Here's the meter it's set to forward power and it's set to 50 Watts. Key it up and we

get about 26, 25 watts which is what this radio is set to. It

has 10 watts, 25 Watts, and 50 Watts as its settings. So let's take a look at the

reverse power well I just keyed up and nothing happened. Well that's because the

standing wave is very low because this dummy load has about a 1.2:1 or better

standing wave so let's go to a 5 watt scale to see if we can see anything at

all and in even at that we see nothing at all to speak of might be a little

flicker there. So we're not seeing any kind of a standing wave on this

particular unit. Okay, i've got a new test set up here with two dummy loads in

parallel with a T-connector and meter over there and of course the radio over

here. I'm zoomed in on the meter so you can see it a little better

we're on forward power and 50 watts as you can see by the indicators here and

key this up and look at the third scale down there, which is the 50 watt scale

and we're at the 37 and a half watts. Now we flip this over to reverse power, leave

it at 50 for the moment see what happens. Now we're down in the red that means

that it's in an area where your accuracy is not that good.

So we'll change it to the 5 Watt scale. On the 5 watt scale, which

is the bottom scale, you see that we have about 3.25 Watts

With 37 and a half

Watts on the bottom scale there and 3.25 on a top scale if

you go up the chart and across you see that we're at about 1.9:1

which is very close to two to one and of course we do have cables in there

and so forth so that may you make some difference, but anyway that's how you

determine the standing wave. In review, the specifications for this meter, the

Model 44A or 44AP are as follows, 20 - 1000 megahertz. 5, 15, 50, 150, and 500

Watts full-scale. 50 ohms nominal. 1.1:1 is the VSWR max for

the device. Sampling ports 40 dB down plus or minus 2 dB for monitoring

purposes. Comes with a standard N-Female on each side you can get UHF connectors

DIN connectors, TNC's, BNC's, as options. Sampling port is a BNC. Your

accuracy is plus or minus 6 percent if you use the correction factors and above

150 megahertz it's plus or minus 6 percent overall

For more infomation >> Model 44AP Wattmeter Overview - Duration: 8:26.

-------------------------------------------

XYZprinting Nobel Superfine - First Time Printing - Duration: 5:11.

XYZprinting Nobel Superfine - First Time Printing

Cut off the packing belt and tape

Remove the carton

Remove the protection at the top(including accessories) and around the printer

Remove the tape and open the bag

Lift the printer, and unwrap it from the plastic bag

Lift the cover carefully and remove the wrapping film

Disassemble the accessory tray and take out all accessories

Before printing with Nobel Superfine 3D Printer, be sure to get all bundled accessories ready

Keep original packaging material in the event of sending your unit back for repair

Connect power adapter, power cord to the printer(The power jack is on the back of the printer)

Switch on the printer(The power switch is on the side of the printer)

Select UTILITIES on the printer LCM

Select MOVE PLATFORM > TO TOP > YES to raise the platform

Remove the protective materials on the resin tank

Assemble the nozzle cap and the inner tube

Shake the resin bottle for about 10 seconds

Replace the original bottle cap with the assembled one, and tighten the cap securely

Put the bottle into the bottle slot

Remove tape on tubes, and install the filling tubes

Attach the black tube to the thick nozzle firstly. Then attach the transparent tube to the thin nozzle

Push all tubes down

Select UTILITIES > REFILL RESIN on the printer LCM

Press and hold the UP key to infuse resin into the tank

Release the UP key until the resin reaching the Max mark on the resin tank

The printer is ready to print

You can send file to printer via PC

Connect the printer to your PC with the USB cable

Install the printing software XYZware_Nobel fromthe bundled USB flash drive

Import 3D objects to XYZware_Nobel

Press Move to move object on proper location

Press Rotate to adjust the angle of the object

Press Support to add proper support

Press Print to set up the printing parameters

Select desired Layer Height

Set the Material and Resin Type based on the resin cartridge installed on the printer.

Confirm all settings are correct and hit Print to proceed

Once the file is sliced, you can start to print

You can also print via USB flash disk

You need to prepare a sliced .3wn file and store in USB flash disk firstly

Import 3D objects to XYZware_Nobel and set up the object paramenters

Press Export to set up the printing parameters

Hit Export to proceed

Export the file with .3wn format and desired file name

Store the file in USB flash and plug the flash drive into the USB port on the front of the printer

Select prepared sliced .3wn files via PRINT FROM USB on printer LCM and press YES to print

The Noble Superfine 3D printer can also print wirelessly

You can do WiFi setting via the printer operational panel directly

Select SETTING on the printer LCM

Select WIFI > CONNECT NEW

Wait for available wireless network scanned by the printer

Choose the desired WIFI network from the network scan list

Press [OK] and select ENRER PASSWORD to go to password input mode

Use [HOME] to switch input mode

[ABC]: Capital English letters mofe; [abc]: Lowercase English letters mode

[123]: Arabic numerals mode; [@#$]: Special symbols mode

Use [Up/Down] to choose letters, [Right/Left] to move digits

Enter password with the control panel and press[OK] to activate the WIFI function

WiFi connection can be set up through XYZware_Nobel installed on PC.

Choose the WiFi network which your printer connects to from the network scan list

On the main page of the XYZware_Nobel, press Printer Monitor in the lower right corner

Press My Printer

Press Wireless Setting

Press Scan and select the desired WIFI network from the drop-down list

Enter WIFI password and press Start wireless connection

Once the printer is WiFi connected, the printer IP is shown here

Follow the instruction that print via PC to do print setting

Place the cover of the printer before printing

The printer is under printing

The printing platform will be raised automatically after printer finish the task.

Remove the cover after printing and turn the platform locker counterclockwise until it stops

Pull the platform to remove it

Wear gloves and use the scraper to remove print

Soak the print in alcohol and shake for around 5 minutes

For printouts with support, please cut off the extra structures with pliers when the print is dry

Get familiar with all operation steps, you can easily get started with Nobel Superfine 3D printer

For more infomation >> XYZprinting Nobel Superfine - First Time Printing - Duration: 5:11.

-------------------------------------------

Farruko En ISRAEL Vestido de Gucci , BAILA, CANTA, REZA (JERUSALEM) - Duration: 3:57.

For more infomation >> Farruko En ISRAEL Vestido de Gucci , BAILA, CANTA, REZA (JERUSALEM) - Duration: 3:57.

-------------------------------------------

Jessica Alba - Sus 10 Reglas del Éxito (Subtitulado) - Duration: 8:01.

For more infomation >> Jessica Alba - Sus 10 Reglas del Éxito (Subtitulado) - Duration: 8:01.

-------------------------------------------

Florida's Finest Criminals #17 - Duration: 15:32.

Hey guys it's me maggie j finally back in the studio and getting, to do my third favorite thing

produce the best Florida-based news content show ever

Could tell you all the reasons why I took so much time off

But, i've got a list of florida's finest from thanksgiving weekend and i think that's a lot more interesting,

So forget the excuses, here is what you came for

unless you came for dramatic Thanksgiving dinners or Black Friday fights

Somehow Florida managed to not be the shame of the nation this holiday

and I am so proud of y'all

Well... some of you l

Last week a woman in New Port Richey woke up from an afternoon nap and found Russell Smith

asleep on her kitchen table

authorities arrive shortly after and pieced together what happened

while the woman was sleeping Smith walked into her home poked around a bit took a few of her prescription pills

climbed into bed with the sleeping homeowner for a time and later

cracked open a beer before curling up on the table for a little nap

This story makes my skin crawl.

How long was he in her house???

Smith was taken away.

I could not find a list of his charges but he has broken into homes in New Port Richey area before

stealing items like jewelry and credit cards

I'm so glad this story ended the way that it did with this scumbag being discovered while he was sleeping

and not in a more horrific way.

The homeowner however was rather annoyed this guy drank one of her Yuengling's

instead of the Busch beer that she had in the refrigerator.

You gave him a choice...

would have been more concerned about this chump being it's been with me but we're all entitled to our own priorities.

She does suggest that we all lock our doors

even during the day and I cannot disagree with that

Lock your doors, guys.

Do you want another reason to lock the doors?

How 'bout this guy?

A neighborhood surveillance camera caught a man checking doors one night last week

But all the doors were locked so he was unable to gain access to anyone's property.

The next night the same man was up to the same tricks in a different neighborhood

and finally found a car that was unlocked.

Unfortunately for him that car was an unmarked cruiser and inside the car

were several Pasco County Sheriff's Deputies.

Why were there several deputies inside of an unmarked car in the middle of the night?

Nobody asked that question at the press conference so I don't know.

But they caught this nuisance, Steven Titland and are now charging him with loitering,

prowling, attempted burglary, and seven counts of auto burglary from the video from the night before.

Are criminals ever going to get a clue that cameras are everywhere, just, waiting to catch them?

Man I hope not because videos are like gold in this here studio.

For some reason I cannot find the names of these people

which happens a lot more often in this area of the state than I would like

so if anybody knows who these people are or where i can find more police information about stories out of Niceville

please send me some info i'll leave my email in the description below

anyway a Niceville couple who is probably not a couple

had to get police involved for an argument they may or may not have been having.

From what I can piece together, the woman lives in the apartment and was letting the man stay with her for a couple of weeks

She went to walk her dog at some point and her guest either chased after her

or came running up to her grabbed her aggressively by the arms and

Somehow removed her phone from her bra.

I don't think the two acts could have been done at the same time

Since you need two arms to aggressively hold on to someone and another to snatch away from them, but whatever.

He grabbed her got her phone and her bank cards and house keys then ran into the apartment and-

the story says shut the door not sure if he locked it to keep her out or just ran inside.

When police arrived the woman said she did bite the man to get him off of her but he had apparently

bitten her back and a witness overheard her during their kerfuffle in the yard

saying, i'm paraphrasing, "You effing bit my tit"

The guest claims he'd been staying with the woman for a few weeks and was trying to get back to Tennessee

but she had broken his phone, so he needed to use hers

Obviously why he was snatching it from her

Later he told officers he'd never even had the woman's phone

Which I'm sure was the end of any kind of sympathy the officers might have had for this guy

given the different versions of the story he was telling plus the witness accounts and the visible marks and bruises on the woman

He was arrested and charged with misdemeanor battery by touch or strike

My inquiring mind wants to know why did she take her credit cards and keys to walk the dog?

Did she not trust this dude to leave her wallet and keys behind in her own apartment??

Some people get themselves into some shitty situations just trying to be nice.

You won't find me falling into that trap

No, sir there are no guests allowed in my house and that has been a rule for many, many years.

Protect yourself y'all. Be more of an asshole.

That is advice guaranteed to reduce the drama that surrounds you.

In case you are thinking their life has gotten a bit too comfortable lately here is a story

that will haunt you at 3:00 a.m. while you're sitting on the toilet

A woman in Palmetto was cleaning her bathroom when she saw a spiny tail inside her toilet

Taking no chances, like a woman who's NOT going to get attacked by a monster from the toilet

She slammed down the lid and grabbed some bricks to weigh it down

She then headed to facebook to ask for some help from her friends

Someone did show up to help her bringing a pair of gloves a net and a cooler and

Inside the toilet the women found an iguana who is suspected of being a pet that someone flushed

but it managed to swim its way back up the pipes into this woman's toilet.

The iguana was removed and is in the custody of a reptile farm near the area.

This is the second story about a lizard in a toilet that i've come across this year

and i'm starting to get a little worried.

You people who think you want to be exotic pet owners but wimp out when the going is difficult

you are creating a huge problem in this state.

Forget gun control what we really need is some pet owner control

Not everyone should be allowed to have a pet.

Especially not snakes or lizards

Stop releasing them into the wild and flushing them down the toilet you jackasses!

At around 8 p.m on Friday night a Customs and Border Patrol agent contacted the Monroe County Sheriff's Department

To notify them of a car driving erratically on the Overseas Highway down in the Keys.

The vehicle was reportedly going 15 miles over the speed limit and tailgating another vehicle.

The officer was given permission to stop the vehicle and pulled over a blue 2017 Hyundai

The driver, Meshack Rushun Walker of Miami, said the car was a rental and while digging through the glovebox

for his papers the border patrol agent noticed a number of citations.

He asked to see the citations which included two speeding tickets a

minor's seatbelt ticket and one for passing in a no passing zone.

The border patrol agent also noted he recognized walker from an arrest in october for marijuana possession and

During the stop the car smelled of marijuana

A woman and two children were in the backseat and were allowed to leave the scene

despite officers finding 7.2, grams of cocaine

4.3, grams of crack cocaine and 17 capsules that tested positive for ecstasy

and a small amount of marijuana inside the car.

Walker has been arrested and charged for the drugs.

Controversial Opinion Alert!

Why is there no charge for this woman who is riding around in a speeding car full of drugs with her children?

police do not start putting the screws to these women who knowingly endanger themselves and their children

by spending their time with dangerous individuals,

They are never going to learn they shouldn't go joyriding with their children (or anybody else's children)

in a car full of drugs while speeding and driving recklessly across a bridge.

How many times does a woman have to pay her own bail before she starts

evaluating the caliber of people she surrounds herself with?

Lessons need to be learned and they start with not letting stupid people get away with minor charges

simply because they're females

Scare these women straight before they become felons instead of just accessories.

There is a huge double standard between men and women in the judicial system and I find it appalling.

If you are endangering your children, man or woman, you deserve to be brought up on charges.

That is my new segment called Controversial Opinion Alert

I made a fun graphic for it so you would know every time it's coming.

You can feel free to skip past them or come at me in the comments.

I am down for discussion let's talk about it!

Sometimes I want to talk about stories that are not

Florida related but they are so spectacular, I feel i've got to share 'em,

so this is a segment i'm going to call "Surprisingly, Not Florida"

A couple in Washington had a bit of an accident that I think Florida Man would applaud for

Michael G. Tonkin and Daisy L. Laroque were both completely naked

while driving around a town in Washington state.

He is suspected of being drunk and I'm going

to assume that she was also drunk since I cannot fathom how a young mother would want to go anywhere naked

especially in Washington in November

But I digress. Oh! I have pictures too. This is the couple.

He's allegedly drunk, they're both naked and despite traveling down a road in full view of

anyone else driving by they decide it's time to get busy right now

Miss Daisy crawled into Michael's lap while he was driving and got him so

distracted he missed the turn and ran right into a tree

Witnesses were on hand to see this happen including watching both naked idiots spilling out of the car immediately after

authorities arrived took Daisy to the hospital for a broken pelvis and took Michael to jail for a suspected DUI

which would be his fourth offence at the ripe old age of 23

They are also charging him with vehicular assault and child endangerment.

I hope they apply that last charge at Dumbass Daisy as well since she was a participant in

everything that led to crashing into a tree with a three-month-old child in the backseat

Don't be sexist about this Washington state

And take that other fool's license away like you should have done after his first offense.

Also coming from the Surprisingly, Not Florida files

Mike Hughes of California has been attempting to prove the earth is flat

By launching himself in his homemade rocket high enough so he can prove finally that the earth is not

some big ol sphere hanging out there in the ether

unfortunately his permit has been denied

Or some shit i could not figure out what the exact reason is

There's like FAA and NASA, I can't figure out the exact reason but he has rescheduled his launch to later this week

which

He expected to happen since "This is what happens anytime you have to deal with any kind of government

agency" you can't really disagree with that statement but i hope the government gets off his back

and lets him launch. I cannot wait for the exit interview with this guy, if he survives

so he can finally give us the truth.

I will be following this situation very closely in case you are also wondering if the earth is flat.

I'm gonna hear to be part of the conspiracy

We will all find out the complete truth if this guy is successful so fingers crossed y'all history is about to be made

Or confirmed.

Either way we're gonna find out something

Finally a lovely story about a scuba diver who needs some assistance with a thing she bound

Jennifer Herr found a GoPro camera while scuba diving near Turtle Beach in Siesta Key

It took a bit of work to release the camera from the barnacle-encrusted case but surprisingly the camera works just

fine and the photos and videos of the previous owner are still on there

Jennifer wants to return this camera and its memories to the owner here is a photo of the family.

I've-I'll include links this i couldn't find a good photo of just the family i wanted to blow it up big but this is the

best i could do i

would love for this family to get their camera back

So be sure that you share this video with all of your friends and family so we can check this off the to-do list

maybe even before christmas

That's all the stories that I have for today so you can click away now because I'm just going

to ramble for a couple of minutes.

I am, so happy to be back even though I did not get done all the studio improvements that I wanted

my lighting is still shit but I just love making videos

And bringing you the craziest Florida stories that I could find.

I'm going in a slightly different direction or

Trying to at least and I'm going to be making more videos each week.

I'm not sure if i can make a video every day

That is like a lot of work and if Florida Man and Woman decide to take a few days off

content is gonna be weak but you'll definitely be seeing a lot more of me every week if you're into that sort of thing and

I'll be bringing you more than just Florida's Finest criminals so be sure to like this video,

share it with all of the other lovers of Florida that you know, and keep coming back for more videos

about, Florida and what really matters to Floridians

Thank you for watching and subscribing and sharing and for being your amazing self.

If you have any comments suggestions submissions or even sponsorship opportunities

please send them by email. Oh, i made a graphic for this please send them by email to mostlyjustified@gmail.com

if you like this content and want to help me continue producing the best florida based content there is

consider becoming my patron on Patreon.com and supporting this channel on a monthly basis

So Mr. Maggie can stop threatening to shut down my studio and move the furniture back into the living room.

There's no pressure though I'll shoot this show in a closet if i have to but the lighting will be even more terrible than this

Y'all go and enjoy your day, now. Thank you for watching and don't forget to be awesome!

For more infomation >> Florida's Finest Criminals #17 - Duration: 15:32.

-------------------------------------------

14 displaced after fire in Wilmerding - Duration: 1:16.

For more infomation >> 14 displaced after fire in Wilmerding - Duration: 1:16.

-------------------------------------------

Havana- Camila Cabello | Cover - Duration: 3:56.

heyyyyy

Havana ooh na na

Half of my heart is in Havana, ooh na na

He took me back to East Atlanta, na na na

Oh, but my heart is in Havana

There's something bout his manners

Havana, ooh na na

He didn't walk up with the "how you doin?"

When he came in the room he said

there's a lot of girls I can do with

but I cant

I knew him forever in a minute

and papa says he got malo in him

He got me feelin' like...

Oooo Ooooh ooh, I knew it when I met him

I loved him when I left him

Got me feeling like

Oooo oooh oooh, and then I had to tell him

I had to go, oh na na na na na

Havana, Ooh na na

half of my heart is in Havana, ooh na na

He took me back to East Atlanta, na na na

Oh, but my heart is in Havana

My heart is in Havana

Havana

I knew I was there when I read the sign

I knew it was him when he hugged from behind

He put in the work but its in the streets

and this is the part that my daddy told me

got me feeling like

Ooo ooh ooh I knew it when I met him

I loved him when I left him

Got me feeling like

Oooh oooh ooh and then I had to tell him

I had to go, oh na na na na na

Havana oh na na

half of my heart is in Havana oh na na

he took me back to East Atlanta, na na na

Oh but my heart is in Havana

my heart is in Havana

Havana, ooh na na

uh uh

take me back back back back (Havana oh na na)

take me back back back back (havana ohh na na)

Ooo oooh oooh

Ooooooooo oooh ooh (Havana oh na na)

Ooooo oooh ooh

Take me back back back back

uh uh

Havana ooh na na

Half of my heart is in Havana Oh na na

He took me back to East Atlanta, na na na

Oh but my heart is in Havana

my heart is in Havana

Havana, ooh na na

take me back back back back

ooooo

Oooo

yeahhh

Ooooo ooo oooh ooh

For more infomation >> Havana- Camila Cabello | Cover - Duration: 3:56.

-------------------------------------------

50 Small Bedroom Design Ideas for Kids - Duration: 6:51.

Many parents are faced with the problem of furnishing small-scaled kids' rooms.

The littlest members of the family are usually given the littlest rooms but still have a

whole host of toys and games to store away, as well as needing allocated areas for homework

or crafts, depending on their age, and then there comes the inevitable sleepovers that

present a whole new set of space issues!

take a look at this 50 small bedroom design ideas for kids.

For more infomation >> 50 Small Bedroom Design Ideas for Kids - Duration: 6:51.

-------------------------------------------

Bali volcano on brink of 'major' eruption - Duration: 1:34.

Now for our look at stories making headlines around the world..... and we start with Indonesia…

Thousands of people are evacuating their homes in Bali as a volcano spews heavy ash clouds,

with a larger eruption expected soon.

With more on this and other stories we turn to our Ro Aram

Aram… what's the latest?

Well Semin… the volcano alert is at its highest level of red and that has caused flights

to be canceled as the ash poses a deadly threat to planes.

The island's main airport is also closed, leaving thousands stranded.

It was meant to reopen on Tuesday morning, local time, though officials said the situation

would be reviewed every six hours.

Tens of thousands of residents have fled their homes as Mount Agung is hurling clouds of

ash into the atmosphere.

Lava is also welling up in the crater, with explosions being heard more than a dozen kilometers

away.

As well as issuing the highest alert level, the National Disaster Mitigation Agency has

also expanded the danger zone to 10 kilometers from the previous seven and a half, as it

expects a larger and imminent eruption.

That means the danger zone now affects 22 villages and about 100-thousand people, but

only 40-thousand of them have evacuated.

Some say they still feel safe and others do not want to abandon their livestock.

Indonesian authorities say they may have to force those staying put to leave the area,

adding officials were sweeping the exclusion zone to check for non-evacuees.

Không có nhận xét nào:

Đăng nhận xét